|
Description |
Downloads |
Specs |
Ordering |
|
 |
S3245A ROHS
|
|
- Switch Type: DPDT
- Contact Rating: 15A @ 250V AC
- Panel Cutout: 28 x 22mm
- Electrical Life: 10,000 Cycles
- Mechanical Life: 30,000 Cycles
- Contact Resistance: <20mΩ
- Insulation Resistance: >1000MΩ
- Dielectric Strength: >1500V 1 Minute
|
|
Heavy duty DPDT panel mount rocker switch with a 15A @ 250V AC contact rating for high current mains applications. Excellent mechanical and electrical life specifications. |
 |
S4402A ROHS
|
|
- Max switching voltage: 380V AC, 42V DC
- Max switching current: 10A
- Max VA (Watts): 1250VA (280W)
- Contact material: Silver Cadmium Oxide
- Coil resistance: 240Ω
- Max coil power: 600mw
- Insulation resistance: >100MΩ @ 500V DC
- Dielectric strength (for 1 min):
- 500V AC between open contacts
- 500V AC between coil & contact
- Electrical life: 100,000 operations
- Mechanical life: 10 million operations
- Dimensions:˜15W x 12L x 12Hmm
|
|
Non-Sealed type, suitable for flow soldering |
 |
S3260 ROHS
|
|
- Switch Type: SPDT Momentary
- Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
- Contact Resistance: <15mR
- Actuator Length: 27mm
- Connection: 4.8mm spade
|
|
Switch Type: SPDT Momentary
Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
Contact Resistance: <15mR
Actuator Length: 27mm |
 |
S3262 ROHS
|
|
- Switch Type: SPDT Momentary
- Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
- Contact Resistance: <15mR
- Actuator Length: 51mm
- Connection: 4.8mm spade
|
|
Switch Type: SPDT Momentary
Contact Rating: 250VAC 5A for Resistive load, 250VAC 4A for Inductive load
Contact Resistance: <15mR
Actuator Length: 51mm |
 |
S1174 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm |
|
S1175 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm |
|
S1177 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm |
 |
S1050 |
|
- Contact Rating: 3A @ 250V AC
- Mounting Hole Diameter: 12mm
|
|
With On-Off plate and metal actuator. |
 |
S1320 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1050A NEW
|
|
- Contact Rating: 5A @ 125V AC, 3A @ 250V AC
- Contact Rating: 50mΩ max
- Insulation Rating: 500V DC 1000MΩ min
- Dielectric Strength: 1 minute 1500V AC
- Operating Temperature: -25°C to 85°C
- Mounting Hole Diameter: 12.2mm
|
|
DPDT 3A Toggle Switch. With On-Off plate and metal actuator. |
 |
S1325 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1495 ROHS
|
|
- Contact Rating: 20mA @ 20V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S3226 ROHS
|
|
- Switch Type: SPST
- Contact Rating: 10A @ 250V AC
- LED: Red, 1.8V DC
- Panel Cutout: 27.6 x 13.8 mm
- Electrical Life: 20,000 Cycles
- Mechanical Life: 100,000 Cycles
- Contact Resistance: <50mR
- Insulation Resistance: >100MR
- Dielectric Strength: >1500V AC 1 Minute
|
|
Switch Type: SPST
Contact Rating: 10A @ 250V AC
LED (S 3226): Red, 1.8V DC
Panel Cutout: 27.6 x 13.8 mm
Electrical Life: 20,000 Cycles
Mechanical Life: 100,000 Cycles
Contact Resistance: <50mR
Insulation Resistance: >100MR
Dielectric Strength: >1500V AC 1 Minute |
|
S1335 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S3190 ROHS
|
|
- Switch Type: SPST Alternate
- Indicator: Red LED
- Contact Rating: 6A @ 250V AC
- Panel Cutout: 20mmØ
- Panel Thickness: 6mm Max.
- LED Indicator Power Requirements: 1.85V dc, 10mA.
|
|
Switch Type: SPST Alternate rocker switch
Indicator: Red LED
Contact Rating: 6A @ 250V AC
Panel Cutout: 20mmØ
Panel Thickness: 6mm Max.
LED indicator Power Requirements: 1.85V dc, 10mA.
NOTE: The LED Terminals are the two smaller terminals. |
 |
S3247 ROHS
|
|
- Switch Type: SPST
- Contact Rating: 25A @ 12V DC
- Electrical Life: 10,000 cycles
- Mechanical Life: 100,000 cycles
- Panel Cutout: 26.5 x 11.5 mm
- Panel Thickness: 0.75 - 2mm
- LED: Red, 12V DC
- Contact Resistance: 50mΩ max.
- Insulation Resistance: >100M ohm
- Dielectric Strength: >1500V AC 1 minute
|
|
Designed for use in low voltage applications, this LED illuminated panel mount rocker switch is an SPST alternate type. |
 |
S1332 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1333 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
MOMENTARY ON BOTH SIDES. CENTRE OFF
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the S |
 |
S4140B ROHS
|
|
- Max Switching Voltage: 220V AC, 60V DC
- Max Switching Current: 3A
- Max VA (Watts): 625VA (90W)
- Contact Material: Silver Nickel
- Coil Resistance: 400Ω
- Max Coil Power: 360mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 500V AC between open contacts
- 500V AC between coil & contact
- Electrical Life:100,000 operations 3A 24V
- Mechanical Life: 10 million operations
- Dimensions:˜16W x 10L x 11H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S4142B ROHS
|
|
- Max Switching Voltage: 220V AC, 60V DC
- Max Switching Current: 3A
- Max VA (Watts): 625VA (90W)
- Contact Material: Silver Nickel
- Coil Resistance: 1600Ω
- Max Coil Power: 360mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 500V AC between open contacts
- 500V AC between coil & contact
- Electrical Life:100,000 operations 3A 24V
- Mechanical Life: 10 million operations
- Dimensions:˜16W x 10L x 11H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S5145 |
|
|
|
Similar to car courtesy light switches. Suits car alarms (for boot and bonnet) etc. Measurement listed is height above mounting surface.
Mounting hole 7.5mm. |
 |
S3033 ROHS
|
|
- Shaft Ø: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round
- Contact Timing: Break before make
- Contact Rating: 125V AC/DC @350mA
- Termination: Solder Tag Terminals
|
|
Shaft Ø: 6.35mm
Shaft Length: 30mm
Shaft Shape: Round
Contact Timing: Break before make
Contact Rating: 125V AC/DC @350mA
Termination: Solder Tag Terminals |
|
S3034 ROHS
|
|
- Shaft Ø: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round
- Contact Timing: Break before make
- Contact Rating: 125V AC/DC @350mA
- Termination: Solder Tag Terminals
|
|
Shaft Ø: 6.35mm
Shaft Length: 30mm
Shaft Shape: Round
Contact Timing: Break before make
Contact Rating: 125V AC/DC @350mA
Termination: Solder Tag Terminals |
|
S3035 ROHS
|
|
- Shaft Ø: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round
- Contact Timing: Break before make
- Contact Rating: 125V AC/DC @350mA
- Termination: Solder Tag Terminals
|
|
Shaft Ø: 6.35mm
Shaft Length: 30mm
Shaft Shape: Round
Contact Timing: Break before make
Contact Rating: 125V AC/DC @350mA
Termination: Solder Tag Terminals |
 |
S5578 NEW
|
|
- Operating Temperature: -40°C to +85°C
- Material: TPE
|
|
These circuit breaker covers, constructed of TPE, are suited to 12V stud type circuit breakers. |
