|
Description |
Downloads |
Specs |
Ordering |
|
![S9446D HD Camouflage/Scouting Surveillance DVR Camera](https://images.altronics.com.au/thb/s/S9446D.jpg) |
S9446D |
|
- High quality 16MP image resolution and full HD 1080P videos
- Selectable image resolution: 16MP/12MP/8MP/5MP/3MP/1.3MP/0.3MP
- Long detection and illumination range up to 10 meters with 90°
- Take PIR sensor angle: 40°
- Prepare PIR sensor angle: Left: 30°, Right: 30°
- 2.0" TFT built-in viewer, can playback photos and videos
- Quick trigger time 0.8sec
- Trigger interval: 5sec-1hr
- Photo burst: 1 to 9
|
|
These units are great for monitoring in remote locations, trail scouting etc. Runs off batteries, so its quick &amp easy to set up anywhere you need to keep an eye on things. Weatherproof case with LCD screen. |
![ZR6302G ROCK Model 4C Plus Single Board Computer](https://images.altronics.com.au/thb/z/ZR6302G.jpg) |
ZR6302G |
|
- On board on/off power button
- Integrated fan control forthermal management
- Dual-display support
- Two micro-HDMI ports
- Supports display resolutions up to 4K @ 60hz (1 x 2K up to 1440P@60, 1 x 4K 2.0 up to 4k@60)
- Multiple connectivity capabilities so less add on hardware required, including Bluetooth 5.0 with BLE, Gigabit Ethernet & Wireless LAN
- A 40P GPIO expansion header provides extensive compatibility with a wide range of accessories
- Get more multiple memory options, including 4GB RAM and a speed eMMC socket
- Compatible with most R-Pi 4 accessories, including cases, cameras and HAT modules
|
|
The OKdo ROCK 4C+ is a reliable, multifunctional and high-performing single-board computer based on a robust Rockchip RK3399T SoC, Dual Cortex® A72 CPU and Arm Mali™ T860MP4 GPU. |
![M8536B 6/12V 10A / 14.4V 9A Automotive Battery Charger](https://images.altronics.com.au/thb/m/M8536B.jpg) |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
![M8534B 6V/12V 6A / 14.4V 4.5A Automotive Battery Charger](https://images.altronics.com.au/thb/m/M8534B.jpg) |
M8534B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 6A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
![S9846A Wi-Fi 1080p HD Cube Camera Module](https://images.altronics.com.au/thb/s/S9846A.jpg) |
S9846A |
|
- 1920 x 1080 (1080p) video resolution, motion detection, loop recording and 140° wide angle
- On board microphone
- Motion detect recording
- SD card slot for local recording up to 128GB
- On board Wi-Fi (2.4GHz only)
- USB rechargeable
- Auto IR Night Vision
- Magnetic Bracket
- Cloud Storage
|
|
Can be used for general surveillance around the home or business. |
![T1462 Flexible Helping Hands Solder Stand](https://images.altronics.com.au/thb/t/T1462.jpg) |
T1462 NEW
|
|
- Sturdy steel base with recesses for dry tip cleaner, rosin flux and cleaning sponge.
- Non-slip rubber feet on industrial powdercoated metal base.
- Solder reel holder in-built.
- 4 segmented arms which stay in place when positioned.
- Rubber tipped spring clamps secure your parts in place while working.
- Includes dry tip cleaner, container of rosin tip flux and cleaning sponge
|
|
This handy bench top helper features 4 flexible arms for keeping items in position when working on them, making it ideal for soldering cables, PCBs and a range of hobbyist uses. Sturdy metal base. |
![T1463 Flexible Helping Hands With LED Magnifier](https://images.altronics.com.au/thb/t/T1463.jpg) |
T1463 NEW
|
|
- Sturdy steel base with recesses for dry tip cleaner, rosin flux and cleaning sponge.
- LED magnifier provides a crisp clear view.
- Non-slip rubber feet on industrial powdercoated metal base.
- Powered by USB C - cable included.
- Solder reel holder in-built.
- 4 segmented arms which stay in place when positioned.
- Rubber tipped spring clamps secure your parts in place while working.
- Includes dry tip cleaner, container of rosin tip flux, cleaning sponge and USB A to C power cable.
|
|
This handy bench top helper features an LED magnifying lamp, plus 4 flexible arms for keeping items in position when working on them, making it ideal for soldering cables, PCBs and a range of hobbyist uses. |
![D2208A Qi Wireless 15W Charging Auto Sensing Phone Car Mount](https://images.altronics.com.au/thb/d/D2208A.jpg) |
D2208A NEW
|
|
- Qi Wireless Charging
- Motorised to fit your phone automatically
- Comes with a USB Type C lead
- Safely use navigation apps in the car
- Air vent spring mount
- Suction cup mount
|
|
This 15 Watt Qi Wireless Charging Universal Phone Car Mount will not only charge your phone with its wireless fast charge feature but it will also allow you to safely use navigation apps in the car. |
![Z6424 Raspberry Pi Pico W With Wi-Fi](https://images.altronics.com.au/thb/z/Z6424.jpg) |
Z6424 NEW
|
|
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of on-board Flash memory
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
|
|
The Raspberry Pi Pico W is perfect for IoT and wireless projects, better still, it's such an affordable 32-bit microcontroller that is packed with peripheries including WiFi. |
![P8166 Rack Mounted Surge Protected 7 Way Power Board](https://images.altronics.com.au/thb/p/P8166.jpg) |
P8166 NEW
|
|
- 240V AC 10A outputs.
- 7 x Australian Sockets (AS/NZS 3112:2017 conforming).
- Electrical authority outlet device approved (AS/NZS 3105:2014 conforming).
- High surge protection.
- Overload protection.
- Power cord located at the rear for less interference.
- 19” rack ear mounting.
|
|
The neat solution to supplying mains power to your mounted equipment. |
![Z6516A 7](https://images.altronics.com.au/thb/z/Z6516A.jpg) |
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
![K9641 2.54mm Boxed Straight Header Connector Kit](https://images.altronics.com.au/thb/k/K9641.jpg) |
K9641 NEW
|
|
|
|
An assortment of straight pin boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties (10 of each plug and socket). Plus crimp pins to suit plug housings. 150pcs total. |
![K9645 1.25mm Boxed Header Connector Kit](https://images.altronics.com.au/thb/k/K9645.jpg) |
K9645 NEW
|
|
|
|
An assortment of right 1.25mm pitch angle boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties. |
![P8456 15cm 10A 3 Pin Socket Black Bare Ends Mains Power Cable](https://images.altronics.com.au/thb/p/P8456.jpg) |
P8456 |
|
- Fitted with 3 pin mains socket connector.
- 15cm length.
- 3 x 1mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
This 3 pin mains power socket cord is designed for use by OEM's and installers to connect to mains powered equipment. |
![H8126C 43](https://images.altronics.com.au/thb/h/H8126C.jpg) |
H8126C |
|
- Low profile design - only 55mm deep!
- +3 to 15° tilt adjustment.
- 60° swivel adjustment.
- Plastic mount covers provide a neat & tidy finish.
- Cable management guides.
- Built in levelling adjustment.
- Makes easy forward or backward viewing angle adjustments for reduced glare and eye strain.
- Sturdy and durable steel construction.
|
|
The new H 8126C is made of high-grade steel that delivers a lifetime of satisfaction. It can accommodate TVs up to 60kg in weight. In addition, it is able to tilt up and down from +3° to -15° and swivel up to 60° in either horizontal direction to find you best position while watching TV. |
![N0080G 80W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0080G.jpg) |
N0080G NEW
|
|
- Excellent performance under low light conditions, creating better kWh/kW ratio and produces an average of 2-3% more electricity.
- Anti reflective and self cleaning glass surface reduces power loss due to dirt and dust.
- Junction box and bypass diodes make sure the modules do not overheat or create a "hot spot" effect.
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. |
![D2357A USB Type C 3.1 4 Port External Hub](https://images.altronics.com.au/thb/d/D2357A.jpg) |
D2357A |
|
- 4 port USB type A ports that can each be accessed simultaneously.
- SuperSpeed USB 3.0 compliant, with data transfer rates up to 5 Gbps.
- Backward compatible with USB 2.0 and USB 1.0/1.1 specifications and devices.
- Work under Windows and Mac OS X, plus various Linux kernels without additional drivers
- Supports USB 3.0/2.0/1.x devices simultaneously.
- Plug-and-Play and hot-swap compatible.
|
|
This 4 Port USB3.0 Hub is an ideal solution for using with today’s Ultrabooks and thin-and-light laptops. |
![A2696A DAB+ FM Digital Tuner With Internet Radio Player](https://images.altronics.com.au/thb/a/A2696A.jpg) |
A2696A |
|
- High quality 430mm metallic cabinet
- Aluminium front panel
- Wifi and Ethernet RJ45 connection
- DAB+/DAB/FM/Bluetooth
- 2.4" TFT display
- External wireless antenna for extended range - RCA analogue out
- Optical and coaxial output
- 6.35mm stereo jack
- Remote control
|
|
Upgrade your digital radio experience with this Internet Radio with Wi-Fi and DAB+. The tuner is an outstanding digital radio with a premium design and finely tuned audio performance. |
![T2741A Stainless Steel Pliers Long/Needle Nose 5.5](https://images.altronics.com.au/thb/t/T2741A.jpg) |
T2741A |
|
- High quality stainless steel construction (AISI420J2)
- Ideal for pulling component legs through boards, component removal etc.
- Excellent choice for hobbies and crafts
- Spring loaded action
- High quality grips for long lasting comfort.
|
|
The ProsKit 1PK-369B is a long nose plier ideal for bending curves and straightening wire. |
![X0705A Digital Voice Recorder 32GB](https://images.altronics.com.au/thb/x/X0705A.jpg) |
X0705A |
|
- High Capacity Rechargeable Battery
- Low Battery Protection
- One-Button Recording
- Delete Function
- Highly Sensitive Stereo Microphone
- Password Protected
- Supports Multiple Formats
- Supports External Mic
|
|
This quality voice recorder features a sturdy diecast metal case for recording CD quality audio where ever you may need it. |
![L2047 TV Antenna Signal Booster](https://images.altronics.com.au/thb/l/L2047.jpg) |
L2047 |
|
- Provides up to 20dB gain
- Suitable for domestic use
- Easy in-line connection with PAL cables
|
|
Improves TV antenna reception in poor signal areas by boosting gain up to 20dB. Also suitable for DAB digital radio signals. |
![A3242A HDMI & One Way Infra-Red Cat6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3242A.jpg) |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
![T2040 Lead Free Soldering Iron Station 68W](https://images.altronics.com.au/thb/t/T2040.jpg) |
T2040 |
|
- LED Temperature Readout
- Soldering Stand
- Ergonomic Handle Design
- Auto Standby
- Auto Shutdown
- Precise Temperature Control
- ESD Safe
- Quick to reach temperature
|
|
The compact Micron 68W soldering station is an ideal entry level, general purpose soldering iron for students, enthusiasts and professionals alike. |
![M8195B 20000mAh 2500A Lithium Vehicle Battery Jumpstarter Pack](https://images.altronics.com.au/thb/m/M8195B.jpg) |
M8195B
|
|
- Compact design with 20000mAh internal battery pack
- 2500A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs (5V/3A each)
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
![SL4587A 12V 300Ah Lithium LiFePO4 Battery M8](https://images.altronics.com.au/thb/s/SL4587A.jpg) |
SL4587A
|
|
|
|
This 12V 300Ah LiFePO4 replacement battery is compatible in size with traditional 300Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. |