|
Description |
Downloads |
Specs |
Ordering |
|
|
N0020F |
|
- Maximum power: 20W
- Nominal voltage: 12V
- Short circuit current (ISC): 1.25A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 1.16A
- Maximum power voltage: 17.2V
- Connection: 0.5m bare end fly lead
- Dimensions: 410 x 351 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 20W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
|
H5407 |
|
|
|
The much simpler solution compared to cage nuts. Unlike cage nuts, Rackstuds go in from the front which greatly simplifies their installation. Cage nuts can be quite tricky to get in, especially when the rack starts to get populated or the rack is in situ with the side panels installed. |
|
H5404 |
|
|
|
The much simpler solution compared to cage nuts. Unlike cage nuts, Rackstuds go in from the front which greatly simplifies their installation. Cage nuts can be quite tricky to get in, especially when the rack starts to get populated or the rack is in situ with the side panels installed. |
|
P7433 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
A1107A |
|
- Bluetooth chip: CSR8675
- Bluetooth supports profiles: RX: A2DP AVRCP TX: A2DP
- Operational Range: >80m (straight line transmission without occlusion)
- Battery: 1000MA
- Working Time: RX>20H, TX average>15H
- Charging Time: 4.5H
- Input voltage/current: DC 5V
- Input/output connection: SPDIF, 3.5mm stereo audio jack
- Audio CODEC: aptX HD, aptX Low Latency, apex, SBC
|
|
Operates both as a transmitter and receiver, allowing you to send music from your phone for playback through an amplifier or powered speakers OR to transmit audio from a non-bluetooth device to Bluetooth headphones or amplifier/ receiver. |
|
H8964 |
|
- High-quality, two-part ABS construction
- Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
|
|
A compact, snap together red and white case to suit the Raspberry Pi 4 Model B development board. Designed with all connection recesses and venting. |
|
P7436 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® 2.0 and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve.
|
|
H8958 |
|
- Great for better heat dissipation on the Pi 4.
- Access to all Pi Ports: Power, Video Audio, USB, LAN, MicroSD Card.
- Slots for camera cables and GPIO access.
- Compatible with the Raspberry Pi 4 Model B.
- Includes cooling fan with header connection.
- Protective fan grill.
|
|
This compact multi-layer acrylic case suits the Raspberry Pi Model B 4 and provides access to all ports on the board. To keep your Pi cool, a 5V fan with header connection is provided, plus grill cover. |
|
Q1340A |
|
- Transmitter
- Tone frequency: 130KHz
- Max. distance of transmission: 3km
- Max. distance of cable map: 300m
- Max. working current: ≦70mA
- Tone mode: Single tone
- Compatible connectors: For RJ45(8 pin)/RJ11(6 pin) cable map test. RJ45 SCAN socket : for RJ45 locating individual wire pairs RJ11 SCAN socket: for RJ11 locating individual wire pairs
- Cable types: RJ45 Lan cable Cat 5, 5e, 6(UTP/ STP), RJ11/12 telephone cable Cat 3 (6P/2C/4C/6C)
- Function selection: 5 Press button switch (POWER、SCAN/PoE. SCAN,TEST/FAST TEST、Ω,POL/TEL)
- Continuity test: 1 LED (≦300Ω), Coaxial cable & normal solid/Stranded wire by alligator clips patch cord.
- Max. signal voltage: 8Vp-p
- Cable map indication: 8 LEDs, Fast/Slow dual speed
- Shielded indication: 1 LED
- Telephone line polarity, status indication: 1 Dual color LED
- Live telecommunication equipment test and router test: Yes
- Voltage protection: DC 48V
- Auto power off: 1 hour
- Low battery display: 6.5V (Power LED flashes)
- Battery type DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pce)
- Dimension: 138L×80W×35D mm
- Weight: 140g
- Receiver
- Frequency: 130KHz
- The Max. working current: ≦115mA
- Compatible connectors: RJ45(8 pin)/RJ11(6 pin)
- Function selection: 4 Position mode switch (LED, NCV, OFF, SCAN)
- Earphone jack: 1
- Signal status indication: 1 dual colour LED & Buzzer
- Cable map indication: 8 LEDs
- Shielded indication: 1 LED
- NCV indication; 1 LED (AC90~1000V,≥50mm,≤100mm)
- LED illumination: 1 LED
- Power indication: 1 LED
- Battery type: DC 9.0V (NEDA 1604/ 6F22 DC9V ×1pcs)
- Dimension: 203L×50W×32D mm
- Weight: 95g
- Accessories: RJ45 cable patch cords, RJ11 cable patch cords, RJ11 to alligator clips patch cord,
- earphone, storage bag, user manual
|
|
This Noise-Filtering Network PoE Toner & Probe
allows users to quickly locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45, Lan cable Cat5, 5e, 6 (UTP/STP), RJ11/12 telephone cable Cat. 3 (2/4/6 pin) & normal solid/stranded wire by alligator clips patch cord. |
|
P7439 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® 2.0 and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7446 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Long term bending radius ≈20mm
- Includes plug protector for cable pulling through conduits/cavities.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
AOC (active optical cable) and HDMI technology supporting 4K @ 60Hz resolutions at lengths up to 100m. |
|
P7434 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
Z6454 |
|
- Works with BBC Micro:bit
- Micro:bit slot allows students to adjust and test code revisions
- Ideal for classroom & STEM workshop environments
- RGB LED light ring
- Easy wiring and construction
- Infra-red and ultrasonic based avoidance
- Line tracking capability
- Photo cell for light intensity detection
- Powered by long life 18650 lithium cells
- Bluetooth controllable
|
|
STEM bot is an easy to program 2 wheel obstacle avoidance and line tracking robot. Coding your program is easy using the standard BBC Micro:bit software. Wiring and construction has been designed to be as simple as possible. |
|
S9365 |
|
- H.264+/265+ compression
- 1080p HDMI monitor output
- Recording up to 5MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 4 x 15.4W PoE network interfaces
- Internal SATA interface, max 8TB
- Remote control & mouse
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF 2.4 support
|
|
This multi channel network video recorder offers 5MP resolution recording at 25fps per camera. It utilises H.264/H.265+ compression to maximise your hard disk space and has wide camera compatibility with ONVIF 2.4 support. |
|
P0686A |
|
|
|
20m SpeakOn connector to SpeakOn connector audio lead. Genuine SpeakOn connectors. Made with 2 core flexible cable connecting 1+ & 1- of the connector. |
|
P0685A |
|
|
|
10m SpeakOn connector to SpeakOn connector audio lead. Genuine SpeakOn connectors. Made with 2 core flexible cable connecting 1+ & 1- of the connector. |
|
A1116 |
|
|
|
This 2x25W RMS amplifier module with Bluetooth receiver sticks to your speaker magnet and connects to a pair of in-ceiling/in-wall speakers. Easy to install and works with Bluetooth enabled devices such as smartphones, tablets and laptops. Includes 15V power supply. |
|
S9396 |
|
- Monitor doorbell cameras or CCTV cameras
- Door call transfer to other monitors
- Call between monitors
- Monitor listening function
- Auto leave message function
- All weather IP66 diecast zinc alloy outdoor doorbell camera units
- Micro SD card slot
|
|
An ultra modern doorbell camera. |
|
T3190 |
|
|
|
Cable Lubricant is used to assist in the laying and pulling of cable into conduits under floors, under ground and more. |
|
P7502B |
|
|
|
Filtered VGA DE15 High Density Male-Male Lead, 2m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
|
P0693 |
|
|
|
Measures 5-15V DC. Designed to fit P-81, but can also be used standalone. 29mm mounting hole. 14mm thread length. |
|
X3300 |
|
- Input voltage: 12V DC
- Current per m: ≈750mA
- LEDs: 120pcs of SMD 2835 per metre.
- Weatherproof rating: IP65
- Lumens: 350-400 per metre.
- Colour Rating: 397nm
|
|
Use it in long lengths for stunning coloured lighting effects or cut and shape into your own custom 'neon' signs. |
|
M8199A
|
|
- 14Ah internal lithium-ion battery
- 100W modified sine wave 240V AC inverter
- 6A 4 x USB output (Type A, C & QC3.0)
- 3 x 2.1mm DC jack output (180W max)
- MPPT solar charger in-built
- Recharge by solar panel, mains or car charger
- In-built LED torch
- In-built reading LED light panel
- Colour LCD screen with capacity readout
- Ultra quiet operation
|
|
A complete mobile AC/DC power solution designed to be recharged via solar panels with in-built MPPT charging circuit. |
|
D2327 |
|
- QI Standard.
- Includes USB type A to type C cable
- Inbuilt over-voltage, under-voltage and short circuit protection
|
|
Say goodbye to charging cables! Got two phones with wireless charging. This handy USB charging pad will charge both devices at once. |
|
C9021A |
|
- Active Noise Cancelling technology
- Bluetooth 4.0 compatibility
- Volume, track selection, and power button located on earmuffs
- Up to 18 hours of talking and playback time
- Up to 120 hours of standby time
- Super large soft earmuffs
- Beautiful steel headband design
- Light weight but very robust
- Separate ANC on/off control
- Soft drawstring carry bag
- ANC on: Around 12 hours of continuous Bluetooth
- ANC off: Around 18 hours of continuous Bluetooth
|
|
Say goodbye to pesky outside interference with these super quiet noise cancelling headphones. Features 12 hours of listening time with bluetooth wireless listening. |