|
Description |
Downloads |
Specs |
Ordering |
|
 |
M8213 |
|
- 1 to 30V @ 20A output
- Adjustable current limiting
- Regulated variable output voltage or fixed via 3 presets
- Auxiliary fixed output, max 5A
- Digital LED meters
- Overload & short circuit protected
- Extremely low ripple & noise
- Excellent regulation
- Highly efficient switchmode design
|
|
A 1-30V, 20A adjustable current limiting power supply. Both voltage and current settings may be set in fine or coarse modes allowing precise adjustments. Includes three programmable preset outputs. |
 |
SL4576W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 20kg. |
|
SL4580W
|
|
|
|
These slimline lithium (LiFePO4) batteries are for situations where space is at a premium these compact mountable batteries measure just 65mm high and weigh just 25kg. |
 |
SL4578A
|
|
|
|
This 12.8V 120Ah lithium battery (LiFePO4) is compatible in size with traditional 90-130Ah SLA batteries (check dimensions), but with all the benefits of cutting edge lithium technology. |
 |
S4579 |
|
- General
- Dimensions: 410L x 176W x 227H mm (including tabs)
- Weight: 36kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 125Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current: 1300A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 40A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 126Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
SL4547A
|
|
|
|
This 12Ah LiFEPO4 replacement battery is compatible in size with traditional 12Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SL4581A
|
|
|
|
This 12V 150Ah LiFEPO4 replacement battery is compatible in size with traditional 150Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SL4587A
|
|
|
|
This 12V 300Ah LiFePO4 replacement battery is compatible in size with traditional 300Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. |
 |
SL4566B
|
|
|
|
This 12V 50Ah LiFEPO4 replacement battery is compatible in size with traditional 50Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
 |
SG4567 |
|
- Physical Size
- Length: 229mm
- Width: 138mm
- Height (Total inc. tabs): 213mm
- Weight: 17.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 60Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8.3mΩ
- Max. Discharge Current (5s): 660A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 16.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 60Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
M9332A |
|
|
|
Compact 16V AC plugpack with 1.38A current output. Earthed connection.
Unit has bare ends (no tip fitted).
MEPS approved. |
 |
S4734
|
|
- Nominal Capacity: 2500mAh (0.2C, 2.5V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.6V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1250mA, Rapid charge : 4000mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 20A (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.5V
- Cell Weight: 45.0g max
- Cell Dimension: Height: 64.85±0.15mm, Diameter: 18.33±0.07mm
- Operating Temperature: Charge: 0 to 50°C, Discharge: -20 to 75°C
- Storage Temperature 1 year: -30~25°C, 3 months: -30~45°C, 1 month: -30~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. They offer a higher maximum current output than the standard 18650 batteries. |
 |
N2087 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
M8195C NEW
|
|
- Compact design with 24000mAh (88.8Wh) internal battery pack
- 2400A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- 90W USB type C PD input and output
- Can be used as a USB power bank to keep devices charged on the go.
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
M8303 |
|
- Input voltage: a.c. 220-240V @ 50Hz
- Output voltage: 0 - 30V d.c.
- Output current max: 3A
- Supply regulation: CV≤1%+10mV
- Load regulation: CV≤1%+5mV
- Ripple: 200mVp-p
- Protection: Current limiting
- Voltmeter: LCD ±1% +2 digits
- Ammeter: LCD ±1% +2 digits
- Temperature: 0ºC-40ºC
- Humidity: Less than RH80%
- Operating time: 8hrs
- Dimensions: 85 x 160 x 205mm
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. |
 |
D2325A NEW
|
|
- 4 in 1 design - charge your phone, earbuds, watch and another devices simultaneously.
- 15W wireless phone charging.
- Watch charging adaptor flips over to suit either Apple or Samsung watches.
- Auxiliary USB C output cable inside base.
- Folding design is ideal for travel use.
- Use laying flat or unfolded upright position.
- LED charge status indicators.
- USB-C cable included.
|
|
A powerful all in one charging stand for you to keep your watch, earbuds and phone charged up and ready to go when you need it. The folding design is ideal for travel too, allowing you to set up and start charging up to 4 devices simultaneously. |
 |
M8870 NEW
|
|
- Input: 110-240V AC 50/60Hz 1.8A (max)
- Output (USB C): 5V/3A, 9V/3A, 12V/3A, 15/3A, 20V/5A, 28V/5A
- (140W max PD 3.1/PPS)
- Output (USB A): 4.5V/5A, 5V/4.5A, 9V/2A, 12V/1.5A (18W max)
- Output (USB C1+2+3+USB A): 65W+45W+5V/4A (130W max)
- Dimensions: 65 x 65 x 32mm
|
|
140W four output USB wall charger with 3 x USB power delivery charging up to 140W max (PD 3.1/PPS). Equipped with GaN charging chip. |
 |
N2089A |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with MPPT solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
N2089 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- PV solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
M8976A |
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super-compact regulated power supplies. Energy authority approved. MEPS approved. All models are Energy Authority approved and suitable for shipping with other OEM products. Require P 8410C IEC lead. Dimensions: 167 x 65 x 40mm. |
 |
M8187 |
|
- Nominal Input Power @ 240V AC: 500W
- Nominal Input Current: 2.2A
- Circuit Breaker Current: 3.0A
- Output Voltage: 120V
- Output Current: 4.2A
- Output Power: 250VA
- Dimensions: 158W x 100D x 120H mm
- Weight: 6.0Kg
|
|
M8187 500W, Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary Rating: 120V 4.2A |
 |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
M8528 |
|
- Suitable for recharging of lead acid batteries or permanent maintenance charging.
- 3 stage charging.
- Reverse polarity protected
- Short circuit protected
- Easy plug in design fits a standard GPO.
- LED charge status indicators
- Automatic trickle charging.
- Suits 6V or 12V batteries
- 2600mAH charge current.
- Suits batteries from 6-12Ah (6V), 11-60Ah (12V)*
|
|
All models automatically switch from boost charge to trickle charge once full capacity is reached. |
 |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
 |
M8628B |
|
- Triple USB A ports
- Easy to use
- Great for keeping devices powered up in the car
- Sleek design
|
|
This triple charger allows you to power up to three devices in your car. Max combined current output is 7.2A. Ideal for couples, families and individuals with multiple devices. Charge a range of devices including; phones, tablets, cameras etc. |
