|
Description |
Downloads |
Specs |
Ordering |
|
 |
S1081 ROHS
|
|
- Contact rating : 3A @ 250V AC
- Mounting Hole Dia. : 12mm
|
|
SPST Momentary with a black cap. |
 |
S5571 ROHS
|
|
- Type: Automatic reset
- Terminals: Two #10 - 32 UNF stud.
- Rating: 30A @ 12/24V DC.
- Operating temperature: -23°C to 65°C
- Application: Battery chargers, vehicles.
- Test compliance: SAE standard J553 (type 1)
|
|
Single pole stud type 30A DC circuit breaker with surface mounting tabs. Ideal for use in vehicles. Auto reset. Current ratings at 12V/24V DC. Meets SAE J553 standard (Type 1). M10 x 32mm stud connection. Includes hardware. |
 |
S4114 ROHS
|
|
- Max Switching Voltage: 125V AC, 60V DC
- Max Switching Current: 1A DC
- Max VA (Watts): 62.5VA (30W)
- Contact Material: Gold Plated Silver
- Coil Resistance: 3840Ω
- Max Coil Power: 150mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 400V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 5 million operations
- Dimensions: ˜12.5W x 7.5L x 10H mm
|
|
Max voltage: 125V AC, 60V DC
Max current: 1A DC
Max VA (Watts): 62.5VA (30W)
Contact material: Gold Plated Silver
Coil resistance: 3840&Omega
Max coil power: 150mw
Insulation resistance: >1000M&Omega @ 500V DC
Dielectric strength (for 1 min):
400V AC between open contacts
1000V AC between coil & contact
Electrical life: 100,00 |
 |
S2070 ROHS
|
|
- Type: PCB Mount SPDT
- Contact Rating: 2A @ 240V AC
- Contact Resistance: < 10mΩ
|
|
With plastic actuator. |
 |
S4132B ROHS
|
|
- Max Switching Voltage: 250V AC, 220V DC
- Max Switching Current: 0.5A AC, 2A DC (1A DC for UL approved applications).
- Max VA (Watts): 62VA (30W)
- Contact Material: Silver Palladium
- Coil Resistance: 2880Ω
- Max Coil Power: 200mw
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1000V AC between coil & contact
- Electrical Life: 200,000 operations 1A 24V
- Mechanical Life: 10 million operations
- Dimensions: 14W x 9L x 5H mm
|
|
Fully sealed construction |
 |
S4244 |
|
- Max AC Rating: 0.5A @ 125V
- Max DC Rating: 2A @ 30V
- Max Switching Power AC: 62VA
- Max Switching Power DC: 60W
- Contact Material: Silver palladium + Gold plated
- Coil Resistance (12V): 1028Ω
- Max Coil Power: 200mW
- Insulation Resistance: >1000MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 1600V AC between coil & contact
- Life: 100,000 electrical 0.5A 125V, 10 million mechanical
- Dimensions: 10W x 6.5L x 5.4H mm
|
|
Max AC rating: 0.5A @ 125V
Max DC rating: 2A @ 30V
Max switching power AC: 62VA
Max switching power DC: 60W |
 |
S1127 |
|
- Contact rating: 50mA @ 12V DC
- Contact resistance: < 100mΩ
- Insulation resistance: >100MΩ
- Life: 100,000 cycles
|
|
0.8mm Actuator
0.25mm Travel |
 |
S5590 ROHS
|
|
- Hold Current: 100% load indefinitely
- Trip Current: Within 1 hr @ 135% load
- Within 1 minute @ 200% load
- Neon Voltage: 250V AC
- Max. Voltage: 250V AC or 50V DC
- Panel Cutout: 13.35mm x 28.5mm
- Dimensions: 33H x 32L x 15.5W mm
- All specifications at 25°C.
|
|
Combination illuminated switch and circuit breaker all in one compact package. |
 |
S1084A |
|
- Contact Resistance: 50m Ohm max
- Insulation Resistance: DC 500V 100M Ohm min
- Dielectric Strength: AC 1000V/1 minute
- Rating: 1.5A 250V
- UL Approval: 1054
- Panel cutout: Ø12.7mm
|
|
Low profile black push button switch with solder tail connection. |
 |
S4202B ROHS
|
|
- Max Switching Voltage: 380V AC, 110V DC
- Max Switching Current: 10A
- Max VA (Watts): 2400VA (336W)
- Contact Material: Silver Nickel
- Coil Resistance: 400Ω
- Max Coil Power: 360mw
- Insulation Resistance: >500MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 2500V AC between coil & contact
- Electrical Life: 100,000 operations 5A 24V
- Mechanical Life: 10 million operations
- Dimensions: 22W x 17L x 15H mm
|
|
Non-Sealed type, suitable for flow soldering |
 |
S5530 ROHS
|
|
- UL, CSA, VDE approved
- RoHS approved
- Rating at 250V AC or 50V DC
- Black plastic actuator button
- Supplied with all mounting hardware
- Quick connect 6.3mm terminals
- Includes ID plate
|
|
All specifications at 25°C
Hold Current: 100% load indefinitely
Trip Current: Within 1 hr @ 145% load
Within 1 minute @ 200% load
Max. Voltage: 250V AC or 50V DC
Panel Cutout: Single hole mount 12mm Ø
Dimensions: 36H x 31L x 15W mm |
 |
S1083 |
|
- Contact rating : 3A @ 125V AC
- Mounting Hole Dia. : 12.5mm max. Panel thickness: 5.0mm
- Contact Resistance: 50mΩ Max.
- Insulation resistance: 500V DC 100MΩ/minute
- Dielectric Strength: 1500V AC 1 minute
- Electrical Life: 20,000 make-and-break cycles at full load.
|
|
SPST Alternate action switch with a black cap. |
 |
SA4198 |
|
- 16A SPST 12V PCB Relay. Great for high current applications, experiments, new designs & projects.
|
|
16A SPST 12V PCB Relay. Great for high current applications, experiments, new designs & projects. |
 |
S1380 |
|
- Contact Resistance: 10mΩ max
- Insulation Resistance: 1,000M Ω min
- Dielectric Strength: 1500V a.c. 50/60Hz
- Soldering Temperature: 260°C
- Duration of Solder Immersion: 5 ± 1
- Resistance Low Temperature: -30 ± 3°C
- Resistance High Temperature: 85 ± 3°C
- Resistance Humidity Temperature: 40 ± 2°C
- Relative Humidity: 90-95%
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. |
 |
S1375 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1700 ROHS
|
|
- Colour: Red
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove |
|
S5535 ROHS
|
|
- UL, CSA, VDE approved
- RoHS approved
- Rating at 250V AC or 50V DC
- Black plastic actuator button
- Supplied with all mounting hardware
- Quick connect 6.3mm terminals
- Includes ID plate
|
|
All specifications at 25°C
Hold Current: 100% load indefinitely
Trip Current: Within 1 hr @ 145% load
Within 1 minute @ 200% load
Max. Voltage: 250V AC or 50V DC
Panel Cutout: Single hole mount 12mm Ø
Dimensions: 36H x 31L x 15W mm |
 |
S1320 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1720A ROHS
|
|
- Switch Type: Alternate
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Alternate type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
 |
SX2040 |
|
- Dimensions in mm.
|
|
Contact rating: 300mA @ 50V d.c.
Contact resistance: <30m Ohm
Mounting hole centres: 23mm
Actuator: plastic |
 |
S4199 ROHS
|
|
- Max Switching Voltage: 250V AC, 110V DC
- Max Switching Current: 16A
- Max VA (Watts): 1800VA (450W)
- Contact Material: Silver Selenium Dioxide
- Coil Resistance: 820Ω
- Max Coil Power: 720mw
- Insulation Resistance: >100MΩ @ 500V DC
- Dielectric Strength (for 1 min):
- 1000V AC between open contacts
- 5000V AC between coil & contact
- Electrical Life: 100,000 operations
- Mechanical Life: 10 million operations
- Dimensions: 13W x 29L x 21H mm
|
|
Fully sealed construction (immersion cleanable). |
 |
S2654 |
|
- Pos.1 - 8, 1
- Pos.2 - 1, 2
- Pos.3 - 2, 3
- Pos.4 - 3, 4
|
|
Key removable in all positions. Non-spring return (ie. Alternate action).
Panel hole 19mm, length 27.5mm from rear of front shroud, 33.6mm overall depth, 61mm depth with key inserted, including terminals. Overall diameter 22mm. Two keys supplied wit |
 |
S3218 ROHS
|
|
- Contact Rating: 6A @ 250V AC
- Neon Colour: Blue
- Neon Voltage: 240V AC
- Panel Cutout: 19.2 x 13mm
- Electrical Life: 10,000 Cycles
- Mechanical Life: 15,000 Cycles
- Contact Resistance: <20MΩ
- Insulation Resistance: >1000MΩ
- Dielectric Strength: >1500V 1 Minute
- >3000V Between Poles
|
|
Contact Rating: 6A @ 250V AC
Neon Colour: Blue
Neon Voltage: 240V AC
Panel Cutout: 19.2 x 13mm
Electrical Life: 10,000 Cycles
Mechanical Life: 15,000 Cycles
Contact Resistance: <20mΩ
Insulation Resistance: >1000MΩ
Dielectric Strength: >1500V 1 Minute
>3000V Between Poles |
 |
S1660 |
|
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min
- Electrical rating: 250V AC 5A
- LED: 12V (inbuilt resistor)
- Dielectric strength: 2kV AC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
|
|
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min
Electrical rating: 250V AC 5A
LED: 12V (inbuilt resistor)
|
 |
S1034 ROHS
|
|
|
|
To suit S1040/50/55 switches. |
