|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4260B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
This compact Class-D design amplifier offers multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
 |
A4262B NEW
|
|
- Mixer amplifier with in-built SD/USB/FM tuner/Bluetooth music source
- 85% efficient class-D power performance
- Low power consumption & heat generation
- Compact 1RU case
- Bass & treble control
- Front panel mic input
- Protection circuitry
- LED indicators for signal, peak, protection and power
- Selectable 100V line/4-16Ω output
- Mic/Line/Phantom Power options on Mic 1-4
- 24V DC battery backup power input
- Emergency priority input (Mic 1)
- Adjustable VOX muting
|
|
These compact Class-D design amplifiers offer multi source mixing plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. |
 |
A4250A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- Phantom power
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
 |
A4230A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- Phantom power
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V ac / 24V dc operation
- Australian designed & manufactured
|
|
Utilising only 1RU of rack space, this range of Redback power amplifiers is available in three power ratings of 30W, 60W and 100W RMS. They lend themselves perfectly for installations requiring individual zone amplifiers. |
 |
A4255A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- 3.5mm Jack Input (Front Mounted)
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
 |
A4235 |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- Overload limiting
- Over voltage limiting
- On demand fan cooling
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V ac / 24V dc operation
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation.
All models include a choice of |
 |
A4235A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- Overload limiting
- Over voltage limiting
- On demand fan cooling
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V ac / 24V dc operation
|
|
This compact 30W 1RU rack mount amplifiers is suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. Operates on 240V ac or 24V dc for battery backup operation. |
 |
A4245A |
|
- Compact 1RU 19” rack mount design
- Balanced mic or line input
- 100V line output
- VOX muting
- Phantom power
- Four auxiliary inputs
- 3.5mm Jack Input (Front Mounted)
- Overload limiting
- Over voltage limiting
- On demand fan cooling (60W and 100W versions only)
- Over temperature shut down protection
- Dual input connectors
- Variable input sensitivities
- 240V AC / 24V DC operation
- Australian designed & manufactured
|
|
These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V ac or 24V dc for battery backup operation. |
 |
C2070 |
|
- Power rating: 30W RMS
- Power taps (100V): 15 & 30W
- SPL 1W @ 1m: 100dB
- SPL Max @ 1m: 115dB
- Frequency response: 130Hz - 18kHz
- Dimensions: ≈360W x 165H x 275D mm
- Colour: Grey
- Weight: ≈3.1kg
- Connection details:
- Black Common
- White 30W tap (330 ohms)
- Green 15W tap (670 ohms)
|
|
A high performance weatherproof music horn for use in installations requiring a high output speaker for BGM programming and paging playback. |
 |
C6110 |
|
- Rated power: 30W RMS
- Max power: 60W
- Impedance: 8Ω
- Freq response: 1.5kHz-20kHz
- Sensitivity 1W @ 1m: 103dB
- Voice coil diameter: 34.5mm
- Magnet weight: 567g
|
|
This super-high efficiency compression driver is perfect for PA use. |
 |
A2698A |
|
- DAB+ Digital Tuner / decoder.
- FM Radio Tuner.
- Bluetooth Player for pairing with handheld devices (phones, tablets etc).
- Station Presets (10 for DAB+, 10 for FM) from remote control.
- Remote control with Mute button and Bluetooth transport controls.
- DLS and RDS enabled.
- Autoscan tuning feature for both DAB+ and FM (Seek).
- Jog wheel for volume control and menu navigation and function execution.
|
|
Experience the crystal clear signal quality that digital radio can provide by using this compact hi-fi component style DAB+/FM tuner. It is an ideal replacement for your non-DAB+ analog hi-fi or home theatre receiver. |
 |
A2696A |
|
- High quality 430mm metallic cabinet
- Aluminium front panel
- Wifi and Ethernet RJ45 connection
- DAB+/DAB/FM/Bluetooth
- 2.4" TFT display
- External wireless antenna for extended range - RCA analogue out
- Optical and coaxial output
- 6.35mm stereo jack
- Remote control
|
|
Upgrade your digital radio experience with this Internet Radio with Wi-Fi and DAB+. The tuner is an outstanding digital radio with a premium design and finely tuned audio performance. |
 |
C0375 |
|
- Impedance: 100Ω
- Sensitivity: -58dB ± 3dB
- Frequency response: 70Hz - 15kHz
- Cable Connection: Mini XLR
- Length: 330mm
- Polar pattern: Cardioid (unidirectional)
- Voltage: 11 - 52 Volts DC
|
|
An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock |
 |
C0357 |
|
- Uses the isolated voltage-boosting technology to effectively prevent the ground signal interference
- The built-in-low pass filter circuit design allows you to fully filter out the interference noise from the external audio equipment
- Soft start function to avoid the impulsive sound when boosting the device
- Uses two sets of balanced power supply, to balance the input and output signals which in turn makes the voltage balanced and stable
|
|
A compact single channel phantom power supply with 3 pin XLR female balanced input and 3 pin XLR male balanced 48V output.
Includes power supply.
Size: 88W x 47H x 92Dmm |
 |
Q2007 NEW
|
|
- Suitable for 50V, 70V and 100V line speaker systems up to 5kW
- Also suitable for measuring low Impedance speaker loads of 4 -16Ω
- OLED display shows Impedance and Wattage of the load
- 1Ω to 20KΩ test range
- Auto ranging
- Display accuracy +/-10%
- Push button operation
- System Check Mode (20, 60 or unlimited minutes)
- 5V Rechargeable Lithium Polymer internal battery
- Low battery indication
- Buzzer and Haptic feedback option via Menu access
- USB Charging lead supplied
- Silicon Test Leads supplied
- Soft Carry Case Included
- Rugged yet easy to hold compact hand held case
|
|
An absolute necessity for all PA system installers. This impedance meter for ‘dummies’ designed and manufactured by Altronics calculates and displays speaker loads in watts. Lithium rechargeable version. |
 |
S0088 |
|
- Events triggered by closing contact
- Event time and date recorded
- Power ON time and date recorded
- 24V DC switched output
- Adjustable output ON Time delay
- Adjustable output
- Event count
- Battery Backup (Time only)
- Micro SD card supplied
- CR2032 backup battery supplied
- 24V DC operation
- Supplied with 24V DC plugpack
|
|
Allows you to count the number of instances of a pair of closing contacts. Event times and dates are recorded to the internal Micro SD card for easy review. |
 |
A1715 |
|
- Four MP3 audio messages available
- Micro SD Card storage of MP3 files (supplied)
- Stereo Dual RCA output
- Remote triggering of MP3 playback
- Manual playback of MP3 files
- 24V DC operation
- Supplied with 24V DC plugpack
|
|
The A 1715 is an MP3 based message player, housed in a convenient DIN rail housing. It has four independent contacts for remote triggering
of the four available MP3 audio files. |
 |
C0383 ROHS
|
|
- Polar Pattern: Unidirectional
- Housing Material: Zinc Diecast
- Impedance: 600 Ohm
- Sensitivity: -72dB ±3dB
- Frequency Response: 50Hz - 15kHz
|
|
This balanced microphone has a specially designed grill that can withstand a drop impact without losing its shape. The tough zinc diecast housing has an inbuilt 3 pin XLR male connector and on/off switch. It is supplied complete with 5m twin shielded bala |
 |
C0448 |
|
 Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
 |
CB0448 |
|
- Designed & manufactured in Australia.
- Since 1976 Redback public address products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Dual 3pin XLR microphone connectors mounted horizontally on a dual face wall plate. "One-Shot" version with screw terminal connections for quick and easy connection on site. |
 |
A2704B |
|
- IR remote control
- Dual outputs
- Dual AM & FM analogue aerial inputs
- Rear mounted level controls
- 40AM/60FM presets per tuner
- Mono/stereo selector
- RS-232 control
- PLL synthesised tuner
- LCD readout
- 240V AC operation
|
|
This dual tuner is ideal for multi zone audio systems requiring separate programming in each zone. This compact 1RU device contains two individual tuners utilising Phase Locked Loop (PLL) synthesised circuitry to ensure excellent frequency stability. |
 |
A6514 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
 Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
These compact modules are designed to remotely alter the volume of any low level signal source over serial control. |
 |
C0354 |
|
- Impedance: 500Ω balanced, dynamic
- Sensitivity: -80dB ±3dB
- Frequency response: 60Hz - 12KHz
- Length: ≈460mm
- Polar pattern: Cardioid (unidirectional)
- Switch: Momentary PTT
|
|
A high performance dynamic microphone with in-built PTT switch in the head for paging systems. Complete with flexible gooseneck and built in 3 pin male XLR connector, it is ideal for paging consoles and general announcing requirements in factories, warehouses, food outlets and venues. |
 |
C0373 |
|
- Insert: Dynamic
- Impedance: 500 Ohm balanced
- Sensitivity: -77dB ±3dB
- Frequency Response: 100Hz - 12kHz
- Length: 420mm
- Directivity: Unidirectional (Cardioid)
|
|
This microphone features outstanding speech intelligibility, feedback rejection and user sound insolation. Complete with flexible gooseneck and built in 3 pin male XLR connector, this is ideal for lecterns, custom paging consoles, church pulpits and some |
 |
C0363 |
|
- Impedance: 500Ω
- Sensitivity: -76dB ±3dB
- Frequency Response: 100Hz-10KHz
- Length: ≈325mm
- Directivity: Unidirectional
|
|
This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It's screw base is suitable for mounting on equipment or permanent desk mounting . The slimline design of this mic makes it id |
Redback