|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4026A NEW
|
|
- 19" rack system mountable.
- Push to talk (PTT) muting on microphone 1.
- Balanced microphone inputs.
- VOX muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
|
COMING SOONThis item is arriving soon. |
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. Rack mount version of Redback A 4024A. |
 |
A4024A NEW
|
|
- VOX muting on input 1.
- Balanced microphone inputs.
- Output muting circuit.
- Stereo line inputs & tape output.
- Bass and treble tone controls.
- Output terminals for 100V line and 8 - 16Ω loads
- Over-voltage, over current, thermal run-away and short circuit load protection.
- Muting Features: VOX Muting Via Input 1, Switch Contacts and Output Muting
|
COMING SOONThis item is arriving soon. |
A staple of the Redback range since we first started, the 30W amplifier meets the requirements of small to medium public address installations. |
 |
C2065 NEW
|
|
- Ideal for the following applications; siren, playback or pre-recorded content or real time reinforment through microphone
- High on SPL, small in size
- Weather proof housing
- Complimentary grey colour housing
- Mountable to either the bonnet or top of vehicle
- Heavy duty low profile metal bracket
|
|
This horn is compact, lightweight, weatherproof and very efficient. The voice coil is wound on an aluminium bobbin providing effective heat transfer from the coil thereby improving the efficiency and reliability of the speaker. |
 |
S0082A NEW
|
|
- Easy to set up
- Multiple operating modes
- Up to 24 hour timing duration
- DIN mount enclosure
- 12-24VDC operation
- 5A relay contacts
- Includes Power Supply
|
|
This compact 12-24VDC timer has a multitude of operating modes. |
 |
A2233A NEW
|
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A2246A |
|
 Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
 |
C2190A NEW
|
|
- Redback® “Fast-Fix” speaker utilise a time saving flip lock mounting method. It results in a finish with no visible screw heads or caps. The flip lock tabs slide outwards as the speaker is screwed into the hole, securing the speaker to the ceiling material from the top side. Suitable for use with any 8-33mm ceiling tile, including gyprock, mineral fibre or fixed gyprock ceilings. We recommend using our T 2314A holesaw to cut the speaker hole.
|
|
The C 2190A is a high power 30W PA speaker designed for BGM, paging & emergency warning applications. The offset transformer mounting allows mounting in ceilings with limited recess space. |
 |
A2235A NEW
|
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. Horizontal 10W model. |
 |
A2234A NEW
|
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. Horizontal 10W model. |
 |
A4437 NEW
|
|
- 4 mic or line inputs
- Balanced line or RCA outputs
- VOX priority on input 1 and 2
- Phantom power ON/OFF for mic inputs
- Remote evacuation system muting contacts
- 24V DC operation
- Individual volume, treble and bass for all inputs
- Provision for A4573 alert evac tone generator module
- Australian designed and manufactured.
|
|
Works as a stand alone audio processor with four mic/line inputs for microphone and music sources. When the FIB operates it triggers these contacts, rending the local PA/BGM system inoperative so the main emergency evacuation system has precedence. |
 |
A4022A NEW
|
|
- Balanced microphone input
- Built in VOX muting circuit
- Stereo line inputs
- Bass and treble tone controls
- 240V AC operation
|
|
Designed to meet the requirements of small to medium sized professional public address installations, delivering an output power of 30W RMS. |
 |
A2239 NEW
|
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A2238 NEW
|
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A4465 NEW
|
|
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. Balanced audio is relayed back to a Redback solutions receiver. |
 |
A2260B NEW
|
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
PC0456B NEW
|
|
|
|
5pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
 |
PC0446B NEW
|
|
|
|
3pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
 |
A4467 NEW
|
|
|
|
A handy remote pairing plate to suit the Redback A4515/20 BT 5.0 receiver units. Connection is via any standard 4 core cabling back to the main receiver unit. This allows users to remote activate the pairing mode on the Redback A4515/20. Switch is fitted to a standard size Australian single gang electrical wallplate. |
 |
A4520 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Half 19" rack box, can be rack mounted with additional accessories (see below).
- Australian designed and manufactured.
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
 |
A4515 NEW
|
|
- Custom naming for each receiver used in a system.
- UTP output connection for extending signal to system amplifiers using Redback UTP solutions receivers.
- Pairing trigger contacts for use with A4467 remote wallplate or other external switch.
- Adjustable level control.
- External pairing LED output.
- RCA line output for local connection to amplifier.
- 24V DC powered (power supply included).
- Australian designed and manufactured.
|
|
This commercial grade BT 5.0 receiver offers the ability to interface Bluetooth audio devices into public address systems. |
 |
CL8894D NEW
|
|
|
|
A dual charging dock suitable for use with CL8892D and CL8893D USB C rechargeable microphone transmitters. |
 |
CL8893D NEW
|
|
- USB rechargeable with internal lithium battery
- Can be used with a range of Redback mini XLR headsets and lapel microphones
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
|
|
Wireless lavalier beltpack 700 channel transmitter ideal for use with the Redback® 700 channel receiver unit (C8890D). |
 |
C2026A NEW
|
|
- Impedance: 8Ω
- Power Rating: 25W
- IP Rating: IP65
- SPL: 108dB, 1W @ 1m
- Freq. Resp.: 250Hz - 10kHz
- Dimensions: 300 x 180 x 290mm
|
|
This horn is compact, lightweight, weatherproof and very efficient. The voice coil is wound on an aluminium bobbin providing effective heat transfer from the coil thereby improving the efficiency and reliability of the speaker. |
 |
CL8892D NEW
|
|
- USB rechargeable with internal lithium battery
- Unidirectional condenser insert
- Exceptional performance
- Anti-roll band
- Textured body
|
|
Wireless handheld 700 channel microphone ideal for use with the Redback® 700 channel receiver unit (C8890D). |
 |
C0895A NEW
|
|
- Stylish low profile sloping profile case.
- Twin cone driver.
- Flush mount metal grille.
- Tamper proof security screw wall bracket.
- Side mount volume level control with evacuation system override relay
- 100V line monitoring capacitor.
|
COMING SOONThis item is arriving soon. |
A slimline 6.5” loudspeaker constructed from high impact ABS with metal mesh grill. |
 |
C0891A NEW
|
|
- Stylish low profile sloping profile case.
- Flush mount metal grille.
- Tamper proof security screw wall bracket.
- 100V line monitoring capacitor.
- Twin cone driver.
|
COMING SOONThis item is arriving soon. |
A slimline 6.5” loudspeaker constructed from high impact ABS with metal mesh grill. |
 |
A2265SS NEW
|
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A stainless steel version of our popular Redback 40W volume attenuator. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A4414 NEW
|
|
- Balanced input and outputs
- 3 pin XLR connections
- Mic or line level operation for individual input/outputs
- Loop output for connection to multiple distributors
- Compact half rack 1RU cabinet
- 24V DC operation
- Australian designed and manufactured
|
|
This compact half rack distributor comprises of a single 3 pin balanced XLR input to four 3 pin balanced XLR outputs. Great for splitting a single audio source out to multiple zones without interference between channels. |
 |
A4389 NEW
|
|
- 6 Balanced microphone inputs / 6 Aux inputs / 1 Music input
- Robust design incorporating latest Mosfet technology
- Very Low noise and distortion
- 100V standard with optional 70V and 4-16Ω outputs
- 240V AC or 24V DC operation
- VOX muting on inputs 1 and 2 (Switch selectable internally)
- Adjustable VOX level sensitivities
- Bass and Treble controls
- Tape Output
- Phantom power on microphone inputs (DIP switch selectable internally)
- Multi stage thermally cued fan cooling
- Output Peak Limited
- Thermal Overload protected
- Signal Presence Indicator
- Half power mode when overdriven
- Fault Indicators
- 24V DC Power Status Indicator
- Optional Alert/Evac module with voice over message for emergency tones (A 4573)
- Optional remote volume (With A 4373 Digital volume control module fitted and external A 2280B wall plate)
- Rack Mountable (suits 19 inch racks) with optional A 4376 rack ears
|
|
Designed for applications requiring up to six microphone inputs, without compromising output power and overall performance. Each model features inputs which can be configured for either microphone or line level operation. |
 |
A4379 |
|
- 6 Balanced microphone inputs / 6 Aux inputs / 1 Music input
- Robust design incorporating latest Mosfet technology
- Very Low noise and distortion
- 100V standard with optional 70V and 4-16Ω outputs
- 240V AC or 24V DC operation
- VOX muting on inputs 1 and 2 (Switch selectable internally)
- Adjustable VOX level sensitivities
- Bass and Treble controls
- Tape Output
- Phantom power on microphone inputs (DIP switch selectable internally)
- Multi stage thermally cued fan cooling
- Output Peak Limited
- Thermal Overload protected
- Signal Presence Indicator
- Half power mode when overdriven
- Fault Indicators
- 24V DC Power Status Indicator
- Optional Alert/Evac module with voice over message for emergency tones (A 4573)
- Optional remote volume (With A 4373 Digital volume control module fitted and external A 2280B wall plate)
- Rack Mountable (suits 19 inch racks) with optional A 4376 rack ears
|
|
Designed for applications requiring up to six microphone inputs, without compromising output power and overall performance. Each model features inputs which can be configured for either microphone or line level operation. |
 |
A4424 NEW
|
|
- Six mic / line input channels.
- Two outputs via XLR/RCA 1V balanced.
- Level, bass and treble control on all inputs.
- Adjustable input sensitivity.
- Phantom power selection on each input.
- Route signals to each output or both outputs.
- Includes power supply
- 1RU 19” rack mount case.
- Australian designed & assembled
|
|
New to the Redback mixer stable, this model incorporates six inputs which can be routed to 1 of 2 outputs or both as the installation requires. Inputs can be configured for either RCA line level signals or 3 pin XLR balanced mic signals. |
 |
A2232A NEW
|
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A4960 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4962 microphone transceiver which provides output to PA amplifier.
|
|
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
 |
A4962 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4960 microphone transmitter wall plates which connect to the local microphone.
|
|
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
 |
A4661 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
 |
A1720C NEW
|
|
- Custom tracks
- Inbuilt tone & phrase library
- 12-30V DC operation @ 300mA (switched output only operates at 24V+).
- Micro SD card included
- All connections made via screw terminals
- Tones conform to Australian standard
- Provision for voice over in evacuation mode
- Random play on triggers - if multiple MP3s in trigger folder, they will be played at random.
- Optional MP3 playback on trigger cancel (alternate mode only)
- Compact size: 120 x 70mm
|
|
The A 1720C is an MP3 based message player and tone generator designed for public address, security, customer direction or emergency evacuation announcements. |
 |
A2655 NEW
|
|
- All inputs top mounted for easy access
- Combo XLR and 6.35mm jack inputs on channels 1-6
- Bluetooth audio reciever
- 24 bit 48KHz DSP effects with preset adjustment and level
- Adjustable aux return level
- USB MP3 recording and playback
- LED VU meter
- Monitor & phones outputs
- Aux send and return
- Foot switch input
- 48V phantom power
|
|
A lightweight and compact USB powered mixer featuring 14 channels. Channels 1 to 6 are XLR/6.35mm combo sockets suitable for both mic and line level signals. |
 |
S4457 NEW
|
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
 Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Designed primarily for PA speaker line installations with two PA systems active in a building. Useful for applications where a dedicated evac speaker system is running along side a dedicated background music system. |
 |
A2275 NEW
|
|
- All wallplates assembled by Altronics are supplied with two facia clip on covers. These are designed to match your current decor. Simply clip on the desired cover after installation.
|
|
A combination of level control attenuator with 11 positions and 5 way audio source selector. |
 |
A1730 NEW
|
|
- Allow for up to 8 custom messages
- MP3 audio format for audio files
- Inbuilt tone & phrase library
- Provision for voice over in alert or evac mode
- Provision for cancel messages for all messages
- Triggers for remote activation of the messages
- Auxiliary level RCA output
- Suitable for any amplifier with an auxiliary input
- 9-30V @ 300mA DC operation
- Switched 9-30VDC output
- Micro SD card included
- Terminations via screw terminals
- Emergency Tones conform to Australian standard
- Stylish 1RU half rack case
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
This compact message player can be custom programmed with tones, messages or music for use in interactive displays, security, customer entry and emergency evacuation announcements. |
 |
A4510B NEW
|
|
- MP3 audio format for Bell, Prebell and Music timing outputs
- Random play of audio files for Prebell and Music activations
- Easy Windows based software timing event setup
- Daylight savings mode
- Local push button operation of Bell
- Switched 24VDC output for Bell, Prebell, Music and relay only (No audio) output activations
- Bell trigger for remote activation of the bell
- Pluggable screw terminal connections
- Auxiliary level output
- Battery backup of current time
- 24V DC operation
- Standard 2U 19” rack mount case
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
The A 4510B is an incredibly versatile, and easily programmed yearly timer housed in a convenient 2RU rack or desk mount chassis. The unit can be programmed for virtually limitless* timing events for each day of the year. |
 |
A2261B NEW
|
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
 |
A2262B NEW
|
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. They feature 11 position switches |
 |
A2272 NEW
|
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
 |
A2270 NEW
|
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators have been enclosed in a ABS Flange Mount Enclosure. |
 |
A4915 NEW
|
|
- 2 inputs to 1 output
- Suitable for mic or line signals
- Input 1 vox mutes input 2
- Separate controls for volume and vox sensitivity
- Vox operated 24V DC output for control of external devices
- Compact design
- 24V DC operation via 2.1mm DC jack (plugpack sold separately)
- Australian designed and manufactured
|
|
This compact 2 input mixer accepts either a line level signal or balanced microphone signal for each input. |
 |
A4658 NEW
|
|
- Simple in-line connection
- Provides additional power for long cable runs
- Aluminium case
- 24V DC power input (power supply included)
- Australian designed and manufactured
|
|
Designed to provide external power injection to the new A 4660 Redback Paging Console. |
 |
PC0456 NEW
|
|
|
|
5pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
 |
PC0446 NEW
|
|
|
|
3pin XLR microphone connector mounted horizontally on a Clipsal pro wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
 |
A1117 NEW
|
|
- Compact Class D stereo 2 x 15W (into 4Ω)
- Bluetooth 5.1 connectivity
- Upgrade your favourite speakers to Bluetooth wireless
- Includes mains power supply
- Excellent range and audio clarity
- Suitable for in-ceiling mounting
- Assignable bluetooth device name and password
|
|
This Bluetooth mini amplifier is a great way to add wireless connectivity to a new or existing pair of ceiling or wall speakers that aren't Bluetooth equipped. It offers Bluetooth 5.1 connectivity for excellent device range and audio performance, coupled with an efficient Class-D amplifier. |
 |
A4567C |
|
- This unit is designed for “loop in loop out” serial wiring to loudspeakers with a 47KΩ terminating resistor at the end of the line. Star wiring or tee offs are prohibited. Each loudspeaker requires a series connected 22µf bipolar capacitor for correct operation. A delay of 10 seconds is provided before registering a fault to minimise false alarms.
|
|
Specifically designed to monitor the condition of 100V line speaker systems in emergency paging and fire evacuation installations. Many large commercial installations have speaker circuits in excess of 250W. |
 |
C1064 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1063 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1062 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
C1061 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
 |
A4574A NEW
|
|
- Level controls for alert/evac, bell and voice over
- Front panel alert/evac/bell and cancel switches
- All tones MP3 based
- Alert/Evac Emergency tones can be configured for momentary or continuous operation
- 1U half rack cabinet
- Alert and Evac Tones conform to AS 1670.4 (Library included on Micro SD card)
- Compatible with fire indicator boards & break glass alarms
- Remote operation of alert , evac, bell tones & cancel.
- Local operation of alert, evac and bell
- MP3 based Alert and Evacuation Voice over message facility
- Bell chime facility
- Switched 24V DC outputs for override relays or strobes (outputs limited to 120mA)
- On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30 second increments.
- Switches from alert to evac after preset time.
- Auxiliary level output
- 10 year warranty
- Australian designed and manufactured
|
|
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. |
 |
A2518 NEW
|
|
|
|
This unit is designed to convert stereo audio signals into a summed mono line level RCA signal. |
 |
A4496 NEW
|
|
- Remote selection of input audio source
- Volume control of zone input
- Volume control of local input
- Mute function
- Zone Lockout
- Personal Identification Number (PIN) Menu Lockout Function
- 2 stage wall plate functionality Lockout
- Provision for input of local microphone or line level audio via A4931 or A4931V wall plates
- Cat5e connection to A4480B
- Powered from the A4480B
|
|
The A4496 wall plate allows remote selection of the A4480B zone input audio source and volume level (1 plate required per zone). |
 |
A2260SS NEW
|
|
- Designed & manufactured in Australia.
- Since 1974 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
A stainless steel version of our popular Redback 10W volume attenuator. Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A2516 NEW
|
|
- Frequency response: 20 Hz - 20kHz +/- 3dB
- Input level: 0.775Vrms
- Output level: 0.19Vrms (measured at 1kHz with volume control set to max).
- Maximum output level before distortion: +18dBm
- Note the RCA input sockets are in parallel
|
|
Unbalanced 10K Ohm 2 x RCA to balanced 600 Ohm 3 pin male XLR (or optional screw terminal connections) with level control. |
 |
A2515 NEW
|
|
- Frequency response: 20 Hz - 20kHz +/- 3dB
- Input level: 0.775Vrms
- Output level: 1.97Vrms (measured at 1kHz with volume control set to max).
- Maximum output level before distortion: +24dBm
- Note the RCA output sockets are in parallel
|
|
Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control (or optional screw terminal connections). |
 |
A2734 |
|
- BT 5.0 wireless audio receiver
- DAB+ digital tuner
- XLR & RCA outputs for connection to amplifier
- USB MP3 audio playback
- Anti-shock CD player
- Infra-red remote control
- 19” rack mountable housing
- 40 FM radio and 40 DAB+ presets station memories
- Direct access track controls on front panel
|
|
The Bluetooth CD / MP3 audio player is suitable for versatile PA applications (e.g. in theatres, pubs or waiting rooms) and offers special features, e.g. continuous repeat, random replay, MP3 replay of USB storage media and SD memory cards. |
 |
C2039 NEW
|
|
- Material/Colour: Flame retardant antistatic nylon, black
- Rated Power Taps: 5W/10W/15W/30W
- Power Tap Wiring: 5W Yellow, 10W Orange, 15W Red, 30W Brown, Black Common.
- Built-in Audio Transformer: 70V/100V, 5W/10W/15W/30W
- Effective Frequency Range: 300 Hz - 8000 Hz
- Ingress Protection Rating: IP66
- Ambient Temperature: -40 to +55°.
- Relative Humidity: 10% - 95%
- Input AC Resistance: 8±15%Ω
- Sound Coil DC Resistance: 6.4 ±7%Ω
- Explosion Proof Standard: EN IEC 60079-0:2018, EN 60079-1:2014, EN IEC 60079-7:2015/A1:2018, EN 60079-31:2014, EN 60079-14-2014
- Dimensions: 250Ø x 325D mm
- Weight: 4kg
|
|
C 2039 is an anti-static nylon material, anti-ultraviolet and durable explosion-proof speaker with ATEX / IECEx certification for dust and gas atmosphere. |
 |
A4262B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
These compact Class-D design amplifiers offer multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
 |
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |
 |
A4460 |
|
- 4 in, 8 out stereo
- Touchscreen & iOS/Android app control
- Four external MP3 triggers
- Six wallplate activated triggers (master only)
- Remote wallplate control
- Global function to send to all zones
- System cabling via Cat5e UTP.
- Suits all size power amps
- Local Bluetooth inputs
- Master plate can control & set up all zones
- 24V DC operation
|
|
Designed to distribute 4 stereo audio input sources to 8 stereo output zones, this system is ideal for use in function centres, hotels, meeting rooms and domestic homes etc. It sends audio sources from one room to another with total ease. |
 |
A4235A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- Overload limiting
- Over voltage limiting
- On demand fan cooling
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V ac / 24V dc operation
|
|
This compact 30W 1RU rack mount amplifiers is suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. Operates on 240V ac or 24V dc for battery backup operation. |
 |
A2387A NEW
|
|
- Pluggable screw terminal connections
- 300W total RMS continuous power handling
- Heavy duty transformer based impedance system protects against power loss
- Left and right channels are completely isolated for safe operation with any amplifier
- Quick connect terminals will accomodate 16AWG to 22AWG wire
- Can be connected to two different amplifiers via A/B switch
- Circuit breaker protected
|
|
The A2387A is a high-power, dual-source, autoformer based speaker selector. Dual source operation makes two different amplifiers/receivers drive selected speakers simultaneously. |
 |
A4660 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
 |
A2260A |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A4260B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
This compact Class-D design amplifier offers multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
 |
A4937 NEW
|
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Bluetooth 5.1 audio streaming receiver in-built
- 30m clear light of sight BT streaming range.
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music. |
 |
A4505C |
|
- MP3 for bell, prebell & music timing output.
- Emergency tones conform to AS 1670.4
- Random play of MP3 for prebell and music triggers.
- Easy PC based timing event setup
- Local & remote triggering of lockdown, fire and bell.
- Provision for connection to A4660 touchscreen paging console.
- MP3 voice over message (available in the lockdown and the fire cycle)
- Switched 24VDC outputs
- Pluggable screw terminal connections
- Auxiliary level output
- Battery backup of current time
- 24V DC operation
- 1RU 19” rack case
- Suitable for any amplifier with aux input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
A timed audio announcement, lockdown and fire alarm controller all housed in a convenient 1RU rack mount chassis. For scheduled announcements a total of 200 “event” switching times are available through the timing functions. |
 |
A4463 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant zone wall plates & main Redback units.
- Adjust custom labelling of zones and inputs on screen.
- Choose button colour theme.
- Fits standard double gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
These 7" touchscreen control wall plates allow for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
 |
A4461 |
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant zone wall plates & main Redback units.
- Adjust custom labelling of zones and inputs on screen.
- Choose button colour theme.
- Fits standard double gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
These 7" touchscreen control wall plates allow for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
 |
A4464 NEW
|
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant master wall plates & main Redback units.
- Fits standard single gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
This 4.3" touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
 |
A4462 |
|
- Simple touchscreen control selection of zone inputs and level control.
- Changes in selections are reflected on the relevant master wall plates & main Redback units.
- Fits standard single gang electrical wall box with mounting plate included.
- All glass front bezel for a stylish finish for any room.
- Adjustable screen sleep mode.
- Connects via economical Cat5e UTP cabling.
|
|
This 4.3" touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). |
 |
A4420C NEW
|
|
- 6 microphone and 2 line inputs
- All mic inputs are 3 pin XLR balanced
- Line inputs via twin RCA sockets
- Separate bass and treble tone controls
- Individual input and master volume controls
- Optional VOX muting of line inputs
- Optional phantom power for each mic input
- Microphone bass cut internally selectable
- Mic inputs routed via tone controls or bypassed
- 24VDC input
|
|
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. |
 |
A4435A |
|
- Four input channels
- SD card message player for audio announcements
- Individual level, bass and treble control on all inputs
- 3.5mm music input
- Adjustable input sensitivity on mic or line
- 24V DC battery back up terminals
- Four sets of closing contacts for message triggering
- 24V DC switched output
- Message active indicators
- Adjustable Vox sensitivity
|
|
This unique mixer features four input channels which are user selectable for either balanced mic, line or auxiliary use. It incorporates a four channel SD card based message player making it an excellent choice for retail, supermarkets and hardware stores. |
 |
A4500C |
|
- MP3 bell, prebell & music timing outputs.
- Emergency tones conform to AS 1670.4.
- Random play for prebell and music.
- Easy PC based timing event setup.
- Remote triggering of alert, evac and bell.
- Provision for connection to A4660 touchscreen paging console.
- Switched 24VDC out for bell, alert/evac.
- Pluggable screw terminal connections.
- Auxiliary level output.
- Battery backup of current time.
- 24V DC operation.
- Standard 1U 19” rack mount case.
- Suitable for any amp with an aux input.
- 10 Year Warranty
- Australian Designed and Manufactured
- Includes Power Supply
|
|
A weekly timer and evacuation controller all housed in a convenient 1RU rack mount chassis. A total of 200 “event” switching times are available through the timing functions. Each event can be set to turn on from 1 sec up to 24 hours. |
 |
A6531 |
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
 |
A6530 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal 7" touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
 |
A6541 NEW
|
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
 |
A6540 |
|
- User programmable buttons & icons
- Multiple screen pages (12 max)
- Tandem operation
- Event splash screens
- Icon library for commonly used buttons
- Infra-red control output
- RS-232 or RS-485 serial outputs
- PIR motion trigger
- Haptic & audible button feedback options
- U/UTP Cat5 cable connection
- Multi-command macros
- IR learning facility
- SD card configuration upload
- Easy to program
|
|
This universal touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. |
 |
C2186 NEW
|
|
- Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts
- SPL 1W @ 1m: 91dB @ 1kHz ±2dB
- Freq response: 90Hz - 20kHz
- Grille: Steel
- Ceiling cutout: 195mm Ø
- Mounting depth: 100mm
- Terminal type: 2 way screw terminal
|
|
The C2186 is a 165mm (6.5") dual cone speaker with a 5W transformer. |
 |
A4495 |
|
- Remote selection of input audio source
- Volume control of zone input
- Volume control of local zone input
- Mute function
- Zone Lockout
- Personal Identification Number (PIN) Menu Lockout Function
- 2 stage wall plate functionality Lockout
- Provision for input of local microphone or line level audio via A4931 or A4931V wall plates
- Cat5e connection to A4480B
- Powered from the A4480B
|
|
The A4495 wall plate allows remote selection of the A4480B zone input audio source and volume level (1 plate required per zone). |
 |
A2696A |
|
- High quality 430mm metallic cabinet
- Aluminium front panel
- Wifi and Ethernet RJ45 connection
- DAB+/DAB/FM/Bluetooth
- 2.4" TFT display
- External wireless antenna for extended range - RCA analogue out
- Optical and coaxial output
- 6.35mm stereo jack
- Remote control
|
|
Upgrade your digital radio experience with this Internet Radio with Wi-Fi and DAB+. The tuner is an outstanding digital radio with a premium design and finely tuned audio performance. |
 |
C8915A |
|
|
|
Soft protection pouch for beltpack (lavalier) transmitter units. |
 |
A4285C |
|
- VU meter on LCD screen
- Output peak limited
- Multi-stage thermally cued fan cooling
- 2U 19" rack mount
- Tape record out terminals
- Remote volume facility
- Optional alert, evac & chime tone generator (A 4573)
- Vox activated 24V dc output
- 6 inputs with 3 pin XLR or 2 x RCA sockets
- Phantom powering available on all inputs
- Three levels of priority
- Option for mic/line to operate vox muting on inputs 1 to 3
- Push to talk (PTT) terminals on rear panel
- Bass and treble tone controls
- Power amp line out connector
- Terminals for 100V line, 70V line and 4 - 16Ω loads
- 240V ac or 24V dc power operation
- Thermal & fuse overload protection
- Built in short circuit protection
- 300mA trickle charge facility for 24V dc batteries
- Master volume can be configured as pre or post line out
|
|
Engineered for professional PA installations, the A 4285B conservatively delivers 250W RMS power. Including three levels of input priority, bass and treble controls and phantom powering capability enable unparalleled flexibility for a wide scope of applications such as schools, shopping centres, workshops, mine sites and office buildings. |
 |
A4275C |
|
- Very low noise and distortion
- Thermal overload protection
- Thermally cued forced fan cooling
- Protect Mode
- 4 levels of priority/Vox muting
- LCD display of amplifier status
- Minimum and Maximum Master Volume Over-ride
- Minimum and Maximum Remote Volume Over-ride
- USB keyboard interface for labelling of inputs and installer contact details. • 6 inputs configurable as balanced microphone or line
- Music Input on front panel
- Adjustable line level sensitivity
- 70V, 100V and 4-16ohm outputs
- 240V AC or 24V DC operation
- 300mA Backup Battery charging
- Phantom power (on microphone inputs)
- Tape out (Dual RCA)
- Pre-amp send and return connections (RCA)
- Balanced line output (3 pin male XLR)
- Remote Volume option
- 24V switched output via PTT microphone (not supplied)
- 19” Rack Mount (2 unit).
- Optional Alert/Evac tones with voice-over message (via A 4573 module)
- Optional MP3 input with remote control (via A 2711 module)
|
|
Engineered for professional PA installations, the A 4275C conservatively delivers 125W RMS power. Including three levels of input priority, bass and treble controls and phantom powering capability enable unparalleled flexibility for a wide scope of applications such as schools, shopping centres, workshops, mine sites and office buildings. |
 |
CF2050W |
|
- Designed to meet AS ISO7240.24:2018 for fire/evac installations
- Requires no external EQ for AS ISO7240.24:2018 fire systems
- Twist lock cap reduces installation time
- UV stabilised ABS construction
- Excellent sound dispersion
- IP66 rated for weather resistance
- EWIS line monitoring system compatible
- Two cable glands supplied for loop in, loop out wiring
- Stainless steel mounting hardware
- 5 year warranty
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot horn speaker, designed to save installers time and money. |
 |
CF2050B |
|
- Designed to meet AS ISO7240.24:2018 for fire/evac installations
- Requires no external EQ for AS ISO7240.24:2018 fire systems
- Twist lock cap reduces installation time
- UV stabilised ABS construction
- Excellent sound dispersion
- IP66 rated for weather resistance
- EWIS line monitoring system compatible
- Two cable glands supplied for loop in, loop out wiring
- Stainless steel mounting hardware
- 5 year warranty
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot horn speaker, designed to save installers time and money. |
 |
A2237 |
|
|
|
This 40W volume control is designed for 100V line speaker systems. The volume control is fitted to a black Clipsal Pro Series wall plate which has been specifically designed for commercial building installations. |
 |
A2236 |
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A2233 |
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A2232 |
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A2267A |
|
|
|
New models supplied with two facia covers to suit your decor.
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
 |
A4450 |
|
- 4 mic/line inputs to 4 zones
- Operates as a matrix mixer or source switcher
- Touchscreen & iOS/Android app control
- RS-485 control via rear panel serial adapter connection
- Adjustable aux level 100mV/1V
- Adjustable balanced mic/line level 3mV/0.7V
- LCD for easy selection of sources to zones
- System cabling via Cat5e UTP.
- Zone and input custom labelling
- Adjustable volume for each input to output selection
- Master & zone source selection wallplates
- 24V DC operation
|
|
This Redback 4x4 audio source matrix system is feature packed yet simple to set up and use it features 4 inputs, selectable to up to 4 zones making it ideally suited to gyms, cafes, restaurants, small clubs and function centres. |
 |
C0957A |
|
- Durable extruded aluminium housing.
- 22uf bipolar line monitoring capacitor
- Attractive slimline construction.
- Fitted with high specification drivers for exceptional speech & music reproduction.
- Suitable for accurate, “long throw” applications.
- Water protected to IEC529 IP66, suitable for indoor and outdoor use.
- Durable aluminium alloy multi bracket (tested up to 1500 kgf).
|
|
These stylish, compact 100V line column speakers utilise multiple 3.5” (89mm) woofers and high power dome tweeters to produce superb clarity for both music and speech applications |
 |
CF2050G |
|
- Designed to meet AS ISO7240.24:2018 for fire/evac installations
- Requires no external EQ for AS ISO7240.24:2018 fire systems
- Twist lock cap reduces installation time
- UV stabilised ABS construction
- Excellent sound dispersion
- IP66 rated for weather resistance
- EWIS line monitoring system compatible
- Two cable glands supplied for loop in, loop out wiring
- Stainless steel mounting hardware
- 5 year warranty
|
|
Designed to meet AS ISO7240.24:2018. Our first One-Shot horn speaker, designed to save installers time and money. |
Redback
