|
Description |
Downloads |
Specs |
Ordering |
|
 |
C5220 |
|
- Rated power: 150W @ 4Ω
- SPL 1W @ 1m:86dB
- Max SPL:108dB
- Freq response:50Hz - 300Hz
- Weight: 12kg
- Dimensions (mm): 310H x 420Ømm
|
|
You may locate C 5220 anywhere you can run speaker wire. |
 |
C6110 |
|
- Rated power: 30W RMS
- Max power: 60W
- Impedance: 8Ω
- Freq response: 1.5kHz-20kHz
- Sensitivity 1W @ 1m: 103dB
- Voice coil diameter: 34.5mm
- Magnet weight: 567g
|
|
This super-high efficiency compression driver is perfect for PA use. |
 |
C6115 |
|
- Rated power: 75W
- Max power: 150W
- Impedance: 8 Ohm
- Freq response: 800Hz-20kHz
- Sensitivity 1W @ 1m: 110dB
- Voice coil diameter: 51.2mm
- Magnet weight: 1132g
|
|
For high power PA use. Incorporates industry standard mounting thread, aluminium voice coil former and titanium diaphragm. |
 |
C6115A |
|
- Rated power: 75W
- Throat Diameter: 25.4mm
- Impedance: 8 Ohm
- Power bandwidth: 1.0k-18kHz
- Sensitivity 1W @ 1m: 106dB
- Frequency Range: 1000~19kHz
- Minimum Impedance(Zmin): 5.8ohm
- Voice coil diameter: 51.2mm
|
|
For high power PA use. Incorporates industry standard mounting thread, aluminium voice coil former and titanium diaphragm. Standard 1" throat. |
 |
C6127 |
|
|
|
Standard 1" threaded round flare. |
 |
CB2098 |
|
|
|
Modelled on the popular Redback "One-Shot" design, the "rat trap" uses an ingenious patented spring mechanism that snaps like a rat trap when activated. Includes three retaining clips ensuring the grille fits snugly to the ceiling without sagging or drooping. |
 |
CB2134VC |
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5W
- Frequency Response: 75Hz- 15kHz
- SPL (1W @ 1M): 93dB
- Size: 200mm
- Hole Cutout (Ø): 246mm
- Connection: 4 way terminal block + 22uf bipolar capacitor
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
An 8" 200mm One-Shot 100V line PA speaker fitted with a volume control in the middle of the grille. Ideal for use in areas where local volume needs to be lower or higher than the overall zone volume level. |
 |
CC2099 |
|
- Power taps: 0.33, 0.66, 1.25 , 2.5, 5W
- SPL 1W @ 1m: 92dB @ 1KHz ±2dB
- Freq response: 100Hz - 15kHz
- Ceiling cutout: 140mm Ø
- Note: All SPL figures are measured at 1KHz +/- 2dB.
|
|
This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility; which is h |
 |
CF0703 |
|
- Electrical
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 88dB (1W @ 1m), 76dB (1W @ 4m)
- Maximum Sound Pressure Level: 95dB (5W @ 1m), 83dB (5W @ 4m)
- Frequency Response: 100Hz – 15kHz
- Coverage Angle (-6dB): 1000Hz: 140°, 2000Hz: 105°, 4000Hz 80°
- Environmental Type: A (for indoor applications as per standard)
- Line Monitoring: Yes, 22µF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Mechanical
- Speaker Component: 100mm (4”) paper cone speaker
- Material:
- White flame retardant ABS grille and housing (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Mounting Method: Surface Attachment
- IP Rating: IP 21C
- Dimensions: 210Ø x 67mm
- Weight: 0.81kg
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- Additional Installation Accessories
- C 0699 Conduit mounting plate
|
|
Designed to meet AS ISO7240.24:2018*. Fire version of our popular One-Shot C 0703 speaker. It features flame retardent housing material and a tuned PA driver to suit the new approval requirements. One-Shot design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably. |
 |
CF0704 |
|
- Electrical
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 88dB (1W @ 1m), 76dB (1W @ 4m)
- Maximum Sound Pressure Level: 95dB (5W @ 1m), 83dB (5W @ 4m)
- Frequency Response: 100Hz – 15kHz
- Coverage Angle (-6dB): 1000Hz: 140°, 2000Hz: 105°, 4000Hz 80°
- Environmental Type: A (for indoor applications as per standard)
- Line Monitoring: Yes, 22µF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Mechanical
- Speaker Component: 100mm (4”) paper cone speaker
- Material:
- Black flame retardant ABS grille and housing (Taitalac 8540T)
- Clear Flame retardant ABS spring clips (Makrolon 6557)
- Mounting Method: Surface Attachment
- IP Rating: IP 21C
- Dimensions: 210Ø x 67mm
- Weight: 0.81kg
- Environmental
- Operating temperature: -25°C to +55°C
- Relative humidity: < 95%
- Additional Installation Accessories
- C 0699 Conduit mounting plate
|
|
Designed to meet AS ISO7240.24:2018*. Fire version of our popular One-Shot C 0703 speaker. It features flame retardent housing material and a tuned PA driver to suit the new approval requirements. One-Shot design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably. |
 |
CF0705 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems - NO EXTERNAL EQ REQUIRED.
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
A surface mount fire speaker featuring flame retardant housing material and PA Driver to suit the new approval requirements. |
 |
CF0706 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems - NO EXTERNAL EQ REQUIRED.
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
A surface mount fire speaker featuring flame retardant housing material and PA Driver to suit the new approval requirements. |
 |
CF0715 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact fire retardant enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
 |
CF0716 |
|
- Rated Noise Power: 5 Watts (100V line)
- Power Taps & Impedance (100V line): 0.33W (30kΩ), 0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
- Sensitivity: 93dB (1W@1M), 81dB (1W@4M)
- Maximum Sound Pressure Level: 101dB (5W@1M), 89dB (5W@4M)
- Frequency Response: 100 Hz - 15kHz; 500 - 4kHz O 8dB
- Coverage Angle (-6dB): 500 Hz: > 180 o , 1000Hz: 81o , 2000Hz: 93o , 4000Hz: 58o
- Environmental Type: A (for indoor applications as per standard)
- Speaker Component: 200mm (8”) paper cone speaker
- Mounting Method: Surface Attachment
- Line Monitoring: Yes, 22μF bipolar capacitor
- Applicable Cable: 2.5mm2 (14AWG) max conductor area
- Connection: 4 way screw terminal
- Finish:
- Black ABS grille and housing (Starex VH-0800)
- Black Flame retardant ABS spring clips (Cycoloy C2950HF)
- IP Rating: IP 21C
- Dimensions: 310Ø x 85mm
- Weight: 1.36kg
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
 |
CF0720 |
|
- Designed to meet AS ISO7240.24 standard for fire & evacuation warning systems
- Excellent speech intelligibility
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact fire retardant enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
|
|
The re & evacuation safety standard has changed to AS ISO 7240.24: 2018. This new standard will be implemented in new building projects. Redback is releasing this new range of horn and ceiling speakers to meet this standard to ensure re & evacuation installations in new buildings meet the required code. |
 |
CF1520B |
|
- Requires no external equalisation to meet AS ISO7240
- Weather resistant
- Durable powder coated mounting bracket
- Stainless steel fixings
- Flame retardent
- Designed to meet AS ISO7240.24 for fire & evacuation installations
|
|
Approved for use in fire & evacuation systems in Australia (AS ISO 7240.24:2018). Our first One-Shot sound projector, designed to save installers time and money. |
 |
CF1520G |
|
- Requires no external equalisation to meet AS ISO7240
- Weather resistant
- Durable powder coated mounting bracket
- Stainless steel fixings
- Flame retardent
- Designed to meet AS ISO7240.24 for fire & evacuation installations
|
|
Approved for use in fire & evacuation systems in Australia (AS ISO 7240.24:2018). Our first One-Shot sound projector, designed to save installers time and money. |
 |
CF1520W |
|
- Requires no external equalisation to meet AS ISO7240
- Weather resistant
- Durable powder coated mounting bracket
- Stainless steel fixings
- Flame retardent
- Designed to meet AS ISO7240.24 for fire & evacuation installations
|
|
Approved for use in fire & evacuation systems in Australia (AS ISO 7240.24:2018). Our first One-Shot sound projector, designed to save installers time and money. |
 |
CF2050B |
|
- Designed to meet AS ISO7240.24:2018 for fire/evac installations
- Requires no external EQ for AS ISO7240.24:2018 fire systems
- Twist lock cap reduces installation time
- UV stabilised ABS construction
- Excellent sound dispersion
- IP66 rated for weather resistance
- EWIS line monitoring system compatible
- Two cable glands supplied for loop in, loop out wiring
- Stainless steel mounting hardware
- 5 year warranty
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot horn speaker, designed to save installers time and money. |
 |
CF2050G |
|
- Designed to meet AS ISO7240.24:2018 for fire/evac installations
- Requires no external EQ for AS ISO7240.24:2018 fire systems
- Twist lock cap reduces installation time
- UV stabilised ABS construction
- Excellent sound dispersion
- IP66 rated for weather resistance
- EWIS line monitoring system compatible
- Two cable glands supplied for loop in, loop out wiring
- Stainless steel mounting hardware
- 5 year warranty
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot horn speaker, designed to save installers time and money. |
 |
CF2050W |
|
- Designed to meet AS ISO7240.24:2018 for fire/evac installations
- Requires no external EQ for AS ISO7240.24:2018 fire systems
- Twist lock cap reduces installation time
- UV stabilised ABS construction
- Excellent sound dispersion
- IP66 rated for weather resistance
- EWIS line monitoring system compatible
- Two cable glands supplied for loop in, loop out wiring
- Stainless steel mounting hardware
- 5 year warranty
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot horn speaker, designed to save installers time and money. |
 |
CF2134 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Design is only 108mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2134 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. |
 |
CF2135 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Design is only 108mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2135 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. |
|
CF2142 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Design is only 108mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2142 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. |
 |
CF2234 |
|
- Designed to meet Australian Standard AS ISO7240.24
- Excellent speech intelligibility
- Overall depth only 108mm deep.
- Tuned PA driver designed to meet the latest fire standards
- High quality speaker driver developed for BGM, paging and emergency warning applications
- Patented 3 way latching ensures a neat, sag free installation.
- Fitted with 4 way wire protect terminal for loop in, loop out wiring.
- Fitted with cable restraint plate and flame retardant safety cover.
- Fitted with supervisory capacitor for line monitoring.
- Assembled in Australia.
- 5 year warranty.
|
|
CF2234 is a ceiling mount speaker certified to the AS ISO7240.24 standard for fire & evacuation announcements in buildings. White metal grille finish. |
