|
Description |
Downloads |
Specs |
Ordering |
|
![S1081 SPST Square Momentary Black Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1081.jpg) |
S1081 ROHS
|
|
- Contact rating : 3A @ 250V AC
- Mounting Hole Dia. : 12mm
|
|
SPST Momentary with a black cap. |
![S1083 SPST Square Alt Action Black Solder Tail 125V Pushbutton Switch](https://images.altronics.com.au/thb/s/S1083.jpg) |
S1083 |
|
- Contact rating : 3A @ 125V AC
- Mounting Hole Dia. : 12.5mm max. Panel thickness: 5.0mm
- Contact Resistance: 50mΩ Max.
- Insulation resistance: 500V DC 100MΩ/minute
- Dielectric Strength: 1500V AC 1 minute
- Electrical Life: 20,000 make-and-break cycles at full load.
|
|
SPST Alternate action switch with a black cap. |
![S1084A SPST Momentary Black Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1084A.jpg) |
S1084A |
|
- Contact Resistance: 50m Ohm max
- Insulation Resistance: DC 500V 100M Ohm min
- Dielectric Strength: AC 1000V/1 minute
- Rating: 1.5A 250V
- UL Approval: 1054
- Panel cutout: Ø12.7mm
|
|
Low profile black push button switch with solder tail connection. |
![S1085 SPST Momentary LED Green Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1089.jpg) |
S1085 |
|
- Colour: Green
- Type: SPST
- Action: Momentary
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
Switch type:Solder Tail SPDT
Contact rating:1.5A @ 250V AC
Contact resistance:< 50m Ohm |
![S1086 SPST Momentary LED Red Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1086.jpg) |
S1086 ROHS
|
|
- Colour: Red
- Type: SPST
- Action: Momentary
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
Switch type:Solder Tail SPDT
Contact rating:1.5A @ 250V AC
Contact resistance:< 50m Ohm |
![S1391 SPDT Momentary Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1391.jpg) |
S1391 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
![S1392 DPDT Momentary Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1392.jpg) |
S1392 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
![S1393 SPDT Momentary PCB Mount Pushbutton Switch](https://images.altronics.com.au/thb/s/S1393.jpg) |
S1393 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
![S1395 SPDT Mom. 90 Deg. Low Profile PCB Pushbutton Switch](https://images.altronics.com.au/thb/s/S1395.jpg) |
S1395 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max.
- Initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 MΩ min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
![S1398 SPDT Mom. 90 Deg. PCB Mount Pushbutton Switch](https://images.altronics.com.au/thb/s/S1398.jpg) |
S1398 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max.
- Initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 MΩ min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
![S1405 SPST Mom. Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1405.jpg) |
S1405 ROHS
|
|
|
|
Momentary, 1.5A rated @ 250V AC |
![S1493 SPDT Mom. PCB Mount Sub-Mini Pushbutton Switch](https://images.altronics.com.au/thb/s/S1493.jpg) |
S1493 ROHS
|
|
- Contact Rating: 20mA @ 20V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
![S1495 SPDT Mom. 90 Deg. PCB Sub-Mini Pushbutton Switch](https://images.altronics.com.au/thb/s/S1495.jpg) |
S1495 ROHS
|
|
- Contact Rating: 20mA @ 20V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
![S1498 SPDT Mom. 90 Deg. PCB Sub-Mini Pushbutton Switch](https://images.altronics.com.au/thb/s/S1498.jpg) |
S1498 ROHS
|
|
- Contact Rating: 20mA @ 20V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
![S1660 SPDT Round Green Push Button Switch](https://images.altronics.com.au/thb/s/S1660.jpg) |
S1660 |
|
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min
- Electrical rating: 250V AC 5A
- LED: 12V (inbuilt resistor)
- Dielectric strength: 2kV AC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
|
|
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min
Electrical rating: 250V AC 5A
LED: 12V (inbuilt resistor)
|
![S1670 SPDT Mom. LED Red Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1670.jpg) |
S1670 ROHS
|
|
- SPDT Momentary Action - Red
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Red
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC 5A
LED: 24V (inbuilt resistor)
Dielectric strength: 2kVAC, 50Hz, 1 min
Insulation res |
![S1671 SPDT Mom. LED Green Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1671.jpg) |
S1671 ROHS
|
|
- SPDT Momentary Action - Green
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Green
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC 5A
LED: 24V (inbuilt resistor)
Dielectric strength: 2kVAC, 50Hz, 1 min
Insulation r |
![S1672 SPDT Mom. LED Orange Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1672.jpg) |
S1672 ROHS
|
|
- SPDT Momentary Action - Orange
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Orange
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC 5A
LED: 24V (inbuilt resistor)
Dielectric strength: 2kVAC, 50Hz, 1 min
Ins |
![S1673 SPDT Mom. LED White Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1673.jpg) |
S1673 ROHS
|
|
- SPDT Momentary Action - White
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - White
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC 5A
LED: 24V (inbuilt resistor)
Dielectric strength: 2kVAC, 50Hz, 1 min
Insulation r |
![S1674 SPDT Mom. LED Blue Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1674.jpg) |
S1674 |
|
- SPDT Momentary Action - Blue
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Blue
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC |
![S1675 SPDT Mom. LED Yellow Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1675.jpg) |
S1675 |
|
- SPDT Momentary Action - Yellow
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Yellow
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC |
![S1700 DPST Mom. Red Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1700.jpg) |
S1700 ROHS
|
|
- Colour: Red
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove |
![S1700A DPST Mom. Red Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1720A.jpg) |
S1700A ROHS
|
|
- Switch Type: Momentary
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical Life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
![S1702 DPST Mom. Green Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1702.jpg) |
S1702 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
![S1702A DPST Mom. Green Illuminated Solder Tail Pushbutton Switch](https://images.altronics.com.au/thb/s/S1702A.jpg) |
S1702A ROHS
|
|
- Switch Type: Momentary
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical Life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |