|
Description |
Downloads |
Specs |
Ordering |
|
 |
S1132A ROHS
|
|
- Colour: Green
- Type: SPST
- Action: Momentary
- Contact Rating: 50mA @ 12V DC
- Contact Resistance: < 100mO
- LED Voltage : 5V DC Max
- LED Forward Current: 7mA Typical
|
|
SPST momentary green LED PCB mount tactile switch. |
 |
S1135 ROHS
|
|
|
|
3.0mm Actuator |
 |
S1138 ROHS
|
|
|
|
Black cap to suit S1135 3.0mm Actuator. |
 |
S1145 |
|
- Axis Potentiometers: 2 x 10kΩ
- Switch type: SPST momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance: < 100mΩ
- Insulation resistance: >100MΩ
- Life: 100,000 cycles
- Push down centre of joystick for tactile switch.
|
|
X Y Axis analog type potentiometer joystick control with a centre pushbutton activate switch. |
 |
S1150A |
|
- Contact Form: DPDT
- Double Pole Double Throw
- Switch Function: ON-ON
- Ratings: 4A @ 125VAC, 2A @ 250VAC
- 6-pin solder lug
- Metal pushbutton switch (0.40"/10mm diameter)
- Electrical life: 20,000 make and break cycles
- Body color: Black
- Stomp switch, foot switch
|
|
Switch Type: DPDT Alternate
Contact Rating: 4A @ 250V AC
Contact Resistance: <80m&Omega
Mounting Hole Diam.: 12mm |
|
S1152A |
|
- Contact Form: DPDT
- Switch Function: ON-ON
- Maximum Current Rating (A): 4
- Type: Push Button
- Voltage Rating (AC): 250
- Actuator Type: Round Button
- Color: Black
- Color - Actuator/Cap: Chrome
- Number of Positions: 2
- Mounting Style: Panel
- Termination Style: Solderable Lug
- Number of Pins: 6
- Length (inch): 0.89
- Width (inch): 0.71
- Depth (inch): 0.75
- Height (inch): 0.46
- Actuator Length (inch): 0.4
- Lead Spacing A (inch): 0.35
- Lead Spacing B (inch): 0.35
- Features: Stomp Switch
- Maximum Contact Resistance: 50 mΩ
- Minimum Insulation Resistance: 100 MΩ
- Dielectric Strength: 1000 VAC
- Electrical Life: 20,000 operations
- Maximum Current Rating: 4
|
|
The sturdy little stomp switches that you find on guitar effects pedals.
Switch Type: DPDT momentary
Contact rating: 4A @ 250V AC
Contact resistance: <80m&Omega
Mounting hole diam.: 12mm |
 |
S1155 |
|
- Contact Rating: 4A @ 125VAC, 2A @ 250VAC
- Contact Resistance: <20mΩ
- Mounting Hole Diameter.: 12mm
|
|
Commonly used guitar effects pedals, stomp boxes etc. Push on, push off type.
Contact rating: 4A @ 125VAC, 2A @ 250VAC
Contact resistance: <20mΩ
Mounting hole diam.: 12mm |
 |
S1160A |
|
- Switch type: SPST
- Switching current: 1A DC
- Contact rating 1.5A @ 200VDC (Max)
- Contact resistance: 90mΩ
- Insulation resistance: >10^10 Ω
- Magnetic sensitivity: 20 - 50 AT
- Operate time: 0.35ms
- Flying lead length: 300mm
- Temperature Rating: -55 to 70 degrees C
|
|
New model with increased current handling. Fully immersible. Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. Can be used to control pumps or electric valves when liquid levels change. Includes a waterp |
 |
S1160C |
|
- Diameter of thread: ~15.5mm
- Switch type: SPST
- Switching current: 1.0A DC
- Contact rating: 1.0A @ 100VDC (Max)
- Contact resistance: 100mΩ
- Insulation resistance: >10^10 Ω
- Magnetic sensitivity: 20 - 50 AT
- Operate time: 0.35ms
- Flying lead length: 300mm
- Temperature Rating: -10 to 85°C
|
|
Fully immersible. Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. Can be used to control pumps or electric valves when liquid levels change. |
 |
S1163A |
|
- Switching current: 1A dc
- Contact rating: 1.75A @ 200V dc (max)
- Contact resistance: 90mΩ
- Insulation resistance (min): 106 MΩ
- Magnetic sensitivity: 20 to 50 AT
- Operate time: 0.35ms
- Flying lead length: 300mm
- Temperature rating: -55° to 70°C
|
|
New model with increased current handling. Fully immersible. Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. Can be used to control pumps or electric valves when liquid levels change. Includes a waterp |
 |
S1163B |
|
|
|
Ideal for water tank systems such as rain or waste water management, activating boat bilge pumps etc. |
 |
S1170 ROHS
|
|
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm
LED Rating
Current: 15mA
Voltage: 1.7-2.8V |
|
S1170A |
|
- Switch Type: SPST Momentary
- Contact Rating: 50mA @ 12V DC
- Contact Resistance:< 100m Ohm
- LED Rating
- Current: 15mA
- Voltage: 1.7-2.8V
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm
LED Rating
Current: 15mA
Voltage: 1.7-2.8V |
|
S1171 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
- LED Rating
- Current: 30mA
- Voltage: 1.7-2.8V
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm
LED Rating
Current: 30mA
Voltage: 1.7-2.8V |
|
S1171A |
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
- LED Rating
- Current: 30mA
- Voltage: 1.7-2.8V
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm
LED Rating
Current: 30mA
Voltage: 1.7-2.8V |
|
S1173 |
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
- LED Rating
- Current: 30mA
- Voltage:3.5-4.0V
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm
LED Rating
Current: 30mA
Voltage:3.5-4.0V |
|
S1173A |
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
- LED Rating
- Current: 30mA
- Voltage:3.5-4.0V
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm
LED Rating
Current: 30mA
Voltage:3.5-4.0V |
 |
S1174 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm |
|
S1175 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm |
|
S1177 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm |
 |
S1178 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm |
|
S1179 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm |
|
S1181 ROHS
|
|
- Switch type: SPST Momentary
- Contact rating: 50mA @ 12V DC
- Contact resistance:< 100m Ohm
|
|
Switch type: SPST Momentary
Contact rating: 50mA @ 12V DC
Contact resistance:< 100m Ohm |
 |
S1190 |
|
- Switch type: SPST momentary
- Max contact rating: 100mA @ 32V DC
- Contact resistance: <250mΩ
- Insulation resistance: >100MΩ
- Life: 50,000 cycles
- LED voltage: 1.8V
|
|
Switch type: SPST momentary
Max contact rating: 100mA @ 32V DC
Contact resistance: <250mΩ
Insulation resistance: >100MΩ
Life: 50,000 cycles
LED voltage: 1.8V |
|
S1191 |
|
- Switch Type: SPST momentary
- Max contact rating: 100mA @ 32V DC
- Contact resistance: <250mΩ
- Insulation resistance: >100MΩ
- Life: 50,000 cycles
- LED voltage: 3.5V
|
|
Switch type: SPST momentary
Max contact rating: 100mA @ 32V DC
Contact resistance: <250mΩ
Insulation resistance: >100MΩ
Life: 50,000 cycles
LED voltage: 3.5V |
|
S1192 |
|
- Switch type: SPST momentary
- Max contact rating: 100mA @ 32V DC
- Contact resistance: <250mΩ
- Insulation resistance: >100MΩ
- Life: 50,000 cycles
- LED voltage: 2.2V
|
|
Switch type: SPST momentary
Max contact rating: 100mA @ 32V DC
Contact resistance: <250mΩ
Insulation resistance: >100MΩ
Life: 50,000 cycles
LED voltage: 2.2V |
 |
S1250 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1270 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature rocker switches are pin for pin compatible with several other leading brands but at a fraction of the cost. DPDT solder tail mini rocker switch. |
 |
S1300 ROHS
|
|
|
|
Dress nut and cap to suit S 1390 series push button switches. |
 |
S1301 ROHS
|
|
|
|
Dress nut only to suit S 1390 series toggle switches. |
 |
S1302 ROHS
|
|
|
|
This cover screws on to the panel side of the switch, and doubles as the mounting nut. It protects the switch from moisture ingress through the front of the switch. |
 |
S1310 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1311 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
Includes an actuator that cannot be operated accidentally. To switch on or off the actuator must be pulled out before switching can take place.
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other lea |
 |
S1315 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1316 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1320 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1325 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1330 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1332 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1333 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
MOMENTARY ON BOTH SIDES. CENTRE OFF
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the S |
|
S1335 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1340 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1345 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1346 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Thread OD: 11.45mm
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1348 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
Includes an actuator that cannot be operated accidentally. To switch on or off the actuator must be pulled out before switching can take place.
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other lea |
 |
S1350 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1355 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1360 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1365 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1370 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1371 |
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
|
S1375 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1380 |
|
- Contact Resistance: 10mΩ max
- Insulation Resistance: 1,000M Ω min
- Dielectric Strength: 1500V a.c. 50/60Hz
- Soldering Temperature: 260°C
- Duration of Solder Immersion: 5 ± 1
- Resistance Low Temperature: -30 ± 3°C
- Resistance High Temperature: 85 ± 3°C
- Resistance Humidity Temperature: 40 ± 2°C
- Relative Humidity: 90-95%
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. |
 |
S1385 ROHS
|
|
- Contact Rating: 2A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-mThe Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom |
 |
S1391 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1392 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1393 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1395 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max.
- Initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 MΩ min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1398 ROHS
|
|
- Contact Rating: 0.5A @ 250V AC or 28V DC resistive load
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 10m Ohm max.
- Initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 MΩ min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Nickel Plated Brass
- Case: Melamine or Diallyl Phthalate (DAP)
- Housing: Stainless Steel
- Contact Material: Gold Plated Brass
- End Contact: Coin Silver, Silver Plated
- End Terminal: Silver Plated Brass
- Centre Contact & Terminal: Silver Plated Brass
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1399 ROHS
|
|
|
|
Cap only to suit S1390 series push button switches. |
|
S1403 ROHS
|
|
|
|
Cap only to suit S 1390 series push button switches. 7.8mm Dia. |
 |
S1405 ROHS
|
|
|
|
Momentary, 1.5A rated @ 250V AC |
 |
S1415 ROHS
|
|
- Contact Rating: 1.5A @ 240V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1421 ROHS
|
|
- Contact Rating: 1.5A @ 250V
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1425 ROHS
|
|
- Contact Rating: 20mA @ 20V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1450 ROHS
|
|
- Switch Type: 4PDT Alternate
- Contact Rating: 100mA @ 30V DC
- Contact Resistance: <30m Ohm
- LED: 1.5V DC Nominal
|
|
Locking push on, push off actuation. |
 |
S1451 ROHS
|
|
- Switch Type: 4PDT Alternate
- Contact Rating: 100mA @ 30V DC
- Contact Resistance: <30m Ohm
- LED: 1.5V DC Nominal
|
|
Locking push on, push off actuation. |
 |
S1452 ROHS
|
|
- Switch Type: 4PDT Alternate
- Contact Rating: 100mA @ 30V DC
- Contact Resistance: <30m Ohm
- LED: 1.5V DC Nominal
|
|
Locking push on, push off actuation. |
 |
S1481 ROHS
|
|
|
|
5mm overall diameter, 4mm height. |
 |
S1482 ROHS
|
|
|
|
7.5mm overall diameter, 4mm height. |
 |
S1493 ROHS
|
|
- Contact Rating: 20mA @ 20V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1495 ROHS
|
|
- Contact Rating: 20mA @ 20V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1498 ROHS
|
|
- Contact Rating: 20mA @ 20V max. AC / DC
- Electrical Life: 50,000 cycles at full load
- Contact Resistance: 20m Ohm max. initial at 24V DC @ 100mA
- Insulation Resistance: 1,000 M Ohm min.
- Dielectric Strength: 1000V RMS at Sea Level
- Operating Temperature: -30°C to 85°C
- Bushing: Glass Filled Nylon 66
- Case: Glass Filled Nylon 66
- Contact & Terminals: Copper Alloy with Gold Plate over Nickel Plate
|
|
The Salecom range of miniature and sub-miniature switches are pin for pin compatible with several other leading brands but at a fraction of the cost. Already many major manufacturers across Australia use the Salecom brand in preference
to the more expens |
 |
S1510 |
|
- Switch type: DPDT
- Contact rating: 200mA @ 250V AC
- Contact resistance: <10mΩ
|
|
Locking push on, push off actuation. |
 |
S1511 ROHS
|
|
- Switch type: DPDT
- Contact rating: 200mA @ 250V AC
- Contact resistance: <10mO
|
|
Locking push on, push off actuation. With Mounting Bar |
 |
S1513 |
|
- Switch type: 4PDT
- Contact rating: 200mA @ 250V AC
- Contact resistance: <10mΩ
|
|
Locking push on, push off actuation. |
 |
S1520 ROHS
|
|
- Switch Type: 4PDT Alternate
- Contact Rating: 300mA @ 30V DC
- Contact Resistance: <20mΩ
|
|
Locking push on, push off actuation.
5.5mm Black Round Knob to Suit (H 6660) |
 |
S1660 |
|
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min
- Electrical rating: 250V AC 5A
- LED: 12V (inbuilt resistor)
- Dielectric strength: 2kV AC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
|
|
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min
Electrical rating: 250V AC 5A
LED: 12V (inbuilt resistor)
|
 |
S1670 ROHS
|
|
- SPDT Momentary Action - Red
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Red
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC 5A
LED: 24V (inbuilt resistor)
Dielectric strength: 2kVAC, 50Hz, 1 min
Insulation res |
 |
S1671 ROHS
|
|
- SPDT Momentary Action - Green
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Green
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC 5A
LED: 24V (inbuilt resistor)
Dielectric strength: 2kVAC, 50Hz, 1 min
Insulation r |
 |
S1672 ROHS
|
|
- SPDT Momentary Action - Orange
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Orange
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC 5A
LED: 24V (inbuilt resistor)
Dielectric strength: 2kVAC, 50Hz, 1 min
Ins |
 |
S1673 ROHS
|
|
- SPDT Momentary Action - White
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - White
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC 5A
LED: 24V (inbuilt resistor)
Dielectric strength: 2kVAC, 50Hz, 1 min
Insulation r |
 |
S1674 |
|
- SPDT Momentary Action - Blue
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Blue
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC |
 |
S1675 |
|
- SPDT Momentary Action - Yellow
- Switch type: Momentary
- Body material: High grade thermoplastic
- Operating travel: 3.0mm
- Actuating force: 200-500gm
- Mech. lifetime: 1M operations min
- Electrical life: ≥50,000 operations min.
- Electrical rating: 250V AC 5A
- LED: 24V (inbuilt resistor)
- Dielectric strength: 2kVAC, 50Hz, 1 min
- Insulation resistance: ≥100MΩ
- Panel thickness: 8mm maximum
- Mounting hole diameter: 16mm
|
|
SPDT Momentary Action - Yellow
Switch type: Momentary
Body material: High grade thermoplastic
Operating travel: 3.0mm
Actuating force: 200-500gm
Mech. lifetime: 1M operations min
Electrical life: ≥50,000 operations min.
Electrical rating: 250V AC |
 |
S1698 ROHS
|
|
|
|
Suits S1670-1673 only. |
 |
S1699 ROHS
|
|
|
|
PCB mount socket to suit S1670-1673 series illuminated switches. |
 |
S1700 ROHS
|
|
- Colour: Red
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove |
 |
S1700A ROHS
|
|
- Switch Type: Momentary
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical Life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
 |
S1702 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
 |
S1702A ROHS
|
|
- Switch Type: Momentary
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical Life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
 |
S1704 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
 |
S1704A ROHS
|
|
- Switch Type: Momentary
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical Life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
 |
S1706 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Momentary
- Switch System: 1 NO & 1 NC contact block
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cover. Includes provision for a globe. |
 |
S1706A ROHS
|
|
- Switch Type: Momentary
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical Life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Momentary type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
|
S1720A ROHS
|
|
- Switch Type: Alternate
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Alternate type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
|
S1722 ROHS
|
|
- Colour: Green
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
|
S1722A |
|
- Switch Type: Alternate
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Alternate type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
|
S1724 ROHS
|
|
- Colour: Orange
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
|
S1724A ROHS
|
|
- Switch Type: Alternate
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1M operations min
- Electrical life: 100,000 operations min
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1kV AC, 50Hz, 1 min
- Insulation Resistance: 100MΩ min @ 500V DC
- Panel Thickness: 7mm maximum
- Mounting Hole Diameter: 16mmØ
|
|
Alternate type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. Alternatively a clear printed label can be placed behind the coloured cove. |
|
S1726 ROHS
|
|
- Colour: White
- Type: DPST
- Action: Alternate
- Switch System: 1 NO & 1 NC contact blocks
- Body Material: High grade thermoplastic
- Operating Travel: 3.0mm
- Actuating Force: 150gm
- Mech. Lifetime: 1 Million operations min
- Electrical Lifetime: 100,000 operations min.
- Electrical Rating: 250V AC 4A
- Dielectric Strength: 1500V AC, 50Hz, 1 minute
- Insulation Resistance: 1000MΩ min @ 500V DC
- Panel Thickness: 8mm maximum
- Mounting Hole Diameter: 16mm
|
|
Alternate action type illuminated switch incorporating a very positive, audible and tactile feel when operated. Includes provision for a globe. In-built diffuser can be directly engraved. |
