|
Description |
Downloads |
Specs |
Ordering |
|
 |
SL4547A
|
|
|
|
This 12Ah LiFEPO4 replacement battery is compatible in size with traditional 12Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
A0323 NEW
|
|
|
|
A comprehensive all-in-one USB travel charger to keep all your portable devices charged while at home or overseas! It features 65W USB C power delivery output for laptops, mag safe compatible wireless charging for your phone and a standard USB A QC3.0 output for simultaneous charging of up to 3 devices. |
 |
M8303 |
|
- Input voltage: a.c. 220-240V @ 50Hz
- Output voltage: 0 - 30V d.c.
- Output current max: 3A
- Supply regulation: CV≤1%+10mV
- Load regulation: CV≤1%+5mV
- Ripple: 200mVp-p
- Protection: Current limiting
- Voltmeter: LCD ±1% +2 digits
- Ammeter: LCD ±1% +2 digits
- Temperature: 0ºC-40ºC
- Humidity: Less than RH80%
- Operating time: 8hrs
- Dimensions: 85 x 160 x 205mm
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. |
 |
M8254 |
|
- Up to 20A output
- Fixed 13.8V voltage
- High efficiency switchmode design
- Low noise and ripple <100mV
- 2% voltage regulation
- Short circuit protected output
- Fused input
|
|
A fixed voltage output power supply designed for powering automotive, marine and comms equipment. |
 |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
N2087 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
SG4567 |
|
- Physical Size
- Length: 229mm
- Width: 138mm
- Height (Total inc. tabs): 213mm
- Weight: 17.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 660A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
M8195C NEW
|
|
- Compact design with 24000mAh (88.8Wh) internal battery pack
- 2400A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- 90W USB type C PD input and output
- Can be used as a USB power bank to keep devices charged on the go.
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
N2089 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- PV solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
N2089A |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with MPPT solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
M8187 |
|
- Nominal Input Power @ 240V AC: 500W
- Nominal Input Current: 2.2A
- Circuit Breaker Current: 3.0A
- Output Voltage: 120V
- Output Current: 4.2A
- Output Power: 250VA
- Dimensions: 158W x 100D x 120H mm
- Weight: 6.0Kg
|
|
M8187 500W, Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary Rating: 120V 4.2A |
 |
SL4566B
|
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
S4579 |
|
- General
- Dimensions: 410L x 176W x 227H mm (including tabs)
- Weight: 36kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 125Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current: 1300A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 40A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 126Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8213 |
|
- 1 to 30V @ 20A output
- Adjustable current limiting
- Regulated variable output voltage or fixed via 3 presets
- Auxiliary fixed output, max 5A
- Digital LED meters
- Overload & short circuit protected
- Extremely low ripple & noise
- Excellent regulation
- Highly efficient switchmode design
|
|
A 1-30V, 20A adjustable current limiting power supply. Both voltage and current settings may be set in fine or coarse modes allowing precise adjustments. Includes three programmable preset outputs. |
 |
SL4578A
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-130Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
SL4576W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 20kg. |
 |
SL4581A
|
|
|
|
This 12V 150Ah LiFEPO4 replacement battery is compatible in size with traditional 150Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SL4580W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 25kg. |
 |
SL4587A
|
|
|
|
This 12V 300Ah LiFePO4 replacement battery is compatible in size with traditional 300Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. |