|
Description |
Downloads |
Specs |
Ordering |
|
![CF0704 5W 100V 100mm (4”) Fire Speaker Black AS ISO7240.24](https://images.altronics.com.au/thb/c/CF0704.jpg) |
CF0704 |
|
- Electrical
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 88dB (1W @ 1m), 76dB (1W @ 4m)
- Maximum Sound Pressure Level: 95dB (5W @ 1m), 83dB (5W @ 4m)
- Frequency Response: 100Hz – 15kHz
- Coverage Angle (-6dB): 1000Hz: 140°, 2000Hz: 105°, 4000Hz 80°
- Environmental Type: A (for indoor applications as per standard)
- Line Monitoring: Yes, 22µF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Mechanical
- Speaker Component: 100mm (4”) paper cone speaker
- Material:
- Black flame retardant ABS grille and housing (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Mounting Method: Surface Attachment
- IP Rating: IP 21C
- Dimensions: 210Ø x 67mm
- Weight: 0.81kg
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- Additional Installation Accessories
- C 0699 Conduit mounting plate
|
|
Designed to meet AS ISO7240.24:2018*. Fire version of our popular One-Shot C 0703 speaker. It features flame retardent housing material and a tuned PA driver to suit the new approval requirements. One-Shot design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably. |
![C6115 75W PA Compression Driver](https://images.altronics.com.au/thb/c/C6115.jpg) |
C6115 |
|
- Rated power: 75W
- Max power: 150W
- Impedance: 8 Ohm
- Freq response: 800Hz-20kHz
- Sensitivity 1W @ 1m: 110dB
- Voice coil diameter: 51.2mm
- Magnet weight: 1132g
|
|
For high power PA use. Incorporates industry standard mounting thread, aluminium voice coil former and titanium diaphragm. |
![C2160A 100mm 100V 5W Ceiling EWIS Speaker White Grille](https://images.altronics.com.au/thb/c/C2160A.jpg) |
C2160A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2160 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
![C2121 165mm (6.5](https://images.altronics.com.au/thb/c/C2121.jpg) |
C2121 |
|
- Power taps: 1.25, 2, 5, 10, 15W
- SPL 1W @ 1m: 88dB
- Freq. response: 60Hz - 20kHz
- Grill Type: Aluminium
- Mounting hole: ~195mmØ
- Mounting depth: 98mm
|
|
The C 2121 is a 165mm (6.5") high power coaxial speaker fitted with a 15W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting. |
![CF0705 100mm (4”) 100V 5W Surface Mount Speaker White AS ISO7240.24](https://images.altronics.com.au/thb/c/CF0705.jpg) |
CF0705 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems - NO EXTERNAL EQ REQUIRED.
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
A surface mount fire speaker featuring flame retardant housing material and PA Driver to suit the new approval requirements. |
![C2126B 200mm (8](https://images.altronics.com.au/thb/c/C2126B.jpg) |
C2126B |
|
- Speaker Size: 200mm
- Colour: White
- Speaker Type: Fire / Evac 100V Twin Cone
- Driver Used: C 2118B
- Power taps: 1.25, 2, 5, 10, 15W
- SPL 1W @ 1m: 94dB
- Freq. response: 55Hz - 15kHz
- Grill Type: Steel
- Mounting hole: ~237mmØ
|
|
These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typical applications include medical centres, shopping malls, restaurants, bou |
![C2179 165mm (6.5](https://images.altronics.com.au/thb/c/C2179.jpg) |
C2179 |
|
- Size: 165mm
- Colour: White
- Speaker Type: 8 Ohm Coaxial
- Grille: Steel
- Power Taps (Watts): 30W
- Frequency Resp: 65Hz - 20kHz
- SPL 1W@1m: 90dB
- Cutout: 195Ø
|
|
Stylish, high performance, architecturally unobtrusive speaker/grille combinations which can be painted to match decor. Super easy to install. |
![C2097 100mm (4](https://images.altronics.com.au/thb/c/C2097.jpg) |
C2097 |
|
- Power taps: 2.5, 5, 10, 15W
- Freq. response: 70Hz - 12kHz
- SPL 1W@1m: 87dB
- Dimensions (mm): 167Ø x 125H
- Cutout size (mm): 140Ø
|
|
This IP55 rated bathroom speaker, employs a 100mm high performance driver, constructed from an all-weather polypropylene cone and rubber surround. Fitted with a high quality 100V line matching transformer tapped at 2.5, 5, 10 & 15W. Installation |
![C2170 100mm 100V 5W Ceiling EWIS Speaker White Plastic Grille](https://images.altronics.com.au/thb/c/C2170.jpg) |
C2170 |
|
- Electrical
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
- SPL 1W @ 1m: 90dB
- SPL 1W @ 4m: 78dB
- SPL 5W @ 1m: 97dB
- SPL 5W @ 4m: 85dB
- Frequency response: 100Hz-15kHz
- Coverage Angles: 1000Hz 182°, 2000Hz 163°, 4000Hz 77°
- Connection: 4 way terminal block + 22uF bipolar capacitor
- Approval: AS ISO7240.24
- Environmental Type: A (for indoor applications)
- SPL by tappings @ 1m
- 0.33W: 85.2dB
- 0.66W: 88.2dB
- 1.25W: 91.2dB
- 2.5W: 94dB
- 5W: 97dB
- Mechanical
- Material:
- White flame retardant ABS grille (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Red flame retardant ABS transformer dome cover (Starex VH-0800)
- Driver construction: Paper cone
- Ceiling cutout: 140mmØ
- Grille diameter: 159mmØ
- Mounting depth: 117mm (including ceiling tile thickness)
- Overall weight: 700g
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- IP Rating: IP21
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
![C2120B 200mm (8](https://images.altronics.com.au/thb/c/C2120B.jpg) |
C2120B |
|
- Power Taps : 1.25, 2.5, 5, 10, 15 Watts
- Frequency Response: 45Hz-20kHz
- Resonant Frequency: 50Hz
- SPL 1W @ 1m: 90dB @ 1KHz +/- 2dB.
- Terminal type: 4-way screw terminal & 22µF bipolar capacitor
- Tweeter Voice Coil Ø: 13mm
- Driver Voice Coil Ø: 25mm
- Ceiling cutout: 185mmØ
- Mounting depth: 94mm
- Transformer cover: No
- Cable restraint: No
|
|
For applications where high power, high performance sound reproduction is required, ie. bars, boutiques, clubs etc. Supplied with a 15W 100V transformer. |
![CF0703 5W 100V 100mm (4”) Fire Speaker White AS ISO7240.24](https://images.altronics.com.au/thb/c/CF0703.jpg) |
CF0703 |
|
- Electrical
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 88dB (1W @ 1m), 76dB (1W @ 4m)
- Maximum Sound Pressure Level: 95dB (5W @ 1m), 83dB (5W @ 4m)
- Frequency Response: 100Hz – 15kHz
- Coverage Angle (-6dB): 1000Hz: 140°, 2000Hz: 105°, 4000Hz 80°
- Environmental Type: A (for indoor applications as per standard)
- Line Monitoring: Yes, 22µF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Mechanical
- Speaker Component: 100mm (4”) paper cone speaker
- Material:
- White flame retardant ABS grille and housing (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Mounting Method: Surface Attachment
- IP Rating: IP 21C
- Dimensions: 210Ø x 67mm
- Weight: 0.81kg
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- Additional Installation Accessories
- C 0699 Conduit mounting plate
|
|
Designed to meet AS ISO7240.24:2018*. Fire version of our popular One-Shot C 0703 speaker. It features flame retardent housing material and a tuned PA driver to suit the new approval requirements. One-Shot design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably. |
![C0715 200mm 5W 100V White One-Shot Surface Mount EWIS Speaker](https://images.altronics.com.au/thb/c/C0715.jpg) |
C0715 |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency response: 75Hz - 15kHz
- SPL 1W@1m: 93dB
- Connection: 4 way wire protect terminal & 22uF bipolar cap
- Dimensions: 310Ø x 85Hmm.
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super Fast Installation. Save Time & Money!
Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs or inacce |
![C2186 165mm (6.5](https://images.altronics.com.au/thb/c/C2186.jpg) |
C2186 NEW
|
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts
- SPL 1W @ 1m: 91dB @ 1kHz ±2dB
- Freq response: 90Hz - 20kHz
- Grille: Steel
- Ceiling cutout: 195mm Ø
- Mounting depth: 100mm
- Terminal type: 2 way screw terminal
|
|
The C2186 is a 165mm (6.5") dual cone speaker with a 5W transformer. |
![C2127A 200mm (8](https://images.altronics.com.au/thb/c/C2127A.jpg) |
C2127A |
|
- Power taps: 0.33, 0.66, 1.25, 2, 5W
- SPL 1W @ 1m: 89dB
- Freq response.: 100Hz - 15kHz
- Grill Type: Steel
- Mounting hole: ~237mmØ
- *Picture for illustration purposes only.
|
|
C 2127 is a 200mm (8") dual cone speaker fitted with a 5W transformer. |
![C2060 10W 100V EWIS IP66 Black Plastic Horn PA Speaker](https://images.altronics.com.au/thb/c/C2060.jpg) |
C2060 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Based on the popular C 2050 Redback horn speaker this all new release has been developed to offer similar performance at a substantially reduced price. A compact PA horn speaker with installation time saving features patented by Redback. Ideal for general paging and public address system needs, this horn offers excellent performance in a compact pa |
![C2050 10W 100V EWIS IP66 Grey Plastic PA Horn Speaker](https://images.altronics.com.au/thb/c/C2050.jpg) |
C2050 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Exclusive design incorporates a dog leg mounting bracket which eliminates the need to separate the horn from the bracket during installation. A real time & money saver! Traditional horn speaker brackets have to be removed, screwed to the wall surface, and then bolted back onto the horn speaker. |
![CB2134VC 200mm (8](https://images.altronics.com.au/thb/c/CB2134VC.jpg) |
CB2134VC |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency Response: 75Hz- 15kHz
- SPL (1W @ 1M): 93dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 4 way terminal block + 22uf bipolar capacitor
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. |
![C0704A 100mm 5W 100V Black One-Shot Surface Mount PA Speaker](https://images.altronics.com.au/thb/c/C0704.jpg) |
C0704A |
|
- Power taps: 0.33, 0.66, 1.25, 2.5 and 5W
- SPL 1W @ 1m: 90dB
- Freq. Resp.: 100Hz-20kKz
- Connection: 4 way wire protect terminal + 22uF bipolar cap
- Overall Dimensions: 220mmØ x 72mm high.
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super Fast Installation. Save Time & Money! Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs. |
![C2117B High Output 15W 100V 200mm (8”) PA Speaker](https://images.altronics.com.au/thb/c/C2117B.jpg) |
C2117B |
|
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Terminal type: 4 way screw terminal & 22µF bipolar cap
- Ceiling cutout: 185mm Ø
- Mounting depth: 75mm
- Transformer cover: No
- Cable restraint: No
|
|
Specifically engineered for use in PA and fire evacuation systems where a high level of SPL and speech intelligibility is essential.
|
![C2130 200mm (8](https://images.altronics.com.au/thb/c/C2130.jpg) |
C2130 |
|
- Power Rating: 8Ω 50W
- Frequency Response: 40Hz- 15kHz
- SPL (1W @ 1M): 90dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
|
|
Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |
![C2134VC 200mm (8](https://images.altronics.com.au/thb/c/C2134VC.jpg) |
C2134VC |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency Response: 75Hz- 15kHz
- SPL (1W @ 1M): 93dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 4 way terminal block + 22uf bipolar capacitor
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. |
![C1005 Mounting Bracket PA Speaker To Suit C1004A](https://images.altronics.com.au/thb/c/C0997.jpg) |
C1005 |
|
|
|
Black powdercoated steel bracket specifically designed to suit the C1004A club speaker. Comes included with the required hardware to mount the speaker to the bracket. |
![C2119 165mm (6.5](https://images.altronics.com.au/thb/c/C2119.jpg) |
C2119 |
|
- Size: 165mm
- Colour: White
- Speaker Type: 8 Ohm Coaxial
- Driver Used: -
- Grille: Aluminium
- Power Taps (Watts): 30W
- Frequency Resp: 65Hz - 20kHz
- SPL 1W@1m: 90dB
- Cutout: 195Ø
|
|
Stylish, high performance, architecturally unobtrusive speaker/grille combinations which can be painted to match decor. Super easy to install with a "Flip- Lock" mounting system. |
![C2051 10W 100V EWIS IP66 White Plastic PA Horn Speaker](https://images.altronics.com.au/thb/c/C2051.jpg) |
C2051 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Exclusive design incorporates a dog leg mounting bracket which eliminates the need to separate the horn from the bracket during installation. A real time & money saver! Traditional horn speaker brackets have to be removed, screwed to the wall surface, and then bolted back onto the horn speaker. |
![C0703A 100mm 5W 100V White One-Shot Surface Mount PA Speaker](https://images.altronics.com.au/thb/c/C0701.jpg) |
C0703A |
|
- Power taps: 0.33, 0.66, 1.25, 2.5 and 5W
- SPL 1W @ 1m: 90dB
- Freq. Resp.: 100Hz-20kKz
- Connection: 4 way wire protect terminal + 22uF bipolar cap
- Overall Dimensions: 220mmØ x 72mm high.
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super Fast Installation. Save Time & Money! Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs. |