Redback
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Windsock to suit C0375C0346 |
| Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm | ||
 |
10mm Pencil Microphone WindsockC0345 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
40mm Ball Microphone WindsockC0344 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
27mm Medium Microphone WindsockC0342 |
| Used to negate breath noise and eliminate wind or breath “pop”. | ||
 |
20mm Pencil Microphone WindsockC0340 |
| Used to negate breath noise and eliminate wind or breath 'pop' | ||
 |
8mm Windsock To Suit C8911AC0338 |
| This windsock is designed specifically to suit C8911A headband microphone and is sold as both a spare part and as a generic unit. | ||
 |
12mm Lapel Microphone WindsockC0337 |
| Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit. | ||
 |
CB Type Microphone Mounting ClipC0336 |
| Microphone clip to suit the C 0333/C 0334 / C 0335 range of CB microphones. | ||
 |
CB Type Balanced Microphone With Bare EndsC0335 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord 2m (including switch pair). Suitable for CB''''s, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz | ||
 |
5 Pin XLR CB Type Balanced MicrophoneC0334 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
CB Type Microphone With Bare EndsC0333 |
| Low impedance, 500 Ohm, omni-directional, dynamic microphone with curly cord (including switch pair). Suitable for CB's, radio transceivers etc. Supplied complete with mounting clip.Tailored frequency response 300Hz- 8KHz (C 0334), 300Hz - 6kHz (C 0335) | ||
 |
1 In 4 Out 150W Audio TransformerA2370 |
| Designed for installations using several pairs of 8Ω speakers connected to one amplifier. Adjustable impedance protection allows multiple pairs of speakers to be connected without overloading the amplifier. Each pair of speakers is wired back indivi | ||
 |
Attenuator Volume Control 100W 100V Line W...A2339 |
| This controller has been designed to install to a double electrical flush box or wall mounting block. Massive 100 watt capacity available. 11 settings plus off. Fitted with a 24V override relay. 2 Year Warranty | ||
 |
Large Heavy Duty Speaker Stand With Lockin...C0523 |
| Lightweight aluminium construction and collapsible for easy transportation. Anti-sway bars on legs provides stability. Suit 35mm top hats for most popular commercial equipment. Adjusts from approx 1.4 to 3 metres with a payload of 50kg. Now includes | ||
 |
Speaker Grille Fixing Clip Pk 12C0830 |
| Designed for securing the speaker to the grille. Simply push down onto the locating posts. Quick and easy installation. Suits C 0805 and C 0815 Super Slimline speaker grills. Pk 12 | ||
 |
15W 100V Line White Ball Pendant Ceiling S...C1050 |
|
| Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within t | |
 |
15W 8 Ohm Weather Proof IP54 Plastic PA Ho...C2015A |
|
| PA horn speaker suitable for general public address, CB extension speakers, boats and alarms etc. White PVC construction. Swivel bracket included. Flare dimensions: 135mm. | |
 |
200mm (8") 5W 100V Twin Cone EWIS PA Drive...C2112C |
|
| This custom designed speaker and transformer combination has been specifically engineered to ensure a wide frequency range and dispersion angle, plus a high sound pressure level (SPL) ensuring excellent music and speech intelligibility; which is h | |
 |
250mm (10") 120W Woofer PECC SpeakerC3026 ROHS |
|
| This series of loudspeakers feature rubber surrounds and high rigidity, fibre impregnated poly emulsion coated cones (PECC). | |
 |
250mm (10") 60W Woofer Polypropylene SpeakerC3065 ROHS |
| 250mm (10") 60W woofer polypropylene speaker. | ||
 |
Balanced To Unbalanced Converter XLR-RCAA2513 |
| Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Steps up input signal by factor of 16, ie 20mV in = 320mV out. | ||
 |
15W 8 Ohm Weather Proof Plastic PA Horn Sp...C2014 |
| 8 ohm, 15 watt, PVC weatherproof PA horn. Suitable for security, PA, extension speaker, etc. Includes swivel mounting bracket. Fits S 5462 siren box. | ||
 |
25mm (1") 80W High Power Tweeter SpeakerC3004 |
|
| Ideal for high fidelity applications requiring high power. Aluminium facia panel provides a stylish finish to any multi channel speaker system. | |
 |
200mm (8") 15W 100V Coaxial 2 Way EWIS Fas...C2128 ROHS |
|
| The C 2128 is a 200mm (8") high performance 45W coaxial speakers fitted with a 15W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' | |
 |
165mm (6.5") 5W 100V Twin Cone Fastfix Cei...C2123 |
|
| The C 2123 is a 165mm (6.5") dual cone speaker with a 5W transformer. These stylish, high performance, architecturally unobtrusive speaker/grill combinations can be painted to match decor. Super easy to install with a 'Flip-Lock' mounting system. Typical |
Backed by an industry leading 5 Year Speaker Performance Warranty.
