| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
110dB Combination Wall Mount Siren StrobeS5415A |
|
| Combined siren and strobe in a single housing. Separate input for siren and strobe. Suitable for indoor or sheltered outdoor use. | |
 |
SPDT Surface Mount Magnetic Reed SwitchS5153 ROHS |
| Surface mount with terminals. SPDT for N.O. and N.C. applications. Includes matching magnet. Approx. 64 x 13 x 13mm size, 54mm mounting hole centres, 15mm max. working distance. | ||
 |
Surface Mount Height Extension for 120mm D...S9065 |
| Allows a dome camera to be surface mounted onto a concrete ceiling. Housing allows cables to be routed through it with electrical conduit entries on both sides. Two models available, one to suit small 94Ømm domes and the other to suit larger 120Ømm dome cameras. Note: camera for illustration purposes. Not suitable for SA9123F & S 980 | ||
 |
Dummy Dome Security CameraS9178A |
|
| This dummy dome gives the impression that the surrounding area is under CCD surveillance. It looks the same as a fully functional dome camera. The perfect, cheap theft deterrent. Dimensions: 95 x 60mm | |
 |
Quantum PIR Swivel Bracket (Suits S5305)S5300 |
| Suits S5305 and S5312 Ness PIR sensors. | ||
 |
300x300mm CCTV Surveillance Corflute SignS9264 |
| A 300 x 300mm surveillance warning sign made out of "corflute" material. Not adhesive. Suitable for attaching to a fence, wall etc. | ||
 |
Surface Mount Height Extension for 94mm Do...S9064 |
| Allows a dome camera to be surface mounted onto a concrete ceiling. Housing allows cables to be routed through it with electrical conduit entries on both sides. Two models available, one to suit small 94Ømm domes and the other to suit larger 131Ømm dome cameras. Note: camera for illustration purposes. Not suitable for SA9123F & S 980 | ||
 |
12V Ceiling Mount Siren Alarm PiezoS6122B |
|
| Mounts unobtrusively into gypsum or tile ceiling. Virtually disappears once installed. 54mm cut out diameter. | |
 |
Small Aluminium CCTV BracketS9066 |
| These camera brackets allow the mounting of a CCD camera to a wall. The S 9066 small bracket may be used with the included extension post to extend the mounting height to 110mm. | ||
 |
Mini Shock Vibration DetectorS5368 |
|
| This vibration detector is is designed for protection against forced entry by a hammer, saw, crowbar, etc. through walls, ceilings, windows, safes, cabinets, etc. | |
 |
400x150mm CCTV Surveillance StickerS9261 |
| Sticks to the outside of the window. Excellent deterrent. 400mm x 150mm size self adhesive sticker. Now required by law in some states. | ||
 |
Outdoor Passive Infra Red Swivel Bracket S...S5311A |
| Swivel bracket to suit S5312A dual PIR and microwave detection unit. | ||
 |
Steel Door Flush Mount Magnetic Reed SwitchS5158B |
|
| Ideal for metal door frames. Includes matching magnet. Press fit design. | |
 |
Steel Door Flush Mount Magnetic Reed SwitchS5158C NEW |
|
| A concealed magnetic reed switch designed for use with metal door frames. | |
 |
SPST Surface Mount Mini Magnetic Reed SwitchS5157A |
| Ultra Mini Size. Surface mount with wire leads. Contacts close with magnet. Includes matching magnet. Approx. 25 x 6 x 5mm size, 8mm max. working distance. | ||
 |
40cm Wiring Door LoopH3820 |
| A flexible steel wiring loop for connection of sensors to doors. Includes mounting tabs at each end. 6mm cable entry. | ||
 |
RJ45 Male to 8-Way Screw Terminal AdapterP0665 |
| ideal for when you don''t have a crimping tool or crimp connector handy. | ||
 |
Alarm System Tamper Switch For Normally Cl...S5174 |
|
| The S 5174 is a normally open (NO) switch designed for normally closed (NC) circuit application. Avoid an intruder tampering with your alarm/security systems with this switch. | |
|
Alarm System Tamper Switch For Normally Op...S5173 |
| The S5173 is a normally closed (NC) switch designed for normally open (NO) circuit application. Avoid an intruder tampering with your alarm/security systems with this switch. | ||
 |
Wall Bracket to Suit Passive Infra Red (PI...S5313A |
| Wall bracket to suit the S 5314A PIR detector | ||
 |
Red 3mm 12V DC Flashing LED With BezelS4021 |
| Mounting hole 8mm. Mounting depth 18mm. Lead length ≈180mm. | ||
 |
Red 3mm 12V DC Flashing LED With BezelS4021A NEW |
|
| Working Voltage: 5-15VDC Mounting Hole: 6mm dia. Mounting Depth: 18mm Lead Length: ≈ 190mm | |
 |
ID (RFID) Access Control Key Fob 125KHzS5376 |
| Key Fob RFID Tag 64 bit code Resonance freq 125kHz Operating temp -15 ~ 55 deg. C | ||
 |
HID (RFID) Access Control Card 13.56MHzS5380 |
| 13.56MHz RFID proximity EM card designed for access control applications. Can be read by standard EM card readers. The card has a thickness of 0.75mm. | ||
|
ID (RFID) Access Control Key Fob 125KHzS5376A |
| Key Fob RFID Tag 64 bit code Resonance freq 125kHz Operating temp -15 ~ 55 deg. C |
