|
Description |
Downloads |
Specs |
Ordering |
|
 |
S1724 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
 |
S1355 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S4272A ROHS
|
|
- Max Switching Voltage: 440V AC, 125V DC
- Max Switching Current: 8A (total)
- Max VA (Watts): 2800VA (240W)
- Contact Material: Silver Alloy
- Coil Resistance: 1440Ω
- Max Coil Power: 400mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: ˜29W x 12.7L x 15.7H mm
|
|
Non-sealed type, suitable for flow soldering |
 |
S1513 |
|
- Switch type: 4PDT
- Contact rating: 200mA @ 250V AC
- Contact resistance: <10mΩ
|
|
Locking push on, push off actuation. |
 |
S3000A ROHS
|
|
|
|
Temperature range: -10C to +60°C Non switching rating: 50V DC @ 100mA Switching rating: 5V DC @ 100mA Contact resistance (Rc): 100m max. Insulation resistance: 100M min @ 250VAC Voltage proof: 250V AC for 1 min. Mech life: (Rc < 150m |
 |
S5585 ROHS
|
|
- Hold Current: 100% load indefinitely
- Trip Current: Within 1 hr @ 135% load
- Within 1 minute @ 200% load
- Neon Voltage: 250V AC
- Max. Voltage: 250V AC or 50V DC
- Panel Cutout: 13.35mm x 28.5mm
- Dimensions: 33H x 32L x 15.5W mm
- All specifications at 25°C.
|
|
Combination illuminated switch and circuit breaker all in one compact package. |
 |
S1734 ROHS
|
|
- Colour: Orange
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
 |
S5621 ROHS
|
|
|
|
Current Trip Rating: 1.5 Amp
All specifications at 25°C
Hold Current: 100% load indefinitely
Trip Current: Within 1 hr @ 175% load
Within 1 minute @ 200% load
Max. Voltage: 120V AC or 12V DC
Dimensions: 20.6H x 10.5L x 8.7W mm |
 |
S5887 NEW
|
|
- Max. Voltage: 42V DC
- Interrupt Rating: 3000A @ 30V DC
- Operating Temperature: -32°C to 82°C
- Testing: SAE J1625, SAE J1171 (ignition protected)
- Material: UL94V-0
- IP Rating: IP67
- RoHS approved
- UL approved 50A @ 32V DC
- External Dimensions: 70 x 50 x 35mm
|
|
This 70A high current surface mount circuit breaker is ideal for use in 12V or 24V DC power systems. |
 |
S1736 ROHS
|
|
- Colour: White
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. |
 |
S3055 ROHS
|
|
- Rating: 50V DC 100mA continuous, 24V DC 25mA switching
- Contact Resistance: 30m Ohm max. initially @ 100mA
- 100m Ohm max. after life test
- Insulation Resistance: 1000M Ohm min.
- Operation Life: Average 10,000 min.
- Capacitance: 5pF max. between adjacent terminals
- Dielectric Breakdown Voltage: 500V DC min.
- Operation Force: 500g max
- Case, Cover & Actuators: UL94-VO, PBT plus glass fibre
- Terminals: Gold plated phosphor bronze
|
|
Gold plated contacts and pins. Durable self wiping contacts. |
 |
S1511 ROHS
|
|
- Switch type: DPDT
- Contact rating: 200mA @ 250V AC
- Contact resistance: <10mO
|
|
Locking push on, push off actuation. With Mounting Bar |
 |
S1726 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
 |
S1785A ROHS
|
|
|
|
24V DC LED to suit S 1700A Series Switch |
 |
S3084 ROHS
|
|
- Rating: 50V DC 100mA continuous, 24V DC 25mA switching
- Contact resistance: 50mž max. initially @ 100mA
- 100mž max. after life test
- Insulation resistance: 100Mž min.
- Operation life: 2000 operations per switch
- Capacitance: 5pF max. between adjacent terminals
- Dielectric breakdown voltage: 500V DC min.
- Operation force: 1000gf max
- Terminals: Gold plated
|
|
Gold plated contacts and pins. Durable self wiping
contacts. |
|
S1706 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
 |
S1700A ROHS
|
|
- Switch Type: Momentary
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical Life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
 |
S1674 |
|
- SPDT Momentary Action - Blue
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Blue
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC |
 |
S2554 |
|
- Key removable either position
|
COMING SOONThis item is arriving soon. |
This key switch and cam lock are available to OEM customers with a requirement for 003 key specification. This
model is only available in a minimum quantity of 25 pieces. Contact our parent company Altronic Distributors for competitive pricing on this it |
 |
S1395 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max.
- Initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 MΩ min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1732 ROHS
|
|
- Colour: Green
- Type: 4PST
- Action: Alternate
- Switch System: 2 NO & 2 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
 |
S5557 ROHS
|
|
- Hold Current: 100% load indefinitely
- Trip Current: Within 1 hr @ 135% load
- Within 1 minute @ 200% load
- Max. voltage: 250V AC or 32V DC
- Dimensions: 52L x 13.5H x 15.5W
- All specifications at 25°C.
|
|
Snap-in fitting with coloured button. |
 |
S1132A ROHS
|
|
- Colour: Green
- Type: SPST
- Action: Momentary
- Contact Rating: 50mA @ 12V DC
- Contact Resistance: < 100mO
- LED Voltage : 5V DC Max
- LED Forward Current: 7mA Typical
|
|
SPST momentary green LED PCB mount tactile switch. |
 |
S4138 ROHS
|
|
- Max Switching Voltage: 250V AC, 220V DC
- Max Switching Current: 0.5A AC, 2A DC (1A DC for UL approved applications)
- Max VA (Watts): 62VA (30W)
- Contact Material: Silver Palladium
- Coil Resistance: 2880Ω
- Max Coil Power: 200mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 200,000 operations 1A 24V
- Mechanical Life: 10 million operations
- Dimensions: 14W x 9L x 5H mm
|
|
Fully sealed construction
|
 |
S1098 ROHS
|
|
|
|
Switch type: SPST momentary
Contact resistance: MΩ
Contact breaking capacity: 10mA/35VDC
Actator diameter: 9mm
Insulation resistance: 100000MΩ
Dielectric strength: 500V
Inter-terminal capacity: 1pF
Life (nominal current & voltage): 500000 cycle
Temperature range: -20 |
