|
Description |
Downloads |
Specs |
Ordering |
|
 |
S1145 |
|
- Axis Potentiometers: 2 x 10kΩ
- Switch type: SPST momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance: < 100mΩ
- Insulation resistance: >100MΩ
- Life: 100,000 cycles
- Push down centre of joystick for tactile switch.
|
|
X Y Axis analog type potentiometer joystick control with a centre pushbutton activate switch. |
 |
S1370 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1250 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1270 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature rocker switches are pin for pin compatible with several other leading brands but at a fraction of the cost. DPDT solder tail mini rocker switch. |
 |
S4202B ROHS
|
|
- Max Switching Voltage: 380V AC, 110V DC
- Max Switching Current: 10A
- Max VA (Watts): 2400VA (336W)
- Contact Material: Silver Nickel
- Coil Resistance: 400Ω
- Max Coil Power: 360mw
- Insulation Resistance: >500MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 2500V AC between coil & contact
- Electrical Life: 100,000 operations 5A 24V
- Mechanical Life: 10 million operations
- Dimensions: 22W x 17L x 15H mm
|
|
Non-Sealed type, suitable for flow soldering |
 |
S4204B ROHS
|
|
- Max Switching Voltage: 380V AC, 110V DC
- Max Switching Current: 10A
- Max VA (Watts): 2400VA (336W)
- Contact Material: Silver Nickel
- Coil Resistance: 1600Ω
- Max Coil Power: 360mw
- Insulation Resistance: >500MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 2500V AC between coil & contact
- Electrical Life: 100,000 operations 5A 24V
- Mechanical Life: 10 million operations
- Dimensions: 22W x 17L x 15H mm
|
|
Non-Sealed type, suitable for flow soldering |
 |
S1797 ROHS
|
|
|
|
Includes handy globe remover and fixing nut spanner. |
 |
S1698 ROHS
|
|
|
|
Suits S1670-1673 only. |
 |
S1086 ROHS
|
|
- Colour: Red
- Type: SPST
- Action: Momentary
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
Switch type:Solder Tail SPDT
Contact rating:1.5A @ 250V AC
Contact resistance:< 50m Ohm |
|
S1087 ROHS
|
|
- Colour: Red
- Type: SPST
- Action: Alternate
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
SPST momentary LED red solder tail pushbutton switch. |
 |
S1088 ROHS
|
|
- Colour: Amber
- Type: SPST
- Action: Alternate
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
SPST alternate LED amber solder tail pushbutton switch. |
 |
S1089 ROHS
|
|
- Colour: Green
- Type: SPST
- Action: Alternate
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
SPST alternate LED green solder tail pushbutton switch. |
|
S1085 |
|
- Colour: Green
- Type: SPST
- Action: Momentary
- Contact Rating: 1.5A @ 250V AC
- LED (typical voltage): 2V DC, 20mA
- Contact Resistance: < 50mΩ
- Insulation Resistance: >100MΩ
- Panel Thickness: 0.75 - 3mm
- Dielectric Strength: >1500V AC, 1 minute
|
|
Switch type:Solder Tail SPDT
Contact rating:1.5A @ 250V AC
Contact resistance:< 50m Ohm |
 |
S3266 |
|
- Switch Type: SPDT Momentary
- Contact Rating: 3A @ 250VAC resistive load
- Contact Resistance: <15mR
- Actuator Length: None
|
|
A handy miniature limit microswitch with 37mm actuator. This size is commonly found in joystick designs in industrial and amusement equipment. Ideal for replacement or new mechatronic designs. |
|
S1371 |
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S4100A |
|
- Max Switching Voltage: 100V DC
- Max Switching Current: 1A DC
- Max VA (Watts): 10VA
- Contact Material: Rhodium Alloy
- Coil Resistance: 500Ω
- Max Coil power: 500mw
- Insulation resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 150V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 10 million operations
- Mechanical Life: 10 million operations
- Dimensions:˜20W x 8L x 6H mm
|
|
Fully sealed construction (immersion cleanable).
DIL pitch terminals. |
 |
S4101A |
|
- Max switching voltage: 100V DC
- Max switching current: 1A DC
- Max VA (Watts): 10VA
- Contact material: Rhodium Alloy
- Coil resistance: 1050Ω
- Max coil power: 500mw
- Insulation resistance: >1000MΩ@ 500V DC
- Dielectric strength (for 1 min):
- 150V AC between open contacts
- 1000V AC between coil & contact
- Electrical life: 10 million operations
- Mechanical life: 10 million operations
- Dimensions:˜20W x 8L x 6H mm
|
|
Fully sealed construction (immersion cleanable).
DIL pitch terminals. |
 |
S1498 ROHS
|
|
- Contact Rating: 20mA @ 20V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S3021 ROHS
|
|
- Shaft Diameter: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round with knob location flat
- Contact Timing: Break before make
- Contact Rating: 150mA @ 250V AC
- Contact Type: Silver Plated
- Max. Working Voltage: 300V
- Termination: 1.2 mm PCB Pins
|
|
User Selectable Configuration
Each switch includes a toothed washer with a mating series of sockets in the switch housing to enable the switch to be configured to your specific requirement. |
|
S3022 ROHS
|
|
- Shaft Diameter: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round with knob location flat
- Contact Timing: Break before make
- Contact Rating: 150mA @ 250V AC
- Contact Type: Silver Plated
- Max. Working Voltage: 300V
- Termination: 1.2 mm PCB Pins
|
|
User Selectable Configuration
Each switch includes a toothed washer with a mating series of sockets in the switch housing to enable the switch to be configured to your specific requirement. |
|
S3024 ROHS
|
|
- Shaft Diameter: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round with knob location flat
- Contact Timing: Break before make
- Contact Rating: 150mA @ 250V AC
- Contact Type: Silver Plated
- Max. Working Voltage: 300V
- Termination: 1.2 mm PCB Pins
|
|
User Selectable Configuration
Each switch includes a toothed washer with a mating series of sockets in the switch housing to enable the switch to be configured to your specific requirement. |
|
S3025 ROHS
|
|
- Shaft Diameter: 6.35mm
- Shaft Length: 30mm
- Shaft Shape: Round with knob location flat
- Contact Timing: Break before make
- Contact Rating: 150mA @ 250V AC
- Contact Type: Silver Plated
- Max. Working Voltage: 300V
- Termination: 1.2 mm PCB Pins
|
|
User Selectable Configuration
Each switch includes a toothed washer with a mating series of sockets in the switch housing to enable the switch to be configured to your specific requirement. |
 |
S3228 ROHS
|
|
- Switch Type: SPST
- Contact Rating: 10A @ 250V AC
- Neon: Red, 240VAC
- Panel Cutout: 27.6 x 13.8 mm
- Electrical Life: 20,000 Cycles
- Mechanical Life: 100,000 Cycles
- Contact Resistance: <50mRΩ
- Insulation Resistance: >100MRΩ
- Dielectric Strength: >1500V AC 1 Minute
|
|
Switch Type: SPST
Contact Rating: 10A @ 250V AC
Neon: Red, 240VAC
Panel Cutout: 27.6 x 13.8 mm
Electrical Life: 20,000 Cycles
Mechanical Life: 100,000 Cycles
Contact Resistance: <50mR
Insulation Resistance: >100MR
Dielectric Strength: >1500V AC 1 Minute |
 |
S1360 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1405 ROHS
|
|
|
|
Momentary, 1.5A rated @ 250V AC |
