|
Description |
Downloads |
Specs |
Ordering |
|
 |
C2132 |
|
- Power Taps: 0.33, 0.66, 1.25 , 2.5, 5W
- Frequency Response: 100Hz- 15kHz
- Size: 200mm
- SPL (1W @ 1M): 93dB
- Hole Cutout (Ø): 246mm
- Connection: 2 way terminal block
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for |
 |
C2133 |
|
- Power Taps: 0.33, 0.66, 1.25 , 2.5, 5W
- Frequency Response: 100Hz- 15kHz
- Size: 200mm
- SPL (1W @ 1M): 93dB
- Hole Cutout (Ø): 246mm
- Connection: 2 way terminal block
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings fo |
 |
C2134C |
|
- This speaker and transformer combination is designed for both paging announcements and emergency tones in EWIS systems. Speakers employed in an EWIS installation must comply to AS1670.4. This dictates that the speakers must be fitted with transformer safety cover, cable restraint plate, line monitoring capacitor and 4 way wire protect terminal connection. This Redback EWIS speaker complies to this standard.
|
|
Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings fo |
 |
C2134VC |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency Response: 75Hz- 15kHz
- SPL (1W @ 1M): 93dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 4 way terminal block + 22uf bipolar capacitor
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. |
 |
C2135 |
|
- Excellent speech intelligibility.
- Engineered to meet Australian Standard AS1670.4
- High quality speaker driver developed for BGM, paging and emergency warning applications.
- Patented 6 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with cable restraint plate and transformer safety cover as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact styrene grille.
- 5 year warranty.
|
|
Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings fo |
 |
C2136 |
|
- Power Taps: 1.25, 2.5, 5, 10, 15W
- Frequency Response: 100Hz- 15kHz
- SPL (1W @ 1M): 90dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 2 way terminal block
|
|
Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |
 |
C2138 |
|
- Speaker driver: C 2120A
- Power Taps : 1.25, 2.5, 5, 10, 15 Watts
- Frequency Response: 45Hz-20kHz
- Resonant Frequency: 50Hz
- SPL 1W @ 1m: 91dB
- Terminal type: 4-way screw terminal & 22µF bipolar capacitor
- Tweeter Voice Coil Ø: 13mm
- Driver Voice Coil Ø: 25mm
- Ceiling cutout: 246mmØ
- Mounting depth: 94mm
- Transformer cover: No
- Cable restraint: No
|
|
Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |
 |
C2142 |
|
- Power rating: 15 watts
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Ceiling cutout: 246mm Ø
|
|
Specially engineered to deliver 100dB 1W/1m @ 1kHz for use in PA and fire evacuation systems where a high level of SPL and speech intelligibility is essential. Includes 15W 100V transformer, 4 way wire protect terminal block & 22μF bipolar capacitor. |
 |
C2150 |
|
- Power taps: 0.33, 0.66, 1.25 , 2.5, 5W
- Frequency response: 100Hz - 15kHz
- SPL 1W@ 1m: 90dB
- Connection: : 4 way terminal block + 22uF bipolar capacitor
- Overall mounting depth: 60mm (less thickness of ceiling).
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super fast installation & excellent speech intelligibility. Redback "One-Shot" speaker units install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings fo |
 |
C2157 |
|
- Power taps: 0.66, 1.25, 2.5, 5, 10W
- Frequency Response: 100Hz- 15kHz
- SPL 1W @ 1M: 94dB (+/- 2dB)
- Size: 100mm
- Hole Cutout (Ø): 140mm
- Connection: 4 way terminal block
- Colour: White
|
|
Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |
 |
C2160 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. It features flame retardent housing material, sealed cable gland entries and a tuned PA driver to suit the new approval requirements. |
 |
C2160A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2160 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
 |
C2161 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2171. At only 65mm overall height, these models are ideal for low profile ceiling spaces. It features flame retardent housing material, sealed cable gland entries and a tuned PA driver to suit the new approval requirements. |
 |
C2161A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2161 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
 |
C2168C |
|
- Power taps: 0.33, 0.66, 1.25 , 2.5, 5W
- SPL 1W @ 1m: 92dB @ 1KHz ±2dB
- Freq response: 100Hz - 15kHz
- Ceiling cutout: 140mm Ø
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility. |
 |
C2169 |
|
- Power taps: 0.33, 0.66, 1.25 , 2.5, 5W
- SPL 1W @ 1m: 92dB @ 1KHz ±2dB
- Freq response: 100Hz - 15kHz
- Ceiling cutout: 140mm Ø
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility. |
 |
C2170 |
|
- Electrical
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
- SPL 1W @ 1m: 90dB
- SPL 1W @ 4m: 78dB
- SPL 5W @ 1m: 97dB
- SPL 5W @ 4m: 85dB
- Frequency response: 100Hz-15kHz
- Coverage Angles: 1000Hz 182°, 2000Hz 163°, 4000Hz 77°
- Connection: 4 way terminal block + 22uF bipolar capacitor
- Approval: AS ISO7240.24
- Environmental Type: A (for indoor applications)
- SPL by tappings @ 1m
- 0.33W: 85.2dB
- 0.66W: 88.2dB
- 1.25W: 91.2dB
- 2.5W: 94dB
- 5W: 97dB
- Mechanical
- Material:
- White flame retardant ABS grille (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Red flame retardant ABS transformer dome cover (Starex VH-0800)
- Driver construction: Paper cone
- Ceiling cutout: 140mmØ
- Grille diameter: 159mmØ
- Mounting depth: 117mm (including ceiling tile thickness)
- Overall weight: 700g
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- IP Rating: IP21
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
 |
C2172 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
 |
C2260 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- White RAL9003 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. It can also be used for standard 100V PA/BGM installations. |
 |
C2260A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2260 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
 |
C2260AB |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2260 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
 |
C2261 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- Black RAL9004 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. |
 |
C2270 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- White RAL9003 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
 |
C2271 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- Black RAL9004 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
 |
CB2134VC |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency Response: 75Hz- 15kHz
- SPL (1W @ 1M): 93dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 4 way terminal block + 22uf bipolar capacitor
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. |
