|
Description |
Downloads |
Specs |
Ordering |
|
|
C0992 |
|
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion.
- High performance large voicecoil diameter
- Wide frequency response
- Titanium diaphragm compression driver
|
|
Available in sizes from 8" to 15", these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind. |
|
C0993 |
|
- Bluetooth audio
- FM radio
- USB playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- 4 rigging points
- Built-in MP3 player with USB and SD card inputs
|
|
Instant, powerful PA sound! An all in one portable PA sound system with amplifier that sets up in just seconds - no expertise required. Just plug into 240V power, switch it on and connect a mic. USB playback makes it easy to play your favourite tunes. Great for clubs, sports events, fetes, carnivals and bingo nights - any crowd up to 500 people! |
|
C0993A |
|
- Bluetooth wireless audio in built
- USB/SD card playback with MP3 module.
- Rugged moulded ABS construction
- Standard magnet-driven woofer for low distortion
- High performance large voice-coil diameter
- Wide frequency response
- Titanium diaphragm compression driver
- 4 inbuilt rigging points allow the units to be suspended using eye bolts
- Inbuilt top hat mount and carry handle
- Mic Level input <5mV, Line Output 250mV
|
|
This 10 Inch 2 Way Powered PA Speaker with MP3/Bluetooth/FM/USB is housed in rugged wedge shaped nylon fibre and ABS moulded cabinet. Designed with portability in mind the cabinets include an inbuilt carry handle. |
|
C0994 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
|
C0995 |
|
- 2 x Balanced XLR mic input
- 1 x Balanced 6.35mm jack mic input
- TRS 6.35mm stereo jack line input
- USB input for digital audio playback
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- Built-in MP3, WAV, WMA file player with USB input
|
|
A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and a thumbdrive. |
|
C1005 |
|
|
|
Black powdercoated steel bracket specifically designed to suit the C1004A club speaker. Comes included with the required hardware to mount the speaker to the bracket. |
|
C1050 |
|
- Power Taps: 5, 10 & 15 W
- SPL 1W @ 1m: 91dB
- Freq. Resp.: 80Hz - 20kHz
- Weight: 1.8kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 4M
- Overall Diam.: 190mm approx.
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within t |
|
C1051 |
|
- Power Taps: 5, 10 & 15 W
- SPL 1W @ 1m: 91dB
- Freq. Resp.: 80Hz - 20kHz
- Weight: 1.8kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 4M
- Overall Diam.: 190mm approx.
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within t |
|
C1055 |
|
- Power Taps: 8Ω, 5, 10, 15, 20, 30W
- SPL 1W @ 1m: 91dB
- Freq. Resp.: 100Hz - 20kHz
- Weight: 3kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Overall Diam.: 260mm approx.
- Power Tap Cable Colours:
- Red: Common
- White: 30W
- Blue: 20W
- Yellow: 15W
- Green: 10W
- Brown: 5W
- Black: 8 Ohm
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within th |
|
C1055A |
|
- Power Taps: 8Ω, 10, 15, 20, 30W
- Impedance: 333Ω, 500Ω, 667Ω, 1kΩ & 8Ω
- SPL 1W @ 1m: 91dB
- SPL Full Power @ 1m: 106dB
- Freq. Resp.: 100Hz - 20kHz
- Weight: 3kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Overall Diam.: 260mm approx.
- IP Rating: IEC529 IP55
- Power Tap Cable Colours:
- Red: Common
- White: 30W
- Blue: 20W
- Yellow: 15W
- Green: 10W
- Brown: 8 Ohm
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
|
C1057 |
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Dimensions: Ø185mm x 230mm
- IP Rating: IP45
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
|
C1058
|
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Dimensions: Ø185mm x 230mm
- IP Rating: IP45
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
|
C1060 |
|
- 100V line or 8 Ohm operation
- Wide frequency response
- High speech intelligibility
- Fitted with 2m cable
- Stylish modern finish
- 6.5” coaxial speaker
- Ideal for BGM and paging requirements
|
|
A stylish pendant speaker for installations requiring a high power SPL output. Ideally suited to high raked, suspended, concrete or exposed ceilings. Installation requires a single fixing with connection concealed within the ceiling rose provided. Fitted with 6.5" coaxial 2 way driver and high efficiency transformer. |
|
C1060A |
|
- 100V line or 8 Ohm operation
- Wide frequency response
- High speech intelligibility
- Fitted with 4m cable
- Stylish modern finish
- 6.5” coaxial speaker
- Ideal for BGM and paging requirements
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. |
|
C1061 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
|
C1062 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 112 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP56 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 60W / 30W / 15W / 7.5W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 5.25-inch woofer and 1-inch tweeter for PA sound projection. |
|
C1063 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
|
C1064 NEW
|
|
- Durable and compact of cabinet PA mounting speaker.
- Industrial powdercoated steel bracket with stainless steel hardware.
- Full range of sound through 2-way driver.
- Long throw speaker system with maximum SPL at 116 dB.
- Screw terminals for loop in, loop out connection in 100V line systems.
- Extra cable gland and knock out provided for loop in, loop out wiring.
- 8 Ohm selection on power tap switch.
- IP55 moisture and dust protection rating.
- Superb sound quality for both music and speech intelligibility.
- Various power switch tapping 150W / 75W / 38W.
- Convenient U-bracket installation.
|
|
This all weather long throw PA speaker features a two-way driver, including 8-inch woofer and 1-inch tweeter for PA sound projection. |
|
C1065 |
|
- Rated power: 240W @ 4Ω
- Power taps: 60, 120, 240W
- Max SPL: 112dB
- Freq response: 30Hz - 15Khz
- Weight: 7.5kg
- Dimensions (mm): 367 x 330Dmm
|
|
High power commercial grade 10" subwoofer for providing additional low end response to foreground music and hi-fi applications. |
|
C1070 ROHS
|
|
- Driver Size: 165mm (6.5") coaxial
- Power Taps: 7, 15 & 35W
- SPL 1W @ 1m: 92dB
- Frequency Resp.: 80Hz - 16kHz, ±6dB
- Coverage: 180° Vertical, 360° Horizontal
- Weight: 4kg
- Material: Structural Polystyrene
- Operating temperature: -25°C to 70°C
- Dimensions: 380W x 290H mm
|
|
Now supplied with 22uF capacitor for line monitoring, plus screw terminals for easy installation. |
|
C1075 ROHS
|
|
|
|
Flush mount ceiling bracket for C 1070 |
|
C1520 ROHS
|
|
- Tough UV stabilised high impact ABS construction
- Durable powdercoated aluminium mounting bracket
- Stainless steel grille & fixings
- Exceptional music and speech reproduction
- Selectable power taps
- Uses a high efficiency driver and line transformer
- Suitable for indoor or outdoor use
- Includes 7-core cable for easy power tap selection
- Fitted with supervisory capacitor for line monitoring.
|
|
The REDBACK PA sound projector speaker is made from strong UV stabilised ABS plastic with a perforated metal grill. It is designed for use in 100V line distributed systems. Sound projectors offer a wide dynamic range making them ideal for both paging and background |
|
C1522 ROHS
|
|
- Extruded aluminium enclosure with industrial powdercoating.
- Dual 10 watt weather resistant twin cone drivers.
- IP65 ingress protection rated
- Aluminium grille & bracket
- Exceptional music and speech reproduction
- Selectable power taps
- Uses a high efficiency driver and line transformer
- Suitable for indoor or outdoor use
- Includes 5-core cable for easy power tap selection
- Fitted with supervisory capacitor for line monitoring.
|
|
This bi-directional PA speaker is manufactured from a heavy duty aluminium extrusion. It is fitted with two high efficiency 5" speaker drivers offering exceptional speech intelligibility. Housing grille are finished in industrial grade white powdercoat. |
|
C2000A ROHS
|
|
- Input Power: 5 Watts RMS
- Max Input Power: 10 Watts
- Impedance: 8Ω
- Resonant Frequency: 80Hz
- Frequency Response: 80Hz - 18kHz
- SPL (1w @ 1m): 92dB
- Connection: 5.4mm flat spade terminal
|
|
Designed primarily for PA and background music applications. Magnet includes transformer mounting holes at 51mm.
Diagonal mounting hole centres at 195mm. |
|
C2005 |
|
- Impedance: 8Ω ± 15% at 250Hz
- V.C Resistance: 6.8 ±10%Ω
- Resonance Frequency: 50Hz ± 20%
- Power Handling (Rated Power): 25 Watts
- Power Handling (Peak Power): 50 Watts
- Sensitivity: 90 ± 3dB 1W/1M Frequency At 200/400/600/800/1000 Hz
- Frequency Range: 50Hz-20KHz deviation ±10db
- Extraneous Noise Test: 12.6V RMS (Sine Wave)
- Magnet Dimensions: 100x60x20 mm Ferrite
- Weight: 1.8kg
|
|
These drivers employ polypropylene cones with a foam edge down rolled. This, coupled with a centrally mounted tweeter and midrange assembly, gives an excellent overall performance. Ideal for high performance, high power PA installations, foreground music |