Search Results | - Altronics

1-63 of 63

Description	Downloads	Specs	Ordering
Microphone Module Breakout For Arduino Z6336 DISCONTINUED	Datasheet	Microphone sensor 4 - 12V DC Input Analog output Sensitivity potentiometer Power LED 20cm 3-Wire cable M3 Mounting hole Designed to be compatible with standard 2.54mm pins	NOT AVAILABLE This item is not available to purchase.	High sensitivity. The module has two outputs: AO, analog output, real-time output of the microphone voltage signal / DO, when the sound intensity reaches a threshold, the output high and low signal threshold. Sensitivity potentiometer adjustment included. Application: Microphone sound detection Power Supply: DC 5V Dimensions: 43 x 16 x 14 mm
ADXL345 3 Axis Accelerometer Breakout For ... Z6321A DISCONTINUED	Datasheet	- Power supply: 3~5V - Resolution: 13bit, 4 mg / LSB - Measurement range: +/- 16g - Communication type: SPI / IIC - The digital output data is 16-bit two's complement format - ADXL345 is low power consumption and a 3-axis accelerometer - Suitable for portable device application. - Great for microcontroller's experiment - Capable of measuring less than 1 degree inclination angle change - With freefall detection function - Activity and non-activity detection function, and detects if arbitrary axis acceleration exceeds a user-set limits	NOT AVAILABLE This item is not available to purchase.	The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.
HMC5883L 3 Axis Digital Compass Breakout F... Z6391 DISCONTINUED	Datasheet & Tutorial	The Honeywell HMC5883L is a surface-mount, multi-chip module designed for low-field magnetic sensing with a digital interface for applications such as low- cost compassing and magnetometry. The HMC5883L includes our state-of-the- art, high-resolution HMC118X series magneto-resistive sensors plus an ASIC containing amplification, automatic degaussing strap drivers, offset cancellation, and a 12-bit ADC that enables 1° to 2° compass heading accuracy. The I2C serial bus allows for easy interface. The HMC5883L is a 3.0x3.0x0.9mm surface mount 16-pin leadless chip carrier (LCC). Applications for the HMC5883L include Mobile Phones, Netbooks, Consumer Electronics, Auto Navigation Systems, and Personal Navigation Devices. The HMC5883L utilizes Honeywell’s Anisotropic Magnetoresistive (AMR) technology that provides advantages over other magnetic sensor technologies. These anisotropic, directional sensors feature precision in-axis sensitivity and linearity. These sensors’ solid-state construction with very low cross-axis sensitivity is designed to measure both the direction and the magnitude of Earth’s magnetic fields, from milli-gauss to 8 gauss. Honeywell’s Magnetic Sensors are among the most sensitive and reliable low-field sensors in the industry.	NOT AVAILABLE This item is not available to purchase.	Sensor converts any magnetic field to a differential voltage output on 3 axes, which can then be used to calculate headings or sense magnetic fields coming from different directions. Measuring range: ±1.3-8 Gauss. Includes headers. 3-5V input.
Funduino Uno R3 Arduino Compatible Develop... Z6240X DISCONTINUED		Microcontroller: ATmega328 Operating Voltage: 5V Input Voltage (recommended); 7-9V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50mA Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM: 2 KB (ATmega328) EEPROM: 1 KB (ATmega328) Clock Speed: 16MHz	NOT AVAILABLE This item is not available to purchase.	A microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable.
Electrocardiogram (ECG) Shield Kit For Ard... K2523 DISCONTINUED	Silicon Chip Article	An electrocardiogram or “ECG” is a piece of medical equipment used to measure and record the voltages produced as a result of heart muscle activity. By attaching a pair of electrodes (or “leads” as they are known in the trade) to the skin of your wrists, ankle or chest, this PC-Driven ECG project can display, record or print out the same kind of ECG waveform via your personal computer. Just looking at the waveforms generated by your heart can be both fun and educational. You can monitor changes to your heart under various conditions, as your heart is affected by many things including emotions and mental and physical activity – even breathing. All of these factors have a demonstrable effect on the heart’s ECG waveform. Being able to show this easily, safely and at low cost is an added bonus. Professional ECG machines can cost anything from $5000 up and while this project is not intended to be used as a diagnostic device, the displayed, recorded and printed waveforms are of a quality approaching that of professional machines. In many ways, this new ECG Sampler is as a much improved Mk2 version of the project described in the February 2005 issue of SILICON CHIP. Note: Arduino board not included. This kit includes and requires soldering of SMD components (mostly 1206)	NOT AVAILABLE This item is not available to purchase.	An easy-to-build Arduino project which will let you take your own electrocardiogram (ECG) and display it on a laptop PC. The software lets you read, display, save and print the electrical waveform generated by your heart - or anyone else's.
Heart Rate Monitor Breakout For Arduino Z6352 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	Uses an IR LED and optical transistor to detect pulse on the surface of the skin. Can be easily attached to a velcro strap or ear clip. 3-5V input. 15mmØ.
DRF0259 RS485 Shield for Arduino Z6548 DISCONTINUED		Integrated standard RS485 port ,a mini RS485 port, RS485 headers Provides the welding areas to make full use of the free space. And more importantly, it's convenient for your DIY design. Switches between automatic mode and manual transmission mode, which expand the scope of application. Besides Tx/Rx interface, there is a switch to block/disable this shield, when Arduino needs to be programmed. Gold immersion PCB. Long pins on the back adapt to most Arduino controllers.	NOT AVAILABLE This item is not available to purchase.	This RS485 shield, especially designed for the Arduino controller board can easily convert UART/Serial protocol to RS485 protocol. This board allows Arduino access to industrial standard protocol easily.
DFR0258 RS232 Shield for Arduino Z6546 DISCONTINUED		Voltage: +5V 16 digital IO port (including a I2C interface) 6 analog IO port and power Operation and programming mode switch Transceiver indicating LED DB9 connectors (female), RS232 pins Weldable area Reset switch Module size: 55mmx53mm (2.16"x2.08")	NOT AVAILABLE This item is not available to purchase.	This RS232 shield is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface.
Long Range LoRa Shield for Arduino Z6432 DISCONTINUED		Compatible with 3.3v or 5v I/O Arduino Board. Frequency Band: 915MHz/868 MHZ/433 MHZ (Pre-configure in factory) Low power consumption Compatible with Arduino Leonardo, Uno, Mega, DUE External Antenna via I-Pex connector	NOT AVAILABLE This item is not available to purchase.	The Arduino Compatible Long Range LoRa shield turns your Arduino into a LoRa node capable of transmitting and receiving data over long distance, even several kilometres, withour the need of a GSM network.
DFR0323 Bluno Mega2560 Arduino with Blueto... Z6534 DISCONTINUED		Microcontroller: ATmega2560 Clock frequency: 16MHZ Transmission distance: 70m in free space Support bluetooth remote update the Arduino program Support bluetooth HID Support iBeacons Support by the AT command to debug the BLE Support transparent transmission serial port Support the master-salve machine switch Support usb update BLE chip program Working voltage：+5V External input voltage (recommended): 7V~12V DC External input voltage (range): 6V~20V DC Digital I/O outputs: 54 (14 PWM outputs) Analog inputs: 16 I/O current: 40mA Flash capacity: 128KB (4k for bootloader) Static storage capacity of SRAM: 8KB Memory capacity of EEPROM: 4KB Size: 108 x 54mm	NOT AVAILABLE This item is not available to purchase.	Bluno Mega2560 inherits the numerous ports and the abundant resources of Mega series, and adds Bluetooth 4.0 wireless communication function.
DFR0296 Bluno Nano Arduino Nano With Bluet... Z6532 DISCONTINUED		On-board BLE chip: TI CC2540 Transmission range: more than 20m DC Supply: USB Powered Microcontroller: Atmega328 Bootloader: Arduino Uno Compatible with the Arduino Uno pin mapping Size: 53mmx19mmx12mm Weight: 20g	NOT AVAILABLE This item is not available to purchase.	Bluno Nano integrates a TI CC2540 BT 4.0 chip with the Arduino UNO development board. It allows wireless programming via BLE, supports Bluetooth HID, supports AT command to config the BLE, and you can upgrade BLE firmware easily.
Arduino Mega Platform Starter Kit K9617 DISCONTINUED		Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.	NOT AVAILABLE This item is not available to purchase.	Great for tinkering with the Arduino Mega. Includes a GPIO breakout module with 500 hole prototyping board and power supply with a sturdy translucent blue acrylic base. Ideal for schools and learning labs.
DFR0116 USBtinyISP Arduino Bootloader Prog... Z6540 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino.
DFR0327 Arduino Expansion Shield for Raspb... Z6550 DISCONTINUED		Arduino Leonardo Chip Arduino Compatible pin mapping Compatible with All arduino standard shield and sensors	NOT AVAILABLE This item is not available to purchase.	Allows the Raspberry pi to communicate with the Arduino to let each controller be utilised to their strengths and perform tasks that they are better at than each other. Creating a much more efficient system than each would be on its own.
DFR0267 Bluno Arduino Uno with Bluetooth 4.0 Z6526 DISCONTINUED		Support Wireless Programming Via BLE Support Bluetooth HID Support IBeacons Support AT command to config the BLE Transparent communication through Serial BLE firmware updating Supported: Android System 4.3+ with BLE4.0 module inside with original firmware with BLE driver. e.g. Nexus 4+, Xaiomi 2s, Samsung Galaxy s4, Samsung Galaxy note 3 etc. iOS 7.0+ devices: iPhone 4s+, iPad 3+, iPad Mini, iPod 5th Gen (iPhone 4s is not 100% supported.) Not compatible with: Other brand BLE modules/devices since different firmware using in CC2540 e.g. FAQ > Q12 Bluetooth 2.0 or other types of bluetooth modules/devices	NOT AVAILABLE This item is not available to purchase.	Bluno is first of its kind in intergrating BT 4.0 (BLE) module into Arduino Uno, making it an ideal prototyping platform for both software and hardware developers to go BLE. You will be able to develop your own smart bracelet , smart pedometer and more.
Arduino Workshop B2474 DISCONTINUED		Author: John Boxall ISBN: 978-1-59327-448-1 Pages: 370	NOT AVAILABLE This item is not available to purchase.	The Arduino is an affordable, flexible, open source microcontroller platform designed to make it easy for the novice to use electronics in hobby projects. With a vast range of input and output add-ons.
Arduino Robot Bonanza Book B2441 DISCONTINUED		Author: Gordon McComb ISBN13: 9780071782777 ISBN10: 007178277X Pages: 464 Edition: 1	NOT AVAILABLE This item is not available to purchase.	Learn how to build seven fun, functional, and affordable robots - all using the Arduino microcontroller. Arduino Robot Bonanza explains how to build a wide variety of robots that roll, walk, talk, crawl, slither - and even sling insults - with the Ardu
RN-42 Bluetooth Module Z6230 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	A class 2 Bluetooth module designed to replace the need for serial cables when sending data/code to your design. Low current consumption is ideal for short range battery powered applications. 3.3V operation. Compatible with all Bluetooth devices that supp
Get Started With Arduino B2469 DISCONTINUED		Authors: Jonathan Oxer and Hugh Blemings ISBN-13 9781449309879 Pages: 118	NOT AVAILABLE This item is not available to purchase.	Arduino is the open-source electronics prototyping platform that
Programming Arduino Getting Started with S... B2468 DISCONTINUED		Author: Simon Monk ISBN: 978007178422-1 MHID: 007178422-5 Pages: 162 Edition: 1	NOT AVAILABLE This item is not available to purchase.	An introductory Arduino programming guide for artists and hobbyists. Leads readers from basic through to advanced C programming concepts. Fast-paced tutorials for developing working Sketches (the name given to Arduino programs). Fills the gap in the marke
DEV-10277 ATmega8U2 Development Board Z6204 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	The board comes pre-loaded with the SparkFun USB to Serial COM Port firmware. When the board plugs into a USB port, Windows will ask for a driver, point to the driver .inf file. The board should now enumerate as a ''SparkFun COM Port'' and act the same as the SparkFun FTDI Basic
DEV-09815 ArduMoto Motor Shield Z6208 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	This Arduino motor shield allows control of two DC motors. Based on the L298 H-bridge, it's capable of driving 2A per channel.
Arduino Ethernet Shield R3 Z6282 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet via a stan
DFR0250 AA Battery Boost Module V2 Z6544 DISCONTINUED		Input voltage: 1.8V - 4.5V Maximum Output voltage：5V Maximum Output current：1A size：6233mm (2.441.30")	NOT AVAILABLE This item is not available to purchase.	With this AA boost module, insert two dry batteries, flip the power switch, and you have a 5V output to power your circuit. Two AA batteries will be enough to reach standard 5V easily and convenient to use.
LC Meter Shield For Arduino Kit K9705 DISCONTINUED	Sample Code	Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.	NOT AVAILABLE This item is not available to purchase.	When paired with an Arduino UNO this handy shield can measure inductance and capacitance with greater accuracy than most digital multimeters. Can be paired with a 16x2 alphanumeric display as a readout. 10nH to 100mH+ inductance range. 0.1pF to 2.7uF+ (non polarised) capacitance range. Five digit resolution with 1% accuracy. 5V input.
Programming Arduino Going Further With Ske... B2467 DISCONTINUED		Author: Simon Monk ISBN: 978007183025-6 MHID: 007183025-1 Pages: 162 Edition: 1	NOT AVAILABLE This item is not available to purchase.	In this hands-on guide, electronics author Simon Monk unlocks the intricate details of Arduino and explains professional programming secrets. Models covered include the Arduino Uno, Leonardo, and Due boards.
Ethernet Shield 2 With PoE Z6283 DISCONTINUED		Requires an Arduino Board (not included) Operating voltage 5V (supplied from the Arduino Board) Ethernet Controller: W5500 with internal 32K buffer Connection speed: 10/100Mb Connection with Arduino on SPI port	NOT AVAILABLE This item is not available to purchase.	The Arduino Ethernet Shield 2 connects your Arduino board to the internet. The Shield has a Power over Ethernet (PoE) module designed to extract power from a conventional Ethernet cable.
Programming Arduino Getting Started with S... B2468A DISCONTINUED		Author: Simon Monk ISBN: 9781259641633 Pages: 208 Edition: 2	NOT AVAILABLE This item is not available to purchase.	An introductory Arduino programming guide for artists and hobbyists. Leads readers from basic through to advanced C programming concepts. Fast-paced tutorials for developing working Sketches (the name given to Arduino programs). 2nd edition
2A Lithium Charger Module Z6443 DISCONTINUED		Double 8.4v / 4.2V lithium rechargeable single Programmable charge current. 0. 1A-2A Programmable steady precharge current 10%-100%. Wide operating voltage, maximum reach I8V Red and green LED charge status indicator Chip temperature protection, overcurrent protection, undervoltage protection Battery temperature protection, reverse battery shutdown, short circuit protection Switching frequency 400Khz, usable inductance 20uH and more PWR_ON Power battery for switching control	NOT AVAILABLE This item is not available to purchase.	This charger module is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. Its ultra-compact QFN16 package and simple external circuit makes it ideal for portable equipment so in turn making it ideal for large current charging management applications.
DEV-10889 Protosnap Mini Z6200 DISCONTINUED		1 x Arduino Pro Mini 5V/16MHz (With Optiboot) 1 x FTDI Basic Breakout 5V 1 x Buzzer 1 x RGB LED 1 x Light Sensor 1 x Push Button 1 x Protoboard	NOT AVAILABLE This item is not available to purchase.	1 x Arduino Pro Mini 5V/16MHz (With Optiboot) 1 x FTDI Basic Breakout 5V 1 x Buzzer 1 x RGB LED 1 x Light Sensor 1 x Push Button 1 x Protoboard
Arduino Uno R3 Development Board Z6280 DISCONTINUED		Microcontroller: ATmega328 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 20 (of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM: 2 KB (ATmega328) EEPROM: 1 KB (ATmega328) Clock Speed: 16 MHz Length: 68.6 mm Width: 53.4 mm Weight: 25 g	NOT AVAILABLE This item is not available to purchase.	The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a compute
Arduino Mega 2560 R3 Development Board Z6281 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the micro
DEV-11098 ATmega 32U4 Pro Micro Developmen... Z6214 DISCONTINUED		ATMega 32U4 running at 5V/16MHz Supported under Arduino IDE v1.0 (un-comment "leonardo" lines in boards.txt) On-Board micro-USB connector for programming 4 x 10-bit ADC pins 12 x Digital I/Os (5 are PWM capable) Rx and Tx Hardware Serial Connections Our Smallest Arduino-Compatible Board Yet!	NOT AVAILABLE This item is not available to purchase.	ATMega 32U4 running at 5V/16MHz Supported under Arduino IDE v1.0 (un-comment "leonardo" lines in boards.txt) On-Board micro-USB connector for programming 4 x 10-bit ADC pins 12 x Digital I/Os (5 are PWM capable) Rx and Tx Hardware Serial Connections Our Smallest Arduino-Compatible Board Yet!
DEV-11114 Pro Mini 328 3.3V/8MHz Z6220 DISCONTINUED		ATmega328 running at 8MHz with external resonator (0.5% tolerance) Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc) USB connection off board Weighs less than 2 grams! Supports auto-reset 3.3V regulator Max 150mA output Over current protected Reverse polarity protected DC input 3.3V up to 12V On board Power and Status LEDs Analog Pins: 8 Digital I/Os: 14 Dimensions: 18x33mm	NOT AVAILABLE This item is not available to purchase.	It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R
DEV-11113 Pro Mini 328 5V/16MHz Z6222 DISCONTINUED		ATmega328 running at 16MHz with external resonator (0.5% tolerance) Low-voltage board needs no interfacing circuitry to popular 5V devices and modules (GPS, accelerometers, sensors, etc) USB connection off board Weighs less than 2 grams! Supports auto-reset 5V regulator Max 150mA output Over current protected Reverse polarity protected DC input 3.3V up to 12V On board Power and Status LEDs Analog Pins: 8 Digital I/Os: 14 Dimensions: 18x33mm	NOT AVAILABLE This item is not available to purchase.	It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3
Exploring Arduino Tools And Techniques For... B2466 DISCONTINUED		Explore the features of several commonly used Arduino boards Use the Arduino to control very simple tasks or complex electronics Learn the principles of system design, programming and electrical engineering Discover code snippets, best practices, and system schematics you can apply to your own personal projects. Master skills you can use for engineering endeavours in other fields and with different platforms	NOT AVAILABLE This item is not available to purchase.	Exploring Arduino will walk you through specific lessons in electrical engineering, programming and human-computer interaction to allow you to create a series of increasingly sophisticated projects. All the while encouraging creativity.
Nokia 5110 LCD Screen Breakout Module Z6348 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	A basic LED backlit LCD screen for your project. As used in the Nokia 5110 mobile phone released in 1998! Operates on 3V3 or 5V DC. Plugs directly onto the Z 6340 joystick shield. Size: 45x45mm.
Make Lego and Arduino Projects B2473 DISCONTINUED		Author: John Baichtal, Matthew Beckler and Adam Wolf ISBN - 9781449321062 Pages: 311	NOT AVAILABLE This item is not available to purchase.	Construct amazing robots and devices using two of today's hottest hobby electronics technologies. With this simple, clear guide, you'll learn to assemble devices with LEGO
Tab Book Of Arduino Projects B2465 DISCONTINUED		Author: Simon Monk ISBN - 9780071790673 Pages: 400	NOT AVAILABLE This item is not available to purchase.	The definitive collection of Arduino projects for the hobbyist and experimenter, Catapults your Arduino skills to the next level. Learn how to design custom circuits with Proto shields and then solder parts to the prototyping area to cease professional devices.
Arduino R3 Starter Kit Z6289 DISCONTINUED	Data Sheet	1. GET TO KNOW YOUR TOOLS an introduction to the concepts you'll need to use this kit 2. SPACESHIP INTERFACE design the control panel for your starship 3. LOVE-O-METER measure how hot-blooded you are 4. COLOR MIXING LAMP produce any color with a lamp that uses light as an input 5. MOOD CUE clue people in to how you're doing 6. LIGHT THEREMIN create a musical instrument you play by waving your hands 7. KEYBOARD INSTRUMENT play music and make some noise with this keyboard 8. DIGITAL HOURGLASS a light-up hourglass that can stop you from working too much 9. MOTORIZED PINWHEEL a colored wheel that will make your head spin 10. ZOETROPE create a mechanical animation you can play forward or reverse 11. CRYSTAL BALL a mystical tour to answer all your tough questions 12. KNOCK LOCK tap out the secret code to open the door 13. TOUCHY-FEEL LAMP a lamp that responds to your touch 14. TWEAK THE ARDUINO LOGO control your personal computer from your Arduino 15. HACKING BUTTONS create a master control for all your devices!	NOT AVAILABLE This item is not available to purchase.	The official Arduino starter kit which includes a UNO R3 board with a getting started project book & a collection of project components (resistors, LEDs, servo motor, LCD screen, capacitors and more!).
Get Started With Arduino 3rd Edition B2469A DISCONTINUED		Authors: Massimo Banzi and Michael Shiloh ISBN-978-1-4493-6333-8 Pages: 245	NOT AVAILABLE This item is not available to purchase.	Arduino is the open-source electronics prototyping platform that's taken the design and hobbyist world by storm. This thorough introduction, updated for Arduino 1.0, gives you lots of ideas for projects and helps you work with them right away.
Atmel AVR ATTINY85-20SU 8 Pin Y5105 DISCONTINUED	Datasheet	High-performance, Low-power AVR® 8-Bit Microcontroller Advanced RISC Architecture Non-volatile Program and Data Memories debugWIRE On-chip Debug System In-system Programmable via SPI Port External and Internal Interrupt Sources Low-power Idle, ADC Noise Reduction and Power-down Modes Enhanced Power-on Reset Circuit Programmable Brown-out Detection Circuit Internal Calibrated Oscillator 0 to 20MHz at 4.5 to 5.5V Speed Grade 1MHz, 1.8V, 300µA Active Mode, 0.1µA at 1.8V Power-down Mode Low Power Consumption	NOT AVAILABLE This item is not available to purchase.	ATTINY85-20SU 8 Pin SOIC SMD Atmel Microcontroller.
30 Arduino Projects for the Evil Genius Book B2485 DISCONTINUED		Author: Simon Monk ISBN13: 9780071741330 ISBN10: 007174133X Pages: 208	NOT AVAILABLE This item is not available to purchase.	A hands-on guide to creating fun devices with the Arduino microcontroller system. Includes 30 step-by-step projects with clear instructions, illustrations, photographs, and diagrams. Arduino is the open-source physical computing platform that's rapidly be
Arduino + Android Projects for the Evil Ge... B2486 DISCONTINUED		Author: Simon Monk ISBN13: 9780071775960 ISBN10: 007177596X Pages: 224	NOT AVAILABLE This item is not available to purchase.	Reveals how to create Arduino devices and control them with Android smartphones and tablets Features several home automation devices for controlling home heating and lighting, locking and unlocking doors, and more. Includes the author's exclusive sound-b
DFR0329 Bluno M3 STM32 ARM with Bluetooth 4.0 Z6536 DISCONTINUED		Supports Bluetooth Wireless Programming Supports Bluetooth HID Supports AT commands to configure BLE Supports firmware upgrades Supports mobile control Compatible with Arduino Uno pin mappings Supports Android and IOS applications, open source code, suitable for secondary development by the user	NOT AVAILABLE This item is not available to purchase.	The Bluno M3 is a new Arduino compatible prototyping platform based on a 32-bit ARM processor. This microcontroller integrates a Bluetooth 4.0 chip and a STM32 ARM controller on the board.
ATmega328P MCU with Arduino Uno bootloader Z5126 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	ATMEGA328-28PU, 28 Pin DIP. Preloaded with the Arduino UNO bootloader. Ideal for building your own microcontroller projects on a breadboard.
2.8" TFT 320 x 240 LCD Touchscreen Shield ... Z6510 DISCONTINUED		Screen Size: 2.8" Azimuth angle: 90° Module Dimension: 81H x 53W x 15Dmm Active Area: 43.2W x 57.6Hmm Resolution Ratio: 240W x 320H Pixel size: 0.18 x 0.18mm LCD Driver Chip: ILI9325 Logic Level: 2.8V-3.3V· Data Interface: 8/16bit Bus Interface TFTLCD Shield: 8 bit Bus Mode Power Supply: DC 5V Backlight: White	NOT AVAILABLE This item is not available to purchase.	A 2.8" resistive touchscreen shield for Arduino. Features a 240x320px resolution screen and utilises the ILI9325 LCD driver chip. 2.8-3.3V logic level voltage input.
30 Arduino Projects for the Evil Genius Bo... B2485A DISCONTINUED		Author: Simon Monk ISBN13: 9780071817721 ISBN10: 0071817727 Pages: 204	NOT AVAILABLE This item is not available to purchase.	A hands-on guide to creating fun devices with the Arduino microcontroller system. Includes 30 step-by-step projects with clear instructions, illustrations, photographs, and diagrams.
LED Dot Matrix RGB 64 X 32 Z6518 DISCONTINUED	Instructions	Dimensions: 385mm x 190mm x 13mm / 15.2” x 7.5” x 0.5” Panel weight with IDC cables and power cables: 544.31g 5V regulated power input, 4A max (with all LEDs on) 5V logic level 6mm pitch 64x32 RGB LED Matrix 1/16 scan rate Indoor display, 160 degree visibility	NOT AVAILABLE This item is not available to purchase.	These linkable panels are ideal for making highly visible scrolling signs, information readouts, clocks and timers. Readable up to 52m away! 5mm pitch LEDs.
WIG-11511 MaKey MaKey Kit Z6250 DISCONTINUED		Very easy to setup and play with On board ATMega32u4 with Leonardo bootloader Communicates using Human Device Interface with your PC Includes board, USB cable, pack of jumper cables and alligator clips	NOT AVAILABLE This item is not available to purchase.	The MaKey MaKey kit uses high resistance switching to detect when you
Funduino SKM53 Skylab GPS Smart Antenna Mo... Z6331 DISCONTINUED	Datasheet	Ultra high sensitivity: -165dBm 22 tracking/66 acquisition-channel receiver WAAS/EGNOS/MSAS/GAGAN support NMEA protocols (default speed: 9600bps) Internal back-up battery One serial port Embedded patch antenna 18.2 x 18.2 x 4.0 mm Operating temperature range: -40 to 85℃ RoHS compliant (Lead-free) Dimensions: 30mm x20mm x 8.5mm	NOT AVAILABLE This item is not available to purchase.	The SKM53 Series module with embedded GPS antenna gives accurate navigation in the most demanding applications and a solid position even in harsh GPS reception environments.
Arduino Due Development Board Z6284 DISCONTINUED		A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU Clock at 84Mhz. 96 KBytes of SRAM. 512 KBytes of Flash memory for code. a DMA controller, that can relieve the CPU from doing memory intensive tasks.	NOT AVAILABLE This item is not available to purchase.	The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller.
FIT0429 FT232 D9 to OBD2 Serial Cable Z6558 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	OBD II is an On-Board Diagnostics standard that is used on a wide variety of cars. It allows access to numerous engine control parameters from the ECU and offers a valuable source of information when troubleshooting problems inside a vehicle.
Real Time Clock DS1307 RTC Module for Rasp... Z6554 DISCONTINUED		THIS PRODUCT CONTAINS A BUTTON BATTERY. - If swallowed, a lithium button battery can cause severe or fatal injuries within two hours. - Keep batteries out of reach of children. - If you suspect your child has swallowed or inserted a button battery, immediately call the 24-hour poisons information centre on 13 11 26 (within Australia) and seek medical attention.	NOT AVAILABLE This item is not available to purchase.	This RTC module is specifically designed for Raspberry Pi. It communicates with the Raspberry Pi through the I2C bus. It includes a Maxim DS1307 and CR1220 button cell on the board.
LED Dot Matrix RGB 32 X 32 Z6517 DISCONTINUED		Daisy chainable design Includes IDC & power cables Ideal for signage & visual design projects RGB input signal - suitable for Arduino, Raspberry Pi etc.	NOT AVAILABLE This item is not available to purchase.	These linkable panels are ideal for making highly visible scrolling signs, information readouts, clocks and timers. Readable up to 52m away! 5mm pitch LEDs.
Arduino Yun Development Board Z6286 DISCONTINUED		Microcontroller: ATmega32u4 Operating Voltage: 5V Input Voltage: 5V Digital I/O Pins: 20 PWM Channels: 7 Analog Input Channels: 12 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 32 KB (of which 4 KB used by bootloader) SRAM: 2.5 KB EEPROM: 1 KB Clock Speed: 16 MHz Linux microprocessor Processor: Atheros AR9331 Architecture: MIPS @400MHz Operating Voltage: 3.3V Ethernet : IEEE 802.3 10/100Mbit/s WiFi: IEEE 802.11b/g/n USB: Type-A 2.0 Host Card Reader : Micro-SD only RAM: 64 MB DDR2 Flash Memory: 16 MB PoE: compatible 802.3af card support (see the note below) Length: 73 mm Width: 53 mm Weight: 32 g	NOT AVAILABLE This item is not available to purchase.	The Arduino Yún is a microcontroller board based on the ATmega32u4 and the Atheros AR9331.
FIT0416 FT232 USB to TTL Serial Cable Z6522 DISCONTINUED	FTDI Drivers	Voltage: 5V or 3.3V Max power consumption: 110mA at 5v Interface: SPI Pixel resolution: 128x64 Display size: 2.7 inch Module size: 85x58x6.5mm	NOT AVAILABLE This item is not available to purchase.	This FT232 USB to TTL Serial Cable features a FT232 conversion chip, which has features such as high precision, outstanding stabilization, and anti-interference capabilities.
DFR0275 2.8" USB 320 x 240 LCD Touchscreen... Z6509 DISCONTINUED		Extensive Device Support: You can use it as a display for most embedded development board on the current market (such as RaspberryPi, Cubieboard, etc.). Benefit from USB interface that provides opportunity for those devices that cannot connect with monitor for display in the past like routers. In addition, we support Arduino Yun and Intel Galileo Developer Edition! Standard Device Interface: With the drivers developed by RoboPeak, RPUSBDisp can be identified as a standard display and touch-screen device by the operating system, that means any existing graphical interface program can be displayed without any modification. Open Source Brings More Possibilities: As an open source project, we provide its schematics, communication protocols, Linux kernel driver code and so on. That helps you develop and create new designs easily.	NOT AVAILABLE This item is not available to purchase.	This portable USB monitor with touch screen (RPUSBDisp) is designed specifically for embedded designs with business card size and it just requires a USB cable to make it work without additional power supply.
Mega box for Arduino K9670 DISCONTINUED	Example Code	Utilises a half rack 1RU size case 16x2 alphanumeric display Rotary encoder control 4 push buttons Compatible with Arduino UNO/mega boards Two 2A 5V relay outputs On board reset and LEDs All main board pins broken out to header sockets	NOT AVAILABLE This item is not available to purchase.	Developed in house by Altronics, the MegaBox allows an Arduino UNO or Mega to be plugged into it, along with a shield. This allows you to build your design into a finished case.
TOY0005 2828 OLED Display Module Z6524 DISCONTINUED		Operating Voltage：3.3V，5V 262,144k Colors(max) 128×128 RGB pixel resolution Interface：SPI or Gadgeteer Operating emperature：-30℃ ~ +70℃ OLED Size：26.855 x 26.864mm (1.057 x 1.058") Module Size：52.00 x 42.00mm (2.05 x 1.65") Weight：20 g Size：1.5 inch Driver IC：SSD1351 Pins Identification Arduino port 3.3：Logic power3.3V 5V：OLED power 5V （through boost circuit to supply 13V to screen） G：GND RST：reset SCK：SCK SI：MOSI CS：Chip Select DC：D/C	NOT AVAILABLE This item is not available to purchase.	This OLED display works without a backlight. Thus, it can display deep black levels and can be thinner and lighter than an LCD display. In low ambient light conditions such as a dark room an OLED screen can achieve a higher contrast ratio than an LCD.
DEV-09873 FTDI Basic Breakout 3.3V Z6210 DISCONTINUED			NOT AVAILABLE This item is not available to purchase.	This is the newest revision of the FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout o
DFR0347 2.8" TFT 320 x 240 LCD Touchscreen... Z6511 DISCONTINUED		Extensive Device Support: You can use it as a display for most embedded development board on the current market (such as RaspberryPi, Cubieboard, etc.). Benefit from USB interface that provides opportunity for those devices that cannot connect with monitor for display in the past like routers. In addition, we support Arduino Yun and Intel Galileo Developer Edition! Standard Device Interface: With the drivers developed by RoboPeak, RPUSBDisp can be identified as a standard display and touch-screen device by the operating system, that means any existing graphical interface program can be displayed without any modification. Open Source Brings More Possibilities: As an open source project, we provide it's schematics, communication protocols, Linux kernel driver code and so on. That helps you develop and create new designs easily.	NOT AVAILABLE This item is not available to purchase.	This TFT Touch screen is a fantastic shield with big (2.8" diagonal) and 240x320 pixels with individual pixel control which could apply to Arduino and mbed.
DFR0282 Beetle Board Z6530 DISCONTINUED		20mm X 22mm compact size Direct downloading and testing via Micro USB V-shaped large-size gold-plated IO ports make it convenient for the user to twist wires upon, and can also be directly sewn on clothes with conductive thread. Two honeycomb shape gold-plated power interface Magic light blue soft BLINK indicator	NOT AVAILABLE This item is not available to purchase.	The new generation "Beetle" controller utilises minimalist design without compromising functionality. It comes with Atmel AtMega32u4 @16MHz clock speed and has an expanded number of interfaces.

Connection

Extension

Cables & Adaptors

Television

Headphones

Mobile AV

Amplifiers

Signal Processing

Fire Evacuation

Paging, BGM & Messaging

19" Rack Systems

100V Line Speakers

Stereo Speakers

Cable

Heat Shrink Tubing

Cable Installation

Wallplates

DC Power

AC Power

Audio Video

Data Connectors

Crimps & Lugs

Terminals

RF Connectors

Banana & Binding Posts

Power Adapters

Mains Power

Solar & Remote Power

LED Lighting

Batteries

Transformers

Tools

Soldering

Test Equipment

Consumables

Technology

Patch Leads & Adaptors

Development

CCTV

Alarm & Access Control

3D Printing

Arduino

Raspberry Pi

BBC Micro:bit

Educational Electronics

Kits

Components

Hardware

Switches

Search Results 63 deleted products found

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE

NOT AVAILABLE