|
Description |
Downloads |
Specs |
Ordering |
|
![C1035 1200W PA Column Speaker with Subwoofer Pair](https://images.altronics.com.au/thb/c/C1035.jpg) |
C1035 NEW
|
|
- Speaker column is housed in an aluminum alloy cabinet for added durability.
- Subwoofer is made of a high-quality plywood sprayed with black environmental protection paint for the rough and tumble of hire use.
- Dual 8" woofers in each subwoofer unit (total 4 drivers)
- High power four channel class D power amplifier module.
- 2 channel inputs via 3 pin XLR/6.35mm balanced/unbalanced combination sockets.
- Dual balanced 3 pin XLR outputs.
- Built-in bluetooth module for streaming from your favourite devices.
- Speaker pole connects easily to the subwoofer and can be adjusted to change sound dispersion.
- Built in DSP processor allows multiple presets to be stored and recalled.
- Built in effect processing.
- All functions are integrated into one system, which is easy to operate and quick to start.
|
|
This 1200W PA column speaker system is a plug and play active speaker system ideal for small live shows, small parties, bands, musicians or anywhere foreground sound reinforcement is required. |
![C1034 1000W PA Column Speaker with Subwoofer Pair](https://images.altronics.com.au/thb/c/C1034.jpg) |
C1034 NEW
|
|
- Speaker column is housed in an aluminum alloy cabinet for added durability.
- Subwoofer is made of a high-quality plywood sprayed with black environmental protection paint for the rough and tumble of hire use.
- 12" driver in each subwoofer unit.
- High power four channel class D power amplifier module.
- 2 channel inputs via 3 pin XLR/6.35mm balanced/unbalanced combination sockets.
- Dual balanced 3 pin XLR outputs.
- Built-in bluetooth 5.0 module for streaming from your favourite devices.
- Speaker pole connects easily to the subwoofer and can be adjusted to change sound dispersion.
- Built in DSP processor allows multiple presets to be stored and recalled.
- Built in effect processing.
- All functions are integrated into one system, which is easy to operate and quick to start.
|
|
This 1000W PA Column Speaker system is a plug and play active speaker system ideal for small live shows, small parties, bands, musicians or anywhere foreground sound reinforcement is required. |
![C2190A 200mm (8](https://images.altronics.com.au/thb/c/C2190A.jpg) |
C2190A NEW
|
|
- Redback® “Fast-Fix” speaker utilise a time saving flip lock mounting method. It results in a finish with no visible screw heads or caps. The flip lock tabs slide outwards as the speaker is screwed into the hole, securing the speaker to the ceiling material from the top side. Suitable for use with any 8-33mm ceiling tile, including gyprock, mineral fibre or fixed gyprock ceilings. We recommend using our T 2314A holesaw to cut the speaker hole.
|
|
The C 2190A is a high power 30W PA speaker designed for BGM, paging & emergency warning applications. The offset transformer mounting allows mounting in ceilings with limited recess space. |
![P8099 Wall Mount Plate for C5215/16 Subwoofers](https://images.altronics.com.au/thb/p/P8099.jpg) |
P8099 NEW
|
|
|
|
All slimline wall mounting plate to suit C5215 and C5216 Biema slimline subwoofers. |
![C2026A 25W 8 Ohm Weather Proof IP65 Plastic PA Horn Speaker](https://images.altronics.com.au/thb/c/C2026.jpg) |
C2026A NEW
|
|
- Impedance: 8Ω
- Power Rating: 25W
- IP Rating: IP65
- SPL: 108dB, 1W @ 1m
- Freq. Resp.: 250Hz - 10kHz
- Dimensions: 300 x 180 x 290mm
|
|
This horn is compact, lightweight, weatherproof and very efficient. The voice coil is wound on an aluminium bobbin providing effective heat transfer from the coil thereby improving the efficiency and reliability of the speaker. |
![C0895A 165mm 6W 100V Surface Mount ABS Wall Speaker With Volume](https://images.altronics.com.au/thb/c/C0895A.jpg) |
C0895A NEW
|
|
- Stylish low profile sloping profile case.
- Flush mount metal grille.
- Tamper proof security screw wall bracket.
- Side mount volume level control with evacuation system override relay
- 100V line monitoring capacitor.
|
COMING SOONThis item is arriving soon. |
A slimline 6.5” loudspeaker constructed from high impact ABS with metal mesh grill. |
![C0891A 165mm 6W 100V Surface Mount ABS Wall Speaker](https://images.altronics.com.au/thb/c/C0891A.jpg) |
C0891A NEW
|
|
- Stylish low profile sloping profile case.
- Flush mount metal grille.
- Tamper proof security screw wall bracket.
- 100V line monitoring capacitor.
|
COMING SOONThis item is arriving soon. |
A slimline 6.5” loudspeaker constructed from high impact ABS with metal mesh grill. |
![C2271 100mm 100V 6W Ceiling EWIS Speaker Black Metal Grille (V2)](https://images.altronics.com.au/thb/c/C2271.jpg) |
C2271 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- Black RAL9004 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
![C5216 200W 8 Ohm Low Profile Subwoofer - Black](https://images.altronics.com.au/thb/c/C5216.jpg) |
C5216 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
![C5215 200W 8 Ohm Low Profile Subwoofer - White](https://images.altronics.com.au/thb/c/C5215.jpg) |
C5215 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
![C2270 100mm 100V 6W Ceiling EWIS Speaker White Metal Grille (V2)](https://images.altronics.com.au/thb/c/C2270.jpg) |
C2270 NEW
|
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with powdercoated steel grille.
- White RAL9003 mesh grille.
- Low profile design is only 70mm deep (penetrates ceiling by only 58mm with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way pluggable wire protect terminal for loop in, loop out wiring.
- Integral cable channel in rear housing for easy running of connection cables.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- 5 year warranty.
|
|
Approved for AS ISO7240.24 installations. We’ve refined the One-Shot even further with the new V2 One-Shot fire speaker. |
![C2260AB 100mm 100V 5W Ceiling EWIS Speaker White Metal Grille](https://images.altronics.com.au/thb/c/C2260AB.jpg) |
C2260AB |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2260 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
![C0870A 165mm 2 Way Round Wi-Fi Ceiling Speaker Pair](https://images.altronics.com.au/thb/c/C0870A.jpg) |
C0870A NEW
|
|
- In-built wifi (802.11b/g/n) 2.4GHz with smartphone, tablet or PC control
- In-built 2 x 30W RMS amplifier
- Includes active [Master] speaker and passive speaker units - 60W RMS
- High performance Polypropylene woofer and silk dome tweeter
- Supports multi-room/zone installations
- In-app content, zone and output level control [Smartsonix]
- Tool-FreeAuto Locking Mechanism
- Phoenix Type Connectors
- Tweeter Bridge Handle
- Includes 24V d.c. 2.5A power supply
|
|
Experience wireless music streaming throughout your home with these high performance kevlar cone speakers. They connect to your home wireless router and allow you to stream music directly from your device. Playback can be via stored music, podcasts, Spotify etc. |
![C1064 High Power 150W IP55 100V Black PA Speaker](https://images.altronics.com.au/thb/c/C1064.jpg) |
C1064 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
![C1063 High Power 150W IP55 100V White PA Speaker](https://images.altronics.com.au/thb/c/C1063.jpg) |
C1063 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
![C1062 High Power 60W IP56 100V Black PA Speaker](https://images.altronics.com.au/thb/c/C1062.jpg) |
C1062 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
![C1061 High Power 60W IP56 100V White PA Speaker](https://images.altronics.com.au/thb/c/C1061.jpg) |
C1061 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
![C2039 30W 100V Explosion Proof PA Horn Speaker](https://images.altronics.com.au/thb/c/C2039.jpg) |
C2039 NEW
|
|
- Material/Colour: Flame retardant antistatic nylon, black
- Rated Power Taps: 5W/10W/15W/30W
- Power Tap Wiring: 5W Yellow, 10W Orange, 15W Red, 30W Brown, Black Common.
- Built-in Audio Transformer: 70V/100V, 5W/10W/15W/30W
- Effective Frequency Range: 300 Hz - 8000 Hz
- Ingress Protection Rating: IP66
- Ambient Temperature: -40 to +55°.
- Relative Humidity: 10% - 95%
- Input AC Resistance: 8±15%Ω
- Sound Coil DC Resistance: 6.4 ±7%Ω
- Explosion Proof Standard: EN IEC 60079-0:2018, EN 60079-1:2014, EN IEC 60079-7:2015/A1:2018, EN 60079-31:2014, EN 60079-14-2014
- Dimensions: 250Ø x 325D mm
- Weight: 4kg
|
|
C 2039 is an anti-static nylon material, anti-ultraviolet and durable explosion-proof speaker with ATEX / IECEx certification for dust and gas atmosphere. |
![CF1520W 10W 100V EWIS IP66 AS ISO7240.24 Fire PA Sound Projector White](https://images.altronics.com.au/thb/c/CF1520W.jpg) |
CF1520W |
|
- Requires no external equalisation to meet AS ISO7240
- Weather resistant
- Durable powder coated mounting bracket
- Stainless steel fixings
- Flame retardent
- Designed to meet AS ISO7240.24 for fire & evacuation installations
|
|
Approved for use in fire & evacuation systems in Australia (AS ISO 7240.24:2018). Our first One-Shot sound projector, designed to save installers time and money. |
![CF1520B 10W 100V EWIS IP66 AS ISO7240.24 Fire PA Sound Projector Black](https://images.altronics.com.au/thb/c/CF1520B.jpg) |
CF1520B |
|
- Requires no external equalisation to meet AS ISO7240
- Weather resistant
- Durable powder coated mounting bracket
- Stainless steel fixings
- Flame retardent
- Designed to meet AS ISO7240.24 for fire & evacuation installations
|
|
Approved for use in fire & evacuation systems in Australia (AS ISO 7240.24:2018). Our first One-Shot sound projector, designed to save installers time and money. |
![CF1520G 10W 100V EWIS IP66 AS ISO7240.24 Fire PA Sound Projector Grey](https://images.altronics.com.au/thb/c/CF1520G.jpg) |
CF1520G |
|
- Requires no external equalisation to meet AS ISO7240
- Weather resistant
- Durable powder coated mounting bracket
- Stainless steel fixings
- Flame retardent
- Designed to meet AS ISO7240.24 for fire & evacuation installations
|
|
Approved for use in fire & evacuation systems in Australia (AS ISO 7240.24:2018). Our first One-Shot sound projector, designed to save installers time and money. |
![A2387A 6 Zone 300W Speaker Switcher With Volume Control](https://images.altronics.com.au/thb/a/A2387A.jpg) |
A2387A NEW
|
|
- Pluggable screw terminal connections
- 300W total RMS continuous power handling
- Heavy duty transformer based impedance system protects against power loss
- Left and right channels are completely isolated for safe operation with any amplifier
- Quick connect terminals will accomodate 16AWG to 22AWG wire
- Can be connected to two different amplifiers via A/B switch
- Circuit breaker protected
|
|
The A2387A is a high-power, dual-source, autoformer based speaker selector. Dual source operation makes two different amplifiers/receivers drive selected speakers simultaneously. |
![CF2242 200mm 100V 15W Ceiling EWIS Speaker White Metal Grille](https://images.altronics.com.au/thb/c/CF2242.jpg) |
CF2242 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Overall depth only 100mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
COMING SOONThis item is arriving soon. |
CF2242 is a ceiling mount 15W speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. White metal grille finish. |
![K9645 1.25mm Boxed Header Connector Kit](https://images.altronics.com.au/thb/k/K9645.jpg) |
K9645 NEW
|
|
|
|
An assortment of right 1.25mm pitch angle boxed PCB connectors and matching plugs in 2, 3, 4 and 5 way varieties. |
![CF0706 100mm (4](https://images.altronics.com.au/thb/c/CF0706.jpg) |
CF0706 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems - NO EXTERNAL EQ REQUIRED.
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
A surface mount fire speaker featuring flame retardant housing material and PA Driver to suit the new approval requirements. |
![C2186 165mm (6.5](https://images.altronics.com.au/thb/c/C2186.jpg) |
C2186 NEW
|
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts
- SPL 1W @ 1m: 91dB @ 1kHz ±2dB
- Freq response: 90Hz - 20kHz
- Grille: Steel
- Ceiling cutout: 195mm Ø
- Mounting depth: 100mm
- Terminal type: 2 way screw terminal
|
|
The C2186 is a 165mm (6.5") dual cone speaker with a 5W transformer. |
![CF2050W 10W 100V EWIS IP66 AS ISO7240.24 Fire PA Horn Speaker White](https://images.altronics.com.au/thb/c/CF2050W.jpg) |
CF2050W |
|
- Designed to meet AS ISO7240.24:2018 for fire/evac installations
- Requires no external EQ for AS ISO7240.24:2018 fire systems
- Twist lock cap reduces installation time
- UV stabilised ABS construction
- Excellent sound dispersion
- IP66 rated for weather resistance
- EWIS line monitoring system compatible
- Two cable glands supplied for loop in, loop out wiring
- Stainless steel mounting hardware
- 5 year warranty
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot horn speaker, designed to save installers time and money. |
![CF2050B 10W 100V EWIS IP66 AS ISO7240.24 Fire PA Horn Speaker Black](https://images.altronics.com.au/thb/c/CF2050B.jpg) |
CF2050B |
|
- Designed to meet AS ISO7240.24:2018 for fire/evac installations
- Requires no external EQ for AS ISO7240.24:2018 fire systems
- Twist lock cap reduces installation time
- UV stabilised ABS construction
- Excellent sound dispersion
- IP66 rated for weather resistance
- EWIS line monitoring system compatible
- Two cable glands supplied for loop in, loop out wiring
- Stainless steel mounting hardware
- 5 year warranty
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot horn speaker, designed to save installers time and money. |
![C0957A 40W 100V Line / 8 Ohm IP66 White Column Speaker](https://images.altronics.com.au/thb/c/C0957A.jpg) |
C0957A |
|
- Durable extruded aluminium housing.
- 22uf bipolar line monitoring capacitor
- Attractive slimline construction.
- Fitted with high specification drivers for exceptional speech & music reproduction.
- Suitable for accurate, “long throw” applications.
- Water protected to IEC529 IP66, suitable for indoor and outdoor use.
- Durable aluminium alloy multi bracket (tested up to 1500 kgf).
|
|
These stylish, compact 100V line column speakers utilise multiple 3.5” (89mm) woofers and high power dome tweeters to produce superb clarity for both music and speech applications |
![CF2050G 10W 100V EWIS IP66 AS ISO7240.24 Fire PA Horn Speaker](https://images.altronics.com.au/thb/c/CF2050G.jpg) |
CF2050G |
|
- Designed to meet AS ISO7240.24:2018 for fire/evac installations
- Requires no external EQ for AS ISO7240.24:2018 fire systems
- Twist lock cap reduces installation time
- UV stabilised ABS construction
- Excellent sound dispersion
- IP66 rated for weather resistance
- EWIS line monitoring system compatible
- Two cable glands supplied for loop in, loop out wiring
- Stainless steel mounting hardware
- 5 year warranty
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot horn speaker, designed to save installers time and money. |
![CF0705 100mm (4”) 100V 5W Surface Mount Speaker White AS ISO7240.24](https://images.altronics.com.au/thb/c/CF0705.jpg) |
CF0705 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems - NO EXTERNAL EQ REQUIRED.
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
A surface mount fire speaker featuring flame retardant housing material and PA Driver to suit the new approval requirements. |
![CF2238 200mm 100V 15W Ceiling EWIS Speaker White Metal Grille](https://images.altronics.com.au/thb/c/CF2238.jpg) |
CF2238 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Overall depth only 117mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2238 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. White metal grille finish. |
![C1060A 100V Line 40W Black Ball Pendant Ceiling Speaker](https://images.altronics.com.au/thb/c/C1060A.jpg) |
C1060A |
|
- 100V line or 8 Ohm operation
- Wide frequency response
- High speech intelligibility
- Fitted with 2m cable
- Stylish modern finish
- 6.5” coaxial speaker
- Ideal for BGM and paging requirements
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. |
![C2120B 200mm (8](https://images.altronics.com.au/thb/c/C2120B.jpg) |
C2120B |
|
- Power Taps : 1.25, 2.5, 5, 10, 15 Watts
- Frequency Response: 45Hz-20kHz
- Resonant Frequency: 50Hz
- SPL 1W @ 1m: 90dB @ 1KHz +/- 2dB.
- Terminal type: 4-way screw terminal & 22µF bipolar capacitor
- Tweeter Voice Coil Ø: 13mm
- Driver Voice Coil Ø: 25mm
- Ceiling cutout: 185mmØ
- Mounting depth: 94mm
- Transformer cover: No
- Cable restraint: No
|
|
For applications where high power, high performance sound reproduction is required, ie. bars, boutiques, clubs etc. Supplied with a 15W 100V transformer. |
![C1055A 30W 100V Line Ball Pendant Ceiling Speaker](https://images.altronics.com.au/thb/c/C1055A.jpg) |
C1055A |
|
- Power Taps: 8Ω, 10, 15, 20, 30W
- Impedance: 333Ω, 500Ω, 667Ω, 1kΩ & 8Ω
- SPL 1W @ 1m: 91dB
- SPL Full Power @ 1m: 106dB
- Freq. Resp.: 100Hz - 20kHz
- Weight: 3kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Overall Diam.: 260mm approx.
- IP Rating: IEC529 IP55
- Power Tap Cable Colours:
- Red: Common
- White: 30W
- Blue: 20W
- Yellow: 15W
- Green: 10W
- Brown: 8 Ohm
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
![C0604C 50mm 1.5W 8 Ohm Mylar Cone Speaker](https://images.altronics.com.au/thb/c/C0604B.jpg) |
C0604C |
|
- Sound Pressure Level: 85 ± 3 dBA
- Resonance Frequency: 800 ± 20% Hz
- Frequency Range: Fo - 7,000 Hz
- Rated Impedance: 8 ± 15% Ω
- RMS Power: 1.5W
- Max Power: 3.0W
- Operating Temperature: -20ºC to +60ºC
- Storage Temperature: -30ºC to +60ºC
- Distortion at 1KHZ at rated power: <5%
- Magnet: Ø12.5 x 2.0mm NdFeB
- Housing: Metal
- Diaphragm Material: Mylar
- Weight: 15.3g
- *Tested at 1m 1W, 800, 1k, 1.2k, 1.5kHz Average
|
|
Sound Pressure Level: 85 ± 3 dBA
Resonance Frequency: 800 ± 20% Hz
Frequency Range: Fo - 7,000 Hz
Rated Impedance: 8 ± 15% Ω
RMS Power: 1.5W
Max Power: 3.0W
Operating Temperature: -20ºC to +60ºC
Storage Temperature: -30ºC to +60ºC
Distortion at 1KHZ at rated power: <5%
Magnet: Ø12.5 x 2.0mm NdFeB
Housing: Metal
Diaphragm Material: Mylar
|
![C2261A 100mm 100V 5W Ceiling EWIS Speaker Black Metal Grille](https://images.altronics.com.au/thb/c/C2261A.jpg) |
C2261A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2261 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
![CF2234 200mm 100V 5W Ceiling EWIS Speaker White Metal Grille](https://images.altronics.com.au/thb/c/CF2234.jpg) |
CF2234 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Overall depth only 108mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2234 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. White metal grille finish. |
![C1006C 12” 2 Way 350W RMS Powered Club PA Speaker](https://images.altronics.com.au/thb/c/C1006C.jpg) |
C1006C |
|
- Rugged moulded ABS construction
- Inbuilt carry handle
- Top hat recess for stand mounting
- Ideal for small or large venues
- Ideal for DJs bands and hire companies
- Active design set up in seconds, just plug in an input and switch on
- Balanced XLR & 6.35mm input and XLR output
- Wide frequency range
- Daisy chain outputs for easy set up
|
|
This stylish compact speaker will make a great addition to any band/DJ set ups and entertainment venues where excellent quality, temporary sound is required. |
![C5160 Entertainer Portable Bluetooth Party Speaker & PA](https://images.altronics.com.au/thb/c/C5160.jpg) |
C5160
|
|
- User Friendly: Simple plug and play interface
- Bluetooth: Stream audio wirelessly from any bluetooth enabled device
- Power Source: Large 39.96Wh internal battery for long play times (6 to 8 hours at 80% volume)
- TWS: True wireless stereo pairing synchronize two speakers together to play the same music
- USB Port & Micro SD Card Slot: Access music stored on memory devices
- FM Radio: Digital FM tuner with auto scan
- Digital Recorder: Record music and spoken word applications directly onto your flash drive
- Wireless Microphone: Included in box, features volume & echo controls
- Mic Inputs: Microphone input with independent volume and echo controls
- Volume Control: Independant master volume, bass & treble controls
- AUX Input: Plug and play smart phones, tablets & MP3 players
- Party Lights: Exciting lighting effect with multiple colours
|
|
This Bluetooth party speaker and wireless mic PA system has been designed for outdoor or indoor entertaining with colour LED lighting for added party atmosphere. |
![C6115A 75W PA Compression Driver](https://images.altronics.com.au/thb/c/C6115A.jpg) |
C6115A |
|
- Rated power: 75W
- Throat Diameter: 25.4mm
- Impedance: 8 Ohm
- Power bandwidth: 1.0k-18kHz
- Sensitivity 1W @ 1m: 106dB
- Frequency Range: 1000~19kHz
- Minimum Impedance(Zmin): 5.8ohm
- Voice coil diameter: 51.2mm
|
|
For high power PA use. Incorporates industry standard mounting thread, aluminium voice coil former and titanium diaphragm. Standard 1" throat. |
![C0876A 165mm (6.5](https://images.altronics.com.au/thb/c/C0876A.jpg) |
C0876A |
|
|
|
These 165mm (6.5”) 2-Way bluetooth ceiling speakers feature identical kevlar construction to our popular C 0870 Wi-Fi speakers, this Bluetooth version offers instant audio streaming from your device with stunning audio reproduction. |
![H3320 Eye-bolt to suit Biema speakers](https://images.altronics.com.au/thb/h/H3320.jpg) |
H3320 |
|
|
|
eye bolt for rigging. Suits; C1023A, C1026A, C1029A and C1032A |
![C5059 Sound Bar With Wireless Subwoofer Package](https://images.altronics.com.au/thb/c/C5059.jpg) |
C5059 |
|
- 9m Bluetooth Distance
- Wall Mountable Sound Bar
- Subwoofer and sound bar package
- Wireless Subwoofer
- 140W Output Power
- Sleek design
- Cloth Grilles
|
|
Enhance your experience of TV, movies, music and games. Package of both soundbar and wireless subwoofer combine into a simple, sleek design with 140W output power. |
![C5064 Bookshelf Bluetooth 50W Speaker Pair Black](https://images.altronics.com.au/thb/c/C5064.jpg) |
C5064 |
|
- Stylish MDF Construction
- Compact Sleek Design
- USB Connection
- Combined power of 50W
- Digital Signal Processing
- 10m Bluetooth distance
|
|
The speakers are equipped with digital signal processing (DSP) and dynamic range control (DRC) to prevent distortion. |
![C2161A 100mm 100V 5W Ceiling EWIS Speaker Black Grille](https://images.altronics.com.au/thb/c/C2161A.jpg) |
C2161A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2161 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
![C2260A 100mm 100V 5W Ceiling EWIS Speaker White Metal Grille](https://images.altronics.com.au/thb/c/C2260A.jpg) |
C2260A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2260 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
![CF2135 200mm 100V 5W Ceiling EWIS Speaker Black Grille](https://images.altronics.com.au/thb/c/CF2135.jpg) |
CF2135 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Design is only 108mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2135 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. |
![C0951A 20W 100V Line / 4 Ohm IP66 White Column Speaker](https://images.altronics.com.au/thb/c/C0951A.jpg) |
C0951A |
|
- Durable extruded aluminium housing.
- 22uf bipolar line monitoring capacitor
- Attractive slimline construction.
- Fitted with high specification drivers for exceptional speech & music reproduction.
- Suitable for accurate, “long throw” applications.
- Water protected to IEC529 IP66, suitable for indoor and outdoor use.
- Durable aluminium alloy multi bracket (tested up to 1500 kgf).
|
|
Now fitted with 22uF bipolar capacitor for line monitoring use. These stylish, compact column speakers utilise multiple 3.5" (89mm) woofers and high power dome tweeters to produce superb clarity for both music and speech applications. |
![CF2134 200mm 100V 5W Ceiling EWIS Speaker White Grille](https://images.altronics.com.au/thb/c/CF2142.jpg) |
CF2134 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Design is only 108mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2134 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. |
![CF2142 200mm 100V 15W Ceiling EWIS Speaker White Grille](https://images.altronics.com.au/thb/c/CF2142.jpg) |
CF2142 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Design is only 108mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2142 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. |
![C1032A 2 Way 12](https://images.altronics.com.au/thb/c/C1032A.jpg) |
C1032A |
|
- Frequency Response: 55Hz - 18KHz
- Driver: BML-T1202; BMH-A4
- Impedance: 8 ohm
- Directivity Angle: H90°x V60°
- Power: 200W RMS
- Sensitivity: 95dB
- Maximum SPL: 118dB (continuous) 124dB (peak)
- Connector: 2xNL4R
- Dimensions: 375W x 360D x 610Hmm
- Weight: 23kg
|
|
This 2 Way 300mm (12") 150W PA Pro Speaker Pair is part of a new series by Biema. This new range has been engineered using the most advanced acoustic design software. The cabinets trapezoidal shape allows installation as a floor mount foldback configuration or on a speaker stand utilising the 35mm top hat recess in the base. |
![C0993A 254mm 10](https://images.altronics.com.au/thb/c/C0993A.jpg) |
C0993A |
|
- Rugged moulded ABS construction
- Standard magnet-driven woofer for low distortion
- High performance large voice-coil diameter
- Wide frequency response
- Titanium diaphragm compression driver
- 4 inbuilt rigging points allow the units to be suspended using eye bolts
- Inbuilt top hat mount and carry handle
- Mic Level input <5mV, Line Output 250mV
|
|
This 10 Inch 2 Way Powered PA Speaker with MP3/Bluetooth/FM/USB is housed in rugged wedge shaped nylon fibre and ABS moulded cabinet. Designed with portability in mind the cabinets include an inbuilt carry handle. |
![C0991A 200mm 8](https://images.altronics.com.au/thb/c/C0991A.jpg) |
C0991A |
|
- Bluetooth audio
- FM radio
- USB playback
- Rugged moulded ABS construction
- Standard magnet-driven woofer for low distortion
- High performance large voice-coil diameter
- Wide frequency response
- Titanium diaphragm compression driver
- 4 inbuilt rigging points allow the units to be suspended using eye bolts
- Inbuilt top hat mount and carry handle
- Mic Level input <5mV, Line Output 250mV
|
|
This 200mm 8 Inch 2 Way Powered PA Speaker MP3/BT/FM/USB is housed in rugged wedge shaped nylon fibre and ABS moulded cabinet. |
![C1029A 2 Way 10](https://images.altronics.com.au/thb/c/C1029A.jpg) |
C1029A |
|
- Frequency Response: 65Hz - 18KHz
- Driver: BML-T1002; BMH-A3
- Impedance: 8 ohm
- Directivity Angle: H100°x V80°
- Power: 150W RMS
- Sensitivity: 94dB
- Maximum SPL: 116dB (continuous) 122dB (peak)
- Connector: 2xNL4R
- Dimensions: 330W x 315D x 530Hmm
- Weight: 16kg
|
|
This 8&ampquot 75W PA Pro Speaker Pair is part of a new series by Biema. This new range has been engineered using the most advanced acoustic design software. |
![C1026A 2 Way 8](https://images.altronics.com.au/thb/c/C1026A.jpg) |
C1026A |
|
- Frequency Response: 65Hz - 18KHz
- Driver: BML-T804; BMH-V270
- Impedance: 8 ohm
- Directivity Angle: H100°x V80°
- Power: 75W RMS
- Sensitivity: 93dB
- Maximum SPL: 112dB (continuous) 118dB (peak)
- Connector: 2xNL4R
- Dimensions: 285W x 270D x 455Hmm
- Weight: 9.8kg
|
|
This 200mm (8") 75W PA Pro Speaker Pair is part of a new series by Biema. This new range has been engineered using the most advanced acoustic design software. |
![C1023A 2 Way 8](https://images.altronics.com.au/thb/c/C1023A.jpg) |
C1023A |
|
- High power handling.
- All wooden trapezoidal cabinetry.
- Designed in the USA.
- Suitable for foldback use, speaker stand or permanent wall mounting.
- Hard wearing stippled finish with steel grille.
- Speakon loop output.
- Multiple rigging points for 8mm eyebolts.
- Sold in matching pairs.
|
|
This 8" 75W Coaxial PA Pro Speaker Pair is part of a new series by Biema. This new range has been engineered using the most advanced acoustic design software. |
![C2184 200mm (8](https://images.altronics.com.au/thb/c/C2184.jpg) |
C2184 |
|
- Size: 200mm
- Colour: White
- Speaker Type: 100V line twin cone
- Grille: Steel
- Power Taps (Watts): 0.33, 0.66, 1.25, 2, 5W
- Frequency Response: 100Hz - 15kHz
- SPL 1W@1m: 89dB
- Terminal Type: 4 way screw terminal block & 22µF bipolar capacitor
- Ceiling Cutout: 250mmØ
- Mounting Depth: 77mm
|
|
This speaker is a stylish, high performance, architecturally unobtrusive speaker/grille combination which can be painted to match decor. It also features a magnetic fit "edge to edge" steel grille for a near flush finish |
![C2181 200mm (8](https://images.altronics.com.au/thb/c/C2181.jpg) |
C2181 |
|
- Magnetic fit ‘edge to edge’ steel grille for a neat flush finish.
- High power output.
- Excellent speech intelligibility and music reproduction.
- Coaxial driver for excellent high end frequency response.
- Flip-lock mounting system reduces installation time.
- 5 year warranty.
|
|
The C 2181 is a 200mm (8") 8 amp Omega 45W coaxial speaker. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a "Flip-Lock&" mounting system. Typical applications |
![C2179 165mm (6.5](https://images.altronics.com.au/thb/c/C2179.jpg) |
C2179 |
|
- Size: 165mm
- Colour: White
- Speaker Type: 8 Ohm Coaxial
- Grille: Steel
- Power Taps (Watts): 30W
- Frequency Resp: 65Hz - 20kHz
- SPL 1W@1m: 90dB
- Cutout: 195Ø
|
|
Stylish, high performance, architecturally unobtrusive speaker/grille combinations which can be painted to match decor. Super easy to install. |
![C0699A Surface Mount Speaker Install Bracket](https://images.altronics.com.au/thb/c/C0699A.jpg) |
C0699A |
|
|
|
The install bracket as used with C 0703A/4A "OneShot" Surface Mount speakers. |
![C0704A 100mm 5W 100V Black One-Shot Surface Mount PA Speaker](https://images.altronics.com.au/thb/c/C0704.jpg) |
C0704A |
|
- Power taps: 0.33, 0.66, 1.25, 2.5 and 5W
- SPL 1W @ 1m: 90dB
- Freq. Resp.: 100Hz-20kKz
- Connection: 4 way wire protect terminal + 22uF bipolar cap
- Overall Dimensions: 220mmØ x 72mm high.
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super Fast Installation. Save Time & Money! Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs. |
![C0703A 100mm 5W 100V White One-Shot Surface Mount PA Speaker](https://images.altronics.com.au/thb/c/C0701.jpg) |
C0703A |
|
- Power taps: 0.33, 0.66, 1.25, 2.5 and 5W
- SPL 1W @ 1m: 90dB
- Freq. Resp.: 100Hz-20kKz
- Connection: 4 way wire protect terminal + 22uF bipolar cap
- Overall Dimensions: 220mmØ x 72mm high.
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
Super Fast Installation. Save Time & Money! Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs. |
![C5220 10](https://images.altronics.com.au/thb/c/C5220.jpg) |
C5220 |
|
- Rated power: 150W @ 4Ω
- SPL 1W @ 1m:86dB
- Max SPL:108dB
- Freq response:50Hz - 300Hz
- Weight: 12kg
- Dimensions (mm): 310H x 420Ømm
|
|
You may locate C 5220 anywhere you can run speaker wire. |
![C2160A 100mm 100V 5W Ceiling EWIS Speaker White Grille](https://images.altronics.com.au/thb/c/C2160A.jpg) |
C2160A |
|
- Designed to meet Australian Standard AS ISO7240.24
- Press to fit rubber push through grommet.
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Version of C 2160 with rubber grommets instead of cable glands. Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. |
![CB2134VC 200mm (8](https://images.altronics.com.au/thb/c/CB2134VC.jpg) |
CB2134VC |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency Response: 75Hz- 15kHz
- SPL (1W @ 1M): 93dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 4 way terminal block + 22uf bipolar capacitor
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. |
![C1066 Ceiling Speaker Support Bridge to suit C1065 Subwoofer](https://images.altronics.com.au/thb/c/C1066.jpg) |
C1066 |
|
|
|
Designed to be installed with the C1065 subwoofer, this bridge supports the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the "T-bars" for maximum support for the tile. Recommended for use with mineral fibre. |
![C0614B 66mm 2W 8 Ohm Mylar Cone Speaker](https://images.altronics.com.au/thb/c/C0614B.jpg) |
C0614B |
|
- Sound Pressure Level: 89±2 dBA*
- Resonance Frequency (Fo): 300±20% Hz
- Frequency Range: Fo - 10,000 Hz
- Rated Impedance: 8±15% Ω
- Rated Power: 1.0 W
- Max. Power: 2.0 W
- Magnet: Ø32 x Ø18 x 6 mm Ferrite
- Operating Temperature: -20ºC to 60ºC
- Storage Temperature: -30ºC to 70ºC
- Housing: Metal, 66mm x 66mm
- Depth: 20mm
- Diaphragm Material: Mylar
- Weight: 60g
- * Tested at 0.5m, 1W, 500, 600, 1kHz Average.
|
|
Sound Pressure Level: 89±2 dBA*
Resonance Frequency (Fo): 300±20% Hz
Frequency Range: Fo - 10,000 Hz
Rated Impedance: 8±15% &#937
Rated Power: 1.0 W
Max. Power: 2.0 W
Magnet: Ø32 x Ø18 x 6 mm Ferrite
Operating Temperature: -20ºC to 60ºC
Storage Temperature: -30ºC to 70ºC
Housing: Metal, 66mm |
![C5210 Floor Standing 100W Subwoofer 8 Ohm/100V](https://images.altronics.com.au/thb/c/C5210.jpg) |
C5210 |
|
- Rated power: 100W @ 8Ω
- Power taps: 100W
- Max SPL: 98dB
- Freq response: 55Hz - 15Khz
- Weight: 5kg
- Dimensions (mm): 260W x 320D x 340H
|
|
A high quality commercial grade passive 8" subwoofer for use with either 100V line PA amplifiers or low impedance 4 - 8 Ohm amplifiers. This sub provides additional low end response to foreground music and hi-fi applications. |
![C1065 Ceiling Mount 240W Subwoofer 4 Ohm/100V](https://images.altronics.com.au/thb/c/C1065.jpg) |
C1065 |
|
- Rated power: 240W @ 4Ω
- Power taps: 60, 120, 240W
- Max SPL: 112dB
- Freq response: 30Hz - 15Khz
- Weight: 7.5kg
- Dimensions (mm): 367 x 330Dmm
|
|
High power commercial grade 10" subwoofer for providing additional low end response to foreground music and hi-fi applications. |
![C2117B High Output 15W 100V 200mm (8”) PA Speaker](https://images.altronics.com.au/thb/c/C2117B.jpg) |
C2117B |
|
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Terminal type: 4 way screw terminal & 22µF bipolar cap
- Ceiling cutout: 185mm Ø
- Mounting depth: 75mm
- Transformer cover: No
- Cable restraint: No
|
|
Specifically engineered for use in PA and fire evacuation systems where a high level of SPL and speech intelligibility is essential.
|
![C2165 Ceiling Tile Bridge to suit 3 Clip Fire Rated One-Shot Speakers](https://images.altronics.com.au/thb/c/C2165.jpg) |
C2165 |
|
- Overall Dimensions: 590 mm x 155 mm
- Hole Diameter: 140 mm
|
|
Designed to be installed with the One-Shot ceiling speakers, these pans support the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the "T-bars" for maximum support for the tile. Recommended for use with mineral fibre |
![C2161 100mm 100V 5W Ceiling EWIS Speaker Black Grille](https://images.altronics.com.au/thb/c/C2161.jpg) |
C2161 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2171. At only 65mm overall height, these models are ideal for low profile ceiling spaces. It features flame retardent housing material, sealed cable gland entries and a tuned PA driver to suit the new approval requirements. |
![C2160 100mm 100V 5W Ceiling EWIS Speaker White Grille](https://images.altronics.com.au/thb/c/C2160.jpg) |
C2160 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Low profile design is only 65mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. A lower profile version of the C 2170. At only 65mm overall height, these models are ideal for low profile ceiling spaces. It features flame retardent housing material, sealed cable gland entries and a tuned PA driver to suit the new approval requirements. |
![C2261 100mm 100V 5W Ceiling EWIS Speaker Black Metal Grille](https://images.altronics.com.au/thb/c/C2261.jpg) |
C2261 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- Black RAL9004 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. |
![C0854 165mm 30W Stereo Input Ceiling Speaker](https://images.altronics.com.au/thb/c/C0854.jpg) |
C0854 |
|
- Impedance: 8Ω
- Rated power: 30W RMS
- Max power: 50W
- SPL 1W @ 1m: 90dB
- Freq response: 60Hz - 20kHz
- Weight: 1.3kg
- Mounting hole size (mm): 190Ø
- Dimensions (mm): 230Ø x 90D
|
|
This dual input ''stereo summing'' speaker is engineered to provide stereo imaging from a single speaker unit. It is used where a confined space makes installing two seperate left and right channel speakers impractical. It features +3dB bass and treble boost switches for preferential sound tailoring. |
![C1008C 380mm 15](https://images.altronics.com.au/thb/c/C1008C.jpg) |
C1008C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via SpeakOn. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
![C1004C 300mm 12](https://images.altronics.com.au/thb/c/C1004C.jpg) |
C1004C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
![C1000C 254mm 10](https://images.altronics.com.au/thb/c/C1000C.jpg) |
C1000C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
![C0996C 200mm 8 Inch 200W Two Way PA Speaker](https://images.altronics.com.au/thb/c/C0996C.jpg) |
C0996C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
![C3623A 82 x 58mm Plastic Speaker Box Corner](https://images.altronics.com.au/thb/c/C3623.jpg) |
C3623A |
|
|
|
Protect your speaker cabinets with these quality corners Simply screws over the cabinet. Requires no cutting. |
![CF0720 15W 100V 200mm (8”) Fire Speaker White AS ISO7240.24](https://images.altronics.com.au/thb/c/CF0720.jpg) |
CF0720 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact fire retardant enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
![CF0716 5W 100V 200mm (8”) Fire Speaker Black AS ISO7240.24](https://images.altronics.com.au/thb/c/CF0716.jpg) |
CF0716 |
|
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 93dB (1W@1M), 81dB (1W@4M)
- Maximum Sound Pressure Level: 101dB (5W@1M), 89dB (5W@4M)
- Frequency Response: 100 Hz - 15kHz; 500 - 4kHz O 8dB
- Coverage Angle (-6dB): 500 Hz: > 180 o , 1000Hz: 81o , 2000Hz: 93o , 4000Hz: 58o
- Environmental Type: A (for indoor applications as per standard)
- Speaker Component: 200mm (8”) paper cone speaker
- Mounting Method: Surface Attachment
- Line Monitoring: Yes, 22μF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Finish:
- Black ABS grille and housing (Starex VH-0800)
- Black Flame retardant ABS spring clips (Cycoloy C2950HF)
- IP Rating: IP 21C
- Dimensions: 310Ø x 85mm
- Weight: 1.36kg
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
![CF0715 5W 100V 200mm (8”) Fire Speaker White AS ISO7240.24](https://images.altronics.com.au/thb/c/CF0715.jpg) |
CF0715 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact fire retardant enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
![CF0704 5W 100V 100mm (4”) Fire Speaker Black AS ISO7240.24](https://images.altronics.com.au/thb/c/CF0704.jpg) |
CF0704 |
|
- Electrical
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 88dB (1W @ 1m), 76dB (1W @ 4m)
- Maximum Sound Pressure Level: 95dB (5W @ 1m), 83dB (5W @ 4m)
- Frequency Response: 100Hz – 15kHz
- Coverage Angle (-6dB): 1000Hz: 140°, 2000Hz: 105°, 4000Hz 80°
- Environmental Type: A (for indoor applications as per standard)
- Line Monitoring: Yes, 22µF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Mechanical
- Speaker Component: 100mm (4”) paper cone speaker
- Material:
- Black flame retardant ABS grille and housing (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Mounting Method: Surface Attachment
- IP Rating: IP 21C
- Dimensions: 210Ø x 67mm
- Weight: 0.81kg
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- Additional Installation Accessories
- C 0699 Conduit mounting plate
|
|
Designed to meet AS ISO7240.24:2018*. Fire version of our popular One-Shot C 0703 speaker. It features flame retardent housing material and a tuned PA driver to suit the new approval requirements. One-Shot design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably. |
![CF0703 5W 100V 100mm (4”) Fire Speaker White AS ISO7240.24](https://images.altronics.com.au/thb/c/CF0703.jpg) |
CF0703 |
|
- Electrical
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 88dB (1W @ 1m), 76dB (1W @ 4m)
- Maximum Sound Pressure Level: 95dB (5W @ 1m), 83dB (5W @ 4m)
- Frequency Response: 100Hz – 15kHz
- Coverage Angle (-6dB): 1000Hz: 140°, 2000Hz: 105°, 4000Hz 80°
- Environmental Type: A (for indoor applications as per standard)
- Line Monitoring: Yes, 22µF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Mechanical
- Speaker Component: 100mm (4”) paper cone speaker
- Material:
- White flame retardant ABS grille and housing (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Mounting Method: Surface Attachment
- IP Rating: IP 21C
- Dimensions: 210Ø x 67mm
- Weight: 0.81kg
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- Additional Installation Accessories
- C 0699 Conduit mounting plate
|
|
Designed to meet AS ISO7240.24:2018*. Fire version of our popular One-Shot C 0703 speaker. It features flame retardent housing material and a tuned PA driver to suit the new approval requirements. One-Shot design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably. |
![C2260 100mm 100V 5W Ceiling EWIS Speaker White Metal Grille](https://images.altronics.com.au/thb/c/C2260.jpg) |
C2260 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Stylish finish with rust free aluminium grille.
- White RAL9003 mesh grille.
- Low profile design is only 65mm deep - penetrates ceiling by only 53mm (with 12mm thickness ceiling tile).
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot speaker with a aluminium grille, this model has been designed for installations requiring a premium finish whilst still meeting the required fire standards. It can also be used for standard 100V PA/BGM installations. |
![C2172 100mm 100V 10W Ceiling EWIS Speaker White Plastic Grille](https://images.altronics.com.au/thb/c/C2172.jpg) |
C2172 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
![C2070 Compact 30W Weatherproof 100V Line Music Horn](https://images.altronics.com.au/thb/c/C2070.jpg) |
C2070 |
|
- Power rating: 30W RMS
- Power taps (100V): 15 & 30W
- SPL 1W @ 1m: 100dB
- SPL Max @ 1m: 115dB
- Frequency response: 130Hz - 18kHz
- Dimensions: ≈360W x 165H x 275D mm
- Colour: Grey
- Weight: ≈3.1kg
- Connection details:
- Black Common
- White 30W tap (330 ohms)
- Green 15W tap (670 ohms)
|
|
A high performance weatherproof music horn for use in installations requiring a high output speaker for BGM programming and paging playback. |
![C2157 100mm (4](https://images.altronics.com.au/thb/c/C2157.jpg) |
C2157 |
|
- Power taps: 0.66, 1.25, 2.5, 5, 10W
- Frequency Response: 100Hz- 15kHz
- SPL 1W @ 1M: 94dB (+/- 2dB)
- Size: 100mm
- Hole Cutout (Ø): 140mm
- Connection: 4 way terminal block
- Colour: White
|
|
Redback "One-Shot" speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. |
![C2171 100mm 100V 5W Ceiling EWIS Speaker Black Plastic Grille](https://images.altronics.com.au/thb/c/C2171.jpg) |
C2171 |
|
- Electrical
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
- SPL 1W @ 1m: 90dB
- SPL 1W @ 4m: 78dB
- SPL 5W @ 1m: 97dB
- SPL 5W @ 4m: 85dB
- Frequency response: 100Hz-15kHz
- Coverage Angles: 1000Hz 182°, 2000Hz 163°, 4000Hz 77°
- Connection: 4 way terminal block + 22uF bipolar capacitor
- Approval: AS ISO7240.24
- Environmental Type: A (for indoor applications)
- SPL by tappings @ 1m
- 0.33W: 85.2dB
- 0.66W: 88.2dB
- 1.25W: 91.2dB
- 2.5W: 94dB
- 5W: 97dB
- Mechanical
- Material:
- Black flame retardant ABS grille (Taitalac 8540T)
- Black flame retardant ABS spring clips (Cycoloy C2950HF)
- Red flame retardant ABS transformer dome cover (Starex VH-0800)
- Driver construction: Paper cone
- Ceiling cutout: 140mmØ
- Grille diameter: 159mmØ
- Mounting depth: 117mm (including ceiling tile thickness)
- Overall weight: 700g
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- IP Rating: IP21
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
![C2170 100mm 100V 5W Ceiling EWIS Speaker White Plastic Grille](https://images.altronics.com.au/thb/c/C2170.jpg) |
C2170 |
|
- Electrical
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Impedance: 30kΩ, 15kΩ, 8kΩ, 4kΩ, 2kΩ
- SPL 1W @ 1m: 90dB
- SPL 1W @ 4m: 78dB
- SPL 5W @ 1m: 97dB
- SPL 5W @ 4m: 85dB
- Frequency response: 100Hz-15kHz
- Coverage Angles: 1000Hz 182°, 2000Hz 163°, 4000Hz 77°
- Connection: 4 way terminal block + 22uF bipolar capacitor
- Approval: AS ISO7240.24
- Environmental Type: A (for indoor applications)
- SPL by tappings @ 1m
- 0.33W: 85.2dB
- 0.66W: 88.2dB
- 1.25W: 91.2dB
- 2.5W: 94dB
- 5W: 97dB
- Mechanical
- Material:
- White flame retardant ABS grille (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Red flame retardant ABS transformer dome cover (Starex VH-0800)
- Driver construction: Paper cone
- Ceiling cutout: 140mmØ
- Grille diameter: 159mmØ
- Mounting depth: 117mm (including ceiling tile thickness)
- Overall weight: 700g
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- IP Rating: IP21
|
|
Designed to meet AS ISO 7240.24:2018. Considerable development and has been put into this fire announcement system approved version of our popular One-Shot 'Rat-Trap' speaker. Flame retardent design with tuned PA driver to suit the latest approval requirements. |
![C1058 30W 100V Line Pendant Ceiling Speaker Black](https://images.altronics.com.au/thb/c/C1058.jpg) |
C1058
|
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Dimensions: Ø185mm x 230mm
- IP Rating: IP45
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
![C0994 250mm 10 Inch 2 Way Powered PA Speaker With MP3/USB](https://images.altronics.com.au/thb/c/C0994.jpg) |
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
![C0995 300mm 12 Inch 2 Way Powered PA Speaker With MP3/USB](https://images.altronics.com.au/thb/c/C0995.jpg) |
C0995 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
![C2060 10W 100V EWIS IP66 Black Plastic Horn PA Speaker](https://images.altronics.com.au/thb/c/C2060.jpg) |
C2060 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Based on the popular C 2050 Redback horn speaker this all new release has been developed to offer similar performance at a substantially reduced price. A compact PA horn speaker with installation time saving features patented by Redback. Ideal for general paging and public address system needs, this horn offers excellent performance in a compact pa |
![C2115 200mm (8](https://images.altronics.com.au/thb/c/C2115.jpg) |
C2115 |
|
- Driver model: C 2117A
- Power taps: 1.25, 2, 5, 10, 15W
- SPL 1W @ 1m: 95dB
- Freq. response: 80Hz - 12kHz
- Terminal type: 4 way screw terminal block and 22uF bipolar capacitor.
- Grill Type: Aluminium
- Mounting hole: 238mmØ
- Mounting depth: 88mm
|
|
The C 2115 is a 200mm (8") high power paper cone speaker fitted with a 15W 100V line transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a ''Flip-Lock'' mounting system. |
![C2051 10W 100V EWIS IP66 White Plastic PA Horn Speaker](https://images.altronics.com.au/thb/c/C2051.jpg) |
C2051 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Exclusive design incorporates a dog leg mounting bracket which eliminates the need to separate the horn from the bracket during installation. A real time & money saver! Traditional horn speaker brackets have to be removed, screwed to the wall surface, and then bolted back onto the horn speaker. |
![C2050 10W 100V EWIS IP66 Grey Plastic PA Horn Speaker](https://images.altronics.com.au/thb/c/C2050.jpg) |
C2050 |
|
- Power taps: 1.25, 2.5, 5, 7.5, 10W
- SPL 1W @ 1m: 104dB @ 1kHz (+/- 2dB)
- SPL Max Tap @ 1m: 114dB @ 1kHz (+/- 2dB)
- Frequency response: 340Hz-10kHz
- Connection: 4 core fly lead
- EWIS line monitoring: 22uF bipolar capacitor fitted
- Dispersion angle @ 1kHz: 160° vertical, 130° horizontal
- Driver construction: Aluminium voice coil former
- Mounting depth: 255mm
- Overall weight: 1.2kg
- Operating temperature: -20°C to +55°C
- Relative humidity: < 95%
|
|
Exclusive design incorporates a dog leg mounting bracket which eliminates the need to separate the horn from the bracket during installation. A real time & money saver! Traditional horn speaker brackets have to be removed, screwed to the wall surface, and then bolted back onto the horn speaker. |
![C0721 200mm 15W 100V Black One-Shot Surface Mount EWIS Speaker](https://images.altronics.com.au/thb/c/C0721.jpg) |
C0721 |
|
- Power rating: 15 watts
- Power taps: 1.25, 2.5, 5, 10, 15 watts
- SPL 1W @ 1m: 95dB @ 1kHz ±2dB
- Freq response: 80Hz- 12kHz
- Connection: 4 way wire protect terminal & 22uF bipolar cap
- Dimensions: 310Ø x 85Hmm.
|
|
Super Fast Installation. Save Time & Money!
Saving valuable installation time the innovative One-Shot range is moulded from industrial grade, high impact polystyrene and designed to mount directly to the underside of concrete slabs or inacce |