|
Description |
Downloads |
Specs |
Ordering |
|
 |
Q1255A |
|
- Use on wood, wall board, sheet rock, cardboard, plaster, concrete, mortar and more
- Big backlit LCD display
- Replaceable electrode pins
- 2-in1 Digital LCD readout and analog bargraph
- Simultaneous measurement, display of moisture and temperature readings
- Materials selection measurements
- MAX/MIN/DATA hold
- Auto power off
|
|
Designed to measure moisture in wood and building materials this handheld meter can test levels in sawn timber, plaster, concrete, mortar and many other hard materials. |
 |
K1148 |
|
|
|
This kit contains the parts to build your new smart friend. Tobbie is an intelligent six legged robot which provides great interaction with children. The little robot offers wonderful lights and sound effects.
|
 |
A3218B |
|
- 100m Range Max (depeding on cabling and resolution)
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz
- Supports 4K x 2K @ 60Hz
- Supports RS-232 signal bi-directional transmission, baud rate self-adaptive
- Supports LAN transmission wide band IR
|
|
Allows 1080p HDMI signals to be extended up to 100m from their source over a single Cat5e/6 cable, whilst retaining full high definition quality. Built in IR extender allows remote control of source devices. |
 |
T2460A |
|
- Suitable for lead free soldering applications
- Variable temperature control via LCD touch screen
- Zero switching circuitry for spike suppression
- High idle stability
- Fast heat recovery
- Interchangeable handle
- Three channels for stored temperature presets
|
|
A high power 100W benchtop electric soldering station for professionals and regular solderers! Touchscreen temperature control with presets. Supplied with fine 0.8mm round tip for soldering small pad sizes. |
 |
Q1053B |
|
- Jumbo display
- Continuity buzzer
- Square wave output
- Transistor tester
- Current measurement
- Voltage measurement
- Diode tester
- Low battery indicator
- Battery included
- Cat II 500V
|
|
This compact, affordable digital multimeter features 19 ranges, square wave output, continuity buzzer, in-built hFE transistor and diode test function. |
 |
P1896 |
|
|
|
Features interchangeable magnetic USB C and USB Micro B adaptors which can be left plugged into your devices when not connected. |
 |
M8976A |
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super-compact regulated power supplies. Energy authority approved. MEPS approved. All models are Energy Authority approved and suitable for shipping with other OEM products. Require P 8410C IEC lead. Dimensions: 167 x 65 x 40mm. |
 |
A4201 |
|
- SPECIFCATIONS:
- Power Output: 50 Watts RMS x 2 into 8 ohm
- Total Harmonic Distortion: <0.01% @30W; <5.0% @50W
- Minimum Speaker Impedance: 6 ohm
- Signal-to-Noise Ratio: 103 dB, A weighted
- Input Impedance: 2k ohm ± 5%
- Frequency response: 20-20,000 Hz
- Channel Separation: 95 dB
- Efficiency: 85%
- Dynamic Range: >100 dB
- Electrical Requirement: 24V DC @ 5A centre pin positive
- Dimensions: 50H x 86W x 143D mm
- Weight: 455g
- BLUETOOTH SPECIFICATIONS:
- Bluetooth version: BT V5.0
- Analog input sensitivity: 1-2V RMS
- Bluetooth range: 30m (line of sight)
- Decoding: SBC, MP3, AAC
- Output: A2DP, AVRCP
|
|
A compact, sturdy 2x50W RMS class-D stereo amplifier with 3.5mm input on the front and RCA input on the back for easy connection. |
 |
Z6315 |
|
|
|
A handy parts kit containing everything you need to start learning Arduino and building projects. Includes a huge selection of sensor boards, LEDs, pots, jumper wires, a breadboard, LCD screen and much more! |
 |
A2548 |
|
- Ultra compact design with USB PC interface
- Windows & Mac OSX compatible
- Powered via USB
- High/low/mid 3 band EQ
- Fader level control
- 48V phantom power button
- Mute buttons
- 3.5mm headphone output and mic input
- Channel -14dB to +40dB gain control
- Signal input and clip indicators
- -20dB pad switch
|
|
A perfect little mixer companion for your PC/laptop for home recording. Measuring only 124mm wide it takes up very little desk space whilst still offering features found on mixers twice the size - such as fader level control, three band EQ and effects. |
 |
T2444A |
|
- High insulation ceramic heating element for rapid heat up and instant recovery
- Burn proof iron lead
- Heater insulation of over 100MΩ
- Zero voltage circuit ensures no high voltage spikes or magnetic fields are present at the tip to damage sensitive components
- Temperature adjustable
- Powerful ball bearing fan
- Sturdy metal construction
- Improves work place comfort
- Supplied with iron stand and dry tip cleaner
- ESD safe
|
|
A high performance 60W soldering iron combined with a fume extractor, designed to keep your work area free from fumes and smoke. The all metal construction will ensure this professional station will last for years. |
 |
P8002 |
|
- Smooth control of dimmable LED loads, no configuration required
- Short circuit, thermal overload and over-current protection
- Two wire phase-control design
- Complies with Australian EMC standards
- User adjustable min/max brightness
- Soft start for increased lamp and driver life
- Suits standard Clipsal mech recesses
|
|
These dimmer mechanisms suit standard Clipsal mechanism wallplate recesses and offer LED compatible light dimming with soft start. |
 |
P8000 |
|
- Smooth control of dimmable LED loads, no configuration required
- Short circuit, thermal overload and over-current protection
- Two wire phase-control design
- Complies with Australian EMC standards
- Soft start for increased lamp and driver life
- Suits standard Clipsal mech recesses
|
|
These dimmer mechanisms suit standard Clipsal mechanism wallplate recesses and offer LED compatible light dimming with soft start. |
 |
X3260 |
|
- 5m yellow LED IP65 strip light (reduces insect attraction)
- LED dimmer module
- 12V car power adaptor
- 10 hook and loop ties
- Carry pouch
|
|
This handy strip lighting kit is great for setting up temporary lighting in tents, awnings, gazebos etc. |
 |
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
S4734
|
|
- Nominal Capacity: 2500mAh (0.2C, 2.5V discharge)
- Minimum Capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging Voltage: 4.2 ±0.05 V
- Nominal Voltage: 3.6V
- Charging Method: CC-CV (constant voltage with limited current)
- Charging Current: Standard charge: 1250mA, Rapid charge : 4000mA
- Charging Time: Standard charge : 3hours, Rapid charge : 2.5hours
- Max. Charge Current: 2600mA (ambient temperature 25°C)
- Max. Discharge Current: 20A (ambient temperature 25°C)
- Discharge Cut-off Voltage: 2.5V
- Cell Weight: 45.0g max
- Cell Dimension: Height: 64.85±0.15mm, Diameter: 18.33±0.07mm
- Operating Temperature: Charge: 0 to 50°C, Discharge: -20 to 75°C
- Storage Temperature 1 year: -30~25°C, 3 months: -30~45°C, 1 month: -30~60°C
|
|
These high performance 18650 lithium ion 3.7V batteries offer high performance and long life from a compact package. They are 18.6mm in diameter and 65mm long. They offer a higher maximum current output than the standard 18650 batteries. |
 |
Q0207 |
|
- General information
- • markers: for amplitude/voltage and frequency/time
- • input coupling: DC, AC and GND
- • 8 bit resolution
- • storage of display and data
- • supply from USB port (500mA)*
- • dimensions: 100x100x35mm / 3,9x3,9x1.4"
- Spectrum analyser:
- • frequency range: 0 .. 120Hz to 12MHz
- • linear or logarithmic timescale
- • operating principle: FFT (Fast Fourier Transform) • FFT resolution: 2048 lines
- • FFT input channel: CH1 or CH2
- • zoom function
- Transient recorder
- • timescale: 20ms/Div to 2000s/Div
- • max record time: 9.4hour/screen
- • automatic storage of data
- • automatic recording for more than 1 year • max. number of samples: 100/s
- • min. number of samples: 1 sample/20s
- Function generator
- • frequency range: sine from 0.5Hz to 1MHz
- • square and triangle from 0.5Hz to 500kHz
- • extended waveform library
- • amplitude range: 200mVpp to 8Vpp @ 1KHz//
- output impedance: 50ohm
- Oscilloscope
- • bandwidth: two channels DC to 12 MHz ±3dB • input impedance: 1 Mohm / 30pF
- • maximum input voltage: 30V (AC + DC)
- • time base: 0.1μs to 500ms per division
- • input range: 10mV to 3V/division
- • readouts: True RMS, dBV, dBm, p to p, Duty
- cycle, Frequency...
- • record length: 4K samples / channel
- • sampling frequency: 250Hz to 25MHz
- • sample history and digital grab function
- Bode plotter
- • Automated sync between oscilloscope and generator
- • Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
- • Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz
|
|
Pocket size PC oscilloscope and function generator. This small box contains a world of measuring tools! |
 |
C0995 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
 |
PB7311 |
|
- Connector: Type A Male, Gold
- Wire gauge: 26AWG
- Wire material: Bare copper
- Out-diameter: 8.5mm
- Resolution: 4K (3840 x 2160) @ 30Hz max.
- Data rate: 18GBPS
- Colour depth: 36BIT
- Type of shielding: Triple shield
|
|
HDMI certified. Lifetime warranty. This range is supplied in a plastic bag only, Features booster amplifier for lower grade screens. |
 |
T2163 |
|
- 1 x T2445 Soldering iron
- Desoldering pump
- 3 x Philips screwdrivers #0, #1 and #2
- 3 x Flat blade screwdrivers 3, 5 and 6mm
- 1 x Mini philips screwdriver 2.5mm
- 1 x Mini flat blade screwdriver 2.5mm
- Long nose pliers 5”
- Diagonal cutting pliers 4.5”
- IC Extractor
- Wire stripper & cutter
- Digital multimeter
- 8 Piece allen key set
- Solder
- 8 Way component storage box
- Tweezers (Long nose)
|
|
This 20 piece tool kit with handheld soldering iron contains all the essentials required for the field technician or the hobbyist who is just starting out. Will cover a wide variety of household and electronic jobs. All in a portable, durable padded zip-up carry case. |
 |
X0660 |
|
- IP67 waterproof (1 meter depth for 30 minutes)
- Float and flash
- Vibration water draining function
- Dual/tri-watch
- 5/1 watt switchable
- Large backlit display
- Programmable and priority scan
- Keypad lock
- Battery indicator
- Operating time up to 8hrs
|
|
An essential part of your safety kit the MX500 is a high performance radio, built tough to withstand the harshest marine environments. It is waterproof to IP67 if dropped overboard. It will not only float, but the radio will flash ensuring easy retrieval. |
 |
L2017C
|
|
- F-Type High Performance Balun
- Snap out reflectors
- Stainless Steel screws on connection points
- Designed and tested for digital/analogue reception
- Heavy Duty construction on all components
- 12mm extruded aluminium heavy duty elements
- Tough powder coated finish
- UV stabilised plastics
- Bifurcated rivets - Strongest in the industry
- U-bolts & Clamps fitted
|
|
Deluxe heavy duty VHF digital antenna manufactured with steel boom and extruded elements. |
 |
S9379 |
|
- HD Video Recording
- HD real-time recording brings users clear images while video recording and playback
- 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- Multi-platform Remote Access
- Fully compatible with iPhone & iPad, and Internet Explorer on Windows operating system
- AVTECH free CMS program on both Windows and MAC OS
- Powerful Storage Capacity
- Support up to 3 hard disks for long-term recording and saving large amount of recording data.
- Smart Recording
- High video resolution switch for events to optimize the recording efficiency of the hard disk.
- External Disk Array Support for More Video Storage
- eSATA interface built-in to connect a disk array (up to 4-bay disk array with RAID 0 and 1) for more video storage.
- Full HD HDMI Video Output
- 1920*1080 Full HD video output service, giving the best image quality on LCD / LED monitors.
- RS485 Communication
- Capable of external device connection to extend the functionality and flexibility of your NVR.
|
|
These network video recorders are designed to capture streams from up to 25 IP cameras with event notification via a remote monitoring app for Android or iOS devices. |
 |
Z6520 |
|
- Voltage: 5V or 3.3V
- Max power consumption: 110mA at 5v
- Interface: SPI
- Pixel resolution: 128x64
- Display size: 2.7 inch
- Module size: 85x58x6.5mm
|
|
This display provides 128x64 pixels, which is highly suitable for the Arduino controller. Thus by using hardware SPI, the response can be very fast. Meanwhile the powerful "u8glib" library for Arduino makes it easy to use. |
 |
Z6502 |
|
- Power Supply: 4.5～5.5V
- Microcontroller: ST7920
- Resolution: 128×64
- Display Colour: Blue lit with white character
- View angle: 170 °C
- LCD module: STN
- Control interface: 8/4 bits Parallel (Default) or 3 bits serial (SPI)
- Module size: 93x70x22mm (3.7x2.8x0.87'"")
- Visuable size: 73x39mm (2.9x1.5'"")
|
|
This LCD module uses a 128x64 liquid crystal display that supports Chinese characters, English characters and even graphics. It is suitable for interactive work with Arduino.
|
