|
Description |
Downloads |
Specs |
Ordering |
|
 |
S3224 ROHS
|
|
- Switch Type: SPST
- Contact Rating: 10A @ 250V AC
- Panel Cutout: 27.6 x 13.8 mm
- Electrical Life: 20,000 Cycles
- Mechanical Life: 100,000 Cycles
- Contact Resistance: <50mR
- Insulation Resistance: >100MR
- Dielectric Strength: >1500V AC 1 Minute
|
|
Switch Type: SPST
Contact Rating: 10A @ 250V AC
LED (S 3226): Red, 1.8V DC
Panel Cutout: 27.6 x 13.8 mm
Electrical Life: 20,000 Cycles
Mechanical Life: 100,000 Cycles
Contact Resistance: <50mR
Insulation Resistance: >100MR
Dielectric Strength: >1500V AC 1 Minute |
 |
S3300 ROHS
|
|
- Temperature Range: -10°C to +65°C
- Carry Current: 1 Amp max
- Switch Capacity: 0.1 A @ 50V AC/28V DC
- Contact Resistance: 200mΩ max.
- Dielectric Strength: 600V AC for 1 min.
- Mechanical Life: 100,000
- Electrical Life: 50,000
|
|
Panel mount BCD coded units which slot together to produce a bank of switches. Each unit is engraved (white on black). Output is 8-4-2-1 weighting.Gold plated PCB tracks and connections. Cutout for one unit plus end caps 16 x 30mm. Allow further 8mm per u |
 |
S1795 ROHS
|
|
|
|
Protective hinged cover to prevent accidental operation of the switch. |
 |
S3226 ROHS
|
|
- Switch Type: SPST
- Contact Rating: 10A @ 250V AC
- LED: Red, 1.8V DC
- Panel Cutout: 27.6 x 13.8 mm
- Electrical Life: 20,000 Cycles
- Mechanical Life: 100,000 Cycles
- Contact Resistance: <50mR
- Insulation Resistance: >100MR
- Dielectric Strength: >1500V AC 1 Minute
|
|
Switch Type: SPST
Contact Rating: 10A @ 250V AC
LED (S 3226): Red, 1.8V DC
Panel Cutout: 27.6 x 13.8 mm
Electrical Life: 20,000 Cycles
Mechanical Life: 100,000 Cycles
Contact Resistance: <50mR
Insulation Resistance: >100MR
Dielectric Strength: >1500V AC 1 Minute |
 |
S4128C ROHS
|
|
- Max switching voltage: 250V AC, 220V DC
- Max switching current: 0.5A AC, 2A DC
- Max VA (Watts): 62VA (30W)
- Contact material: Silver Palladium
- Coil resistance: 178Ω
- Max coil power: 200mw
- Insulation resistance: >1000MΩ@ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 1000V AC between coil & contact
- Electrical life: 200,000 operations 1A 24V
- Mechanical life: 10 million operations
- Dimensions: 14W x 9L x 5H mm
|
|
Fully sealed construction |
 |
S2020 ROHS
|
|
- Switch Type: DPDT
- Contact Rating: 500mA @ 50V DC
- Contact Resistance: < 30mΩ
- Mounting Hole Centres: 19mm
|
|
With aluminium actuator.
Mounting screws to suit (S 2014) |
 |
S2033 ROHS
|
|
- Switch Type: PCB Mount 4P3T
- Contact Rating: 300mA @ 50V DC
- Contact Resistance: < 30mΩ
- Mounting Hole Centres: 16.5mm
|
|
With plastic actuator
Mounting screws to suit (S 2024) |
 |
S5520 ROHS
|
|
- UL, CSA, VDE approved
- RoHS approved
- Rating at 250V AC or 50V DC
- Black plastic actuator button
- Supplied with all mounting hardware
- Quick connect 6.3mm terminals
- Includes ID plate
|
|
All specifications at 25°C
Hold Current: 100% load indefinitely
Trip Current: Within 1 hr @ 145% load
Within 1 minute @ 200% load
Max. Voltage: 250V AC or 50V DC
Panel Cutout: Single hole mount 12mm Ø
Dimensions: 36H x 31L x 15W mm |
 |
S3225 ROHS
|
|
- Switch type: SPST
- Contact rating:10A @ 250V AC
- Panel cutout:27.6 x 13.8 mm
- Electrical life:20,000 cycles
- Mechanical life:100,000 cycles
- Contact resistance:<50mΩ
- Insulation resistance:>100MΩ
- Dielectric strength:>1500V AC 1 minute
|
|
Switch type:SPST
Contact rating:10A @ 250V AC
LED (S 3226):Red, 1.8V DC
Panel cutout:27.6 x 13.8 mm
Electrical life:20,000 cycles
Mechanical life:100,000 cycles
Contact resistance:<50mΩ
Insulation resistance:>100MΩ
Dielectric strength:>1500V AC 1 minute |
 |
S1332 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S4313 ROHS
|
|
- Max Switching Voltage: 300V AC, 30V DC
- Max Switching Current: 10A (total)
- Max VA (Watts): 280VA (280W)
- Contact Material: Silver Cadmium Oxide
- Coil Resistance: 640Ω
- Max Coil Power: 900mW
- Insulation Resistance: >1000MΩ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1500V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 20 million operations
|
|
Features Inbuilt LED indicator |
 |
S3050 ROHS
|
|
- Rating: 50V DC 100mA continuous, 24V DC 25mA switching
- Contact Resistance: 30m Ohm max. initially @ 100mA
- 100m Ohm max. after life test
- Insulation Resistance: 1000M Ohm min.
- Operation Life: Average 10,000 min.
- Capacitance: 5pF max. between adjacent terminals
- Dielectric Breakdown Voltage: 500V DC min.
- Operation Force: 500g max
- Case, Cover & Actuators: UL94-VO, PBT plus glass fibre
- Terminals: Gold plated phosphor bronze
|
|
Gold plated contacts and pins. Durable self wiping contacts. |
 |
S1340 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S4260A ROHS
|
|
- Max Switching Voltage AC: 440V
- Max Switching Voltage DC: 125V
- Max Switching Current AC: 12A
- Max Switching Current DC: 12A
- Max Switching Power AC: 600VA
- Max Switching Power DC: 480W
- Contact Material: Silver alloy
- Coil Resistance (12V): 351Ω
- Max Coil Power: 400mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 29W x 12.7L x 15.7H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S2614 ROHS
|
|
- Pole 1 makes to:
- Pos. 1 - 8, 1
- Pos. 2 - 1, 3
- Pole 2 makes to:
- Pos. 1 - 4, 5
- Pos. 2 - 5, 7
|
|
Panel hole 19mm, length 27.5mm from rear of front shroud, 33.6mm overall depth, 61mm depth with key inserted, including terminals. Overall diameter 22mm. Two keys supplied with each switch.
Rated 2A @ 250V AC.
|
 |
S5144 |
|
|
|
Adjustable Pin Switch (from 11.5 to 29mm, 8mm travel), similar to car courtesy light switches. Suits car alarms (for boot and bonnet) etc.
Mounting hole 7.5mm. |
 |
S4445 |
|
- LED indicator
- Dual changeover contacts
|
|
The S 4445 is a handy 5 way "snap off" strip board fitted with 5x 24V (S4138) relays. Two sets of changeover contacts are provided. An on board LED illuminates when the relay is activated.
For 5V operation use S 4441 board.
For 12V operation use |
 |
S3239 |
|
|
|
This membrane cover works to prevent dust and water landing on and affecting the switch. |
 |
S5573 |
|
- Type: Automatic reset
- Terminals: Two #10 - 32 UNF stud.
- Rating: 40A @ 12/24V DC.
- Operating temperature: -23°C to 65°C
- Application: Battery chargers, vehicles.
- Test compliance: SAE standard J553 (type 1)
|
|
Single pole stud type 40A DC circuit breaker with surface mounting tabs. Ideal for use in vehicles. Auto reset. Current ratings at 12V/24V DC. Meets SAE J553 standard (Type 1). M10 x 32mm stud connection. Includes hardware. |
 |
S4100A |
|
- Max Switching Voltage: 100V DC
- Max Switching Current: 1A DC
- Max VA (Watts): 10VA
- Contact Material: Rhodium Alloy
- Coil Resistance: 500Ω
- Max Coil power: 500mw
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 150V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 10 million operations
- Mechanical Life: 10 million operations
- Dimensions:˜20W x 8L x 6H mm
|
|
Fully sealed construction (immersion cleanable).
DIL pitch terminals. |
 |
S1365 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S3229 ROHS
|
|
- Switch Type: SPST
- Contact Rating: 10A @ 250V AC
- Panel Cutout: 23 x 11.5 mm
- Panel Thickness: 0.75 - 1.25mm max.
- Electrical Life: 10,000 cycles
- Mechanical Life: 100,000 cycles
- Contact Resistance: <20mΩ
- Neon: Red, 240V AC
- Insulation Resistance: >100MΩ
- Dielectric Strength: >1500V AC 1 minute
|
|
Switch type: SPST
Contact rating: 10A @ 250V AC
Panel cutout: 23 x 11.5 mm
Panel thickness: 0.75 - 1.25mm max.
Electrical life: 10,000 cycles
Mechanical life: 100,000 cycles
Contact resistance: <20mΩ
Neon: Red, 240V AC
Insulation resistance: |
 |
S4270A ROHS
|
|
- Max Switching Voltage: 440V AC, 125V DC
- Max Switching Current: 8A (total)
- Max VA (Watts): 2800VA (240W)
- Contact Material: Silver Alloy
- Coil Resistance: 351Ω
- Max Coil Power: 400mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: ˜29W x 12.7L x 15.7H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S5881 ROHS
|
|
- Max. Voltage: 42V DC
- Rating: 150A DC
- Interrupt Rating: 3000A @ 30V DC
- IP Rating: IP67
- Operating Temperature: -32°C to 92°C
- Testing: SAE J1625, SAE1171 (ignition protected)
- Material: UL94V-0
- RoHS approved.
- External Dimensions: 70 x 50 x 35mm
|
|
High current weatherproof circuit breakers with manual reset switch. M6 terminal bolts. |
 |
S4114 ROHS
|
|
- Max Switching Voltage: 125V AC, 60V DC
- Max Switching Current: 1A DC
- Max VA (Watts): 62.5VA (30W)
- Contact Material: Gold Plated Silver
- Coil Resistance: 3840Ω
- Max Coil Power: 150mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 400V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 5 million operations
- Dimensions: ˜12.5W x 7.5L x 10H mm
|
|
Max voltage: 125V AC, 60V DC
Max current: 1A DC
Max VA (Watts): 62.5VA (30W)
Contact material: Gold Plated Silver
Coil resistance: 3840&Omega
Max coil power: 150mw
Insulation resistance: >1000M&Omega @ 500V DC
Dielectric strength (for 1 min):
400V AC between open contacts
1000V AC between coil & contact
Electrical life: 100,00 |
