|
Description |
Downloads |
Specs |
Ordering |
|
 |
A1720C NEW
|
|
- Custom tracks
- Inbuilt tone & phrase library
- 12-30V DC operation @ 300mA (switched output only operates at 24V+).
- Micro SD card included
- All connections made via screw terminals
- Tones conform to Australian standard
- Provision for voice over in evacuation mode
- Random play on triggers - if multiple MP3s in trigger folder, they will be played at random.
- Optional MP3 playback on trigger cancel (alternate mode only)
- Compact size: 120 x 70mm
|
|
The A 1720C is an MP3 based message player and tone generator designed for public address, security, customer direction or emergency evacuation announcements. |
 |
A2655 NEW
|
|
- All inputs top mounted for easy access
- Combo XLR and 6.35mm jack inputs on channels 1-6
- Bluetooth audio reciever
- 24 bit 48KHz DSP effects with preset adjustment and level
- Adjustable aux return level
- USB MP3 recording and playback
- LED VU meter
- Monitor & phones outputs
- Aux send and return
- Foot switch input
- 48V phantom power
|
|
A lightweight and compact USB powered mixer featuring 14 channels. Channels 1 to 6 are XLR/6.35mm combo sockets suitable for both mic and line level signals. |
 |
A4476 |
|
- Remote preset selection
- Cat5e connection
- LCD indicates presets available
|
|
The A4476 wallplate is used to provide local access to presets programmed into the A4480B. |
 |
C0991A |
|
- Bluetooth audio
- FM radio
- USB playback
- Rugged moulded ABS construction
- Standard magnet-driven woofer for low distortion
- High performance large voice-coil diameter
- Wide frequency response
- Titanium diaphragm compression driver
- 4 inbuilt rigging points allow the units to be suspended using eye bolts
- Inbuilt top hat mount and carry handle
- Mic Level input <5mV, Line Output 250mV
|
|
This 200mm 8 Inch 2 Way Powered PA Speaker MP3/BT/FM/USB is housed in rugged wedge shaped nylon fibre and ABS moulded cabinet. |
 |
C8884 |
|
- Multilevel high and mid frequency narrowband filters
- Advanced noise detection and control
- Tone key linked identity to reduce interference
- Operating frequencies 520 / 524 MHz
- RF signal presence indicator LEDs for channels A and B
- Range of up to 60m in ideal conditions open air
- 6.35mm unbalanced line mix output
- 3-pin balanced XLR mic output for channels A and B
- Screen shows parameters for both channels
- Plug pack included
- 4 x AA batteries included
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 1/2 rack mount cabinet is fitted with 2 channel fixed frequency wireless receiver. |
 |
A4935 |
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier. |
 |
CL8893D NEW
|
|
- USB rechargeable with internal lithium battery
- Can be used with a range of Redback mini XLR headsets and lapel microphones
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
|
|
Wireless lavalier beltpack 700 channel transmitter ideal for use with the Redback® 700 channel receiver unit (C8890D). |
 |
C1058
|
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Dimensions: Ø185mm x 230mm
- IP Rating: IP45
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
 |
A4960 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4962 microphone transceiver which provides output to PA amplifier.
|
|
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
 |
A4598 |
|
-
 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A 4595A. All switches have safety covers to prevent accidental triggering. If a tone is triggered by the main unit or a paging console the corresponding switch on the wall plate will illuminate. |
 |
A4581 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
 Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Allows the A4565A & A4500B alert/evac units to be activated remotely. Featuring alert, evacuation and cancel buttons with protective "flip up" covers to prevent accidental operation. |
 |
A4599 |
|
- Allows remote activation of the A4505 Controller.
- Connection is made via Cat5e cable up to a maximum range of 300m.
- Protective “flip up” covers. to prevent accidental operation.
- Dual Facia covers included.
- Fits standard electrical wall boxes.
|
|
Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. |
 |
A4581V |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4581V wall plate allows remote triggering of the Alert, Evacuation and Bell tones and the cancel function of the A4565A Alert/Evacuation Controller. |
 |
A4598V |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A4595A. |
 |
A4599V |
|
- Allows remote activation of the A4505 Controller.
- Connection is made via Cat5e cable up to a maximum range of 300m.
- Protective “flip up” covers. to prevent accidental operation.
- Dual Facia covers included.
- Fits standard electrical wall boxes.
|
|
Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. |
 |
C2090 |
|
- Power taps: 7.5, 15, 30, 60W
- SPL 1W @1m: 103dB
- Max SPL @1m: 120dB
- Frequency response: 340Hz - 10kHz
- Dimensions (mm): ≈146Ø x 227D
- Weight: ≈2.7kg
|
|
These high power public address speakers are ideal for PA installations with very high ambient noise levels, such as in mine sites, industrial plants, large factories and workshops. The enclosure is surprisingly compact for easy mounting. |
 |
A4915 NEW
|
|
- 2 inputs to 1 output
- Suitable for mic or line signals
- Input 1 vox mutes input 2
- Separate controls for volume and vox sensitivity
- Vox operated 24V DC output for control of external devices
- Compact design
- 24V DC operation via 2.1mm DC jack (plugpack sold separately)
- Australian designed and manufactured
|
|
This compact 2 input mixer accepts either a line level signal or balanced microphone signal for each input. |
 |
C1522 ROHS
|
|
- Extruded aluminium enclosure with industrial powdercoating.
- Dual 10 watt weather resistant twin cone drivers.
- IP65 ingress protection rated
- Aluminium grille & bracket
- Exceptional music and speech reproduction
- Selectable power taps
- Uses a high efficiency driver and line transformer
- Suitable for indoor or outdoor use
- Includes 5-core cable for easy power tap selection
- Fitted with supervisory capacitor for line monitoring.
|
|
This bi-directional PA speaker is manufactured from a heavy duty aluminium extrusion. It is fitted with two high efficiency 5" speaker drivers offering exceptional speech intelligibility. Housing grille are finished in industrial grade white powdercoat. |
 |
C2059 |
|
- Power Taps: 5, 10, 20, 30 & 40W
- SPL 1W @ 1m: 112.5dB
- IP Rating: IP65
- Freq. Response: 180Hz - 7kHz
- Flare Size: 400 x 200 x 450 mm
- Weight: 3.9kg
|
|
This high performance PA horn speaker boasts a massive SPL of 128.5 dB at 40 Watts providing high forceful and effective sound penetration making it well suited to very noisy public address installations. |
 |
A4928 |
|
- Connects to a variety of compatible Redback UTP transmitters
- Easy Cat5e/6 UTP data cabling connection.
- Up to 300m cable runs out to wallplate/box.
- Balanced Euro terminal block connections.
- Balanced mic or line level operation.
- 24V DC operation.
- Australian designed & assembled.
|
|
A single mic/line output box designed to operate with A 4931 and A 4932 zone connection boxes. |
 |
C1057 |
|
- Power Taps: 5, 10, 15, 20, 30W, 8Ω
- SPL 1W @ 1m: 90dB
- Freq. Response: 70Hz - 20kHz
- Sound dispersion: 135º conical
- Weight: 2.1kg
- Colour: White
- Material: ABS Plastic
- Cable Length: 5M
- Dimensions: Ø185mm x 230mm
- IP Rating: IP45
|
|
Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. |
 |
MB1140 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
Designed to allow 8 ohm speakers to be utilised in a 100V line public address speaker system. Ideal for converting existing systems to 100V line or where 8 ohm speakers have been specified for a PA installation. |
 |
C0375 |
|
- Impedance: 100Ω
- Sensitivity: -58dB ± 3dB
- Frequency response: 70Hz - 15kHz
- Cable Connection: Mini XLR
- Length: 330mm
- Polar pattern: Cardioid (unidirectional)
- Voltage: 11 - 52 Volts DC
|
|
An elegant, stylish, slimline unobtrusive desk-mount paging microphone equipped with a 3 pin balanced XLR lead. Features switchable flat or rolloff response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock |
 |
C8892D |
|
- Unidirectional condenser insert
- Exceptional performance
- Anti-roll band
- Textured body
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Wireless handheld 700 channel microphone ideal for use with the Redback 700 channel receiver unit (C 8890D). |
 |
C0938 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
- Available in 8 ohm or 100V line multi-tap versions.
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
 |
C0939 |
|
- Horizontal or vertical mounting
- Ball joint angle adjustment
- Dual 4” woofer drivers with 3/4” titanium dome tweeter
- Ideal for BGM & general sound reinforcement
- Stylish glossy finish & enclosure design for upmarket bars, boutiques and venues
- Available in 8 ohm or 100V line multi-tap versions.
|
|
These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments. |
 |
C2070 |
|
- Power rating: 30W RMS
- Power taps (100V): 15 & 30W
- SPL 1W @ 1m: 100dB
- SPL Max @ 1m: 115dB
- Frequency response: 130Hz - 18kHz
- Dimensions: ≈360W x 165H x 275D mm
- Colour: Grey
- Weight: ≈3.1kg
- Connection details:
- Black Common
- White 30W tap (330 ohms)
- Green 15W tap (670 ohms)
|
|
A high performance weatherproof music horn for use in installations requiring a high output speaker for BGM programming and paging playback. |
 |
A4911 |
|
- 2 inputs to 1 output
- Suitable for mic or line signals
- Input 1 vox mutes input 2
- Separate controls for volume and vox sensitivity
- Vox operated 24V dc output for control of external devices
- Compact design
- 24V dc operation via 2.1mm dc jack (power supply sold separately)
- Dimensions: 25H x 105W x 81D mm
|
|
This compact 2 input mixer which accepts either a line level signal or balanced microphone signal for each input. The output signal is suitable for feeding an amplifier with either a line level input or balanced microphone input. Input one will vox mute i |
 |
A4932 |
|
- Input Mic Level Sensitivity: 3mV
- Input Line Level Sensitivity: 1V
- Music Input Line Level Sensitivity: 200mV
- Output Connector: RJ45 8P8C
- Input Connectors (Audio): 3 pin XLR balanced, 2 x RCA, 3.5mm JACK
- Dimensions: ~133W x 65D x 44H
- Weight: ~0.2 kg
|
|
This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. |
 |
C2058 |
|
|
|
Ceiling Mount Version - See C 2054 for wall mount
Constructed from galvanised mesh this enclosure has been designed to protect the enclosed horn/speaker from physical damage or theft. The robust design makes it ideal for use in schoolyards, unde |
 |
S0088 |
|
- Events triggered by closing contact
- Event time and date recorded
- Power ON time and date recorded
- 24V DC switched output
- Adjustable output ON Time delay
- Adjustable output
- Event count
- Battery Backup (Time only)
- Micro SD card supplied
- CR2032 backup battery supplied
- 24V DC operation
- Supplied with 24V DC plugpack
|
|
Allows you to count the number of instances of a pair of closing contacts. Event times and dates are recorded to the internal Micro SD card for easy review. |
 |
A1980B |
|
- Bright fire engine red casing.
- 35W max internal amplifier.
- In-built electronic siren to gain attention when required.
- Lightweight, easy to use with trigger to talk button.
- Be heard over distances up to 100m.
- Ideal for addressing large crowds at any event.
- Requires C size batteries (8 of).
|
|
A traditional hand held megaphone or bullhorn for announcing. Suitable for sports rallies, school carnivals, conventions, demonstrations etc. Includes inbuilt electronic siren for gaining instant attention. Light weight and easy to use. Up to 100m in ideal conditions. |
 |
C8893B |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or rechargeable).
- Note: Beltpacks are not supplied with a mic. Lapel mic to suit is C 8907.
|
|
Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890B). |
 |
A4568 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Designed to interface the A4567 Line monitoring unit with a fire indicator board. The addition of the A4568 enables you to monitor the status of each individual zone. |
 |
A4931 |
|
- Input Mic Level Sensitivity: 3mV
- Input Line Level Sensitivity: 1V
- Music Input Level Sensitivity: 500mV
- Output Connector: RJ45 8P8C
- Input Connectors: Audio: 3 pin XLR balanced 2 x RCA, 3.5mm JACK
|
|
This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. |
 |
A5138 |
|
- Input Mic Level Sensitivity: 3mV
- Output Connector: RJ45 8P8C
- Input Connector: 5 pin XLR balanced
|
|
The A5138 UTP wall plate has a standard 5 Pin XLR connector for connection of microphones with PTT switches. |
 |
A4931V |
|
- Input Mic Level Sensitivity: 3mV
- Input Line Level Sensitivity: 1V
- Music Input Level Sensitivity: 500mV
- Output Connector: RJ45 8P8C
- Input Connectors: Audio: 3 pin XLR balanced 2 x RCA, 3.5mm JACK
|
|
This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub. |
 |
C0356 |
|
- Impedance: 250Ω
- Sensitivity: -65dB ±2dB
- Frequency Response: 30Hz-20KHz
- Pattern: Cardioid
- Cable Length: 6m
|
|
This cardioid microphone is designed to be mounted from ceilings in installations such as churches where greater noise isolation is required. Low profile design and flexible cable hanger provide for diverse mounting options and minimum visibility. Phant |
 |
C0351A |
|
- Insert: Electret
- Impedance: 250Ω balanced
- Sensitivity: -52dB ±3dB
- Frequency response: 30Hz - 18kHz
- Polar pattern: Cardioid/Fig 8/Omni/Variable
- Dimensions: 100L x 93W x 26Hmm
|
|
This boundary microphone is designed to be surface mounted and is fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel on/o |
 |
A4489A |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4489A zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. Suits for line level or 100V line zone switching. |
 |
A4469 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1974 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 50 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4469 zone relay unit may be installed remotely and has been designed to switch either low level inputs or amplifier outputs and interfaces the A4660 paging console with existing PA systems. |
 |
A6507 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
This compact module includes a seven step 100V line speaker attenuator/volume control which can be remotely adjusted via RS 485 serial control. |
 |
C0903 |
|
- 3.5" high efficiency woofer driver.
- Mylar dome tweeter.
- Contoured profile with adjustable wall bracket.
- Recessed gold plated banana connection to speaker cabling.
- IP54 rated sealed enclosure.
- Marine grade rust free aluminium mounting brackets.
- Rust free aluminium grille.
- Industrial strength powdercoated bracket.
|
|
These wall mount music speakers feature exceptional sound quality for both domestic and commercial applications, such as theatre surround or bookshelf speakers, and PA sound reinforcement. |
 |
C0902 |
|
- 3.5" high efficiency woofer driver.
- Mylar dome tweeter.
- Contoured profile with adjustable wall bracket.
- Recessed gold plated banana connection to speaker cabling.
- IP54 rated sealed enclosure.
- Marine grade rust free aluminium mounting brackets.
- Rust free aluminium grille.
- Industrial strength powdercoated bracket.
|
|
These high power Redback Bookshelf Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connect |
 |
C0946 |
|
- Impedance: 8Ω
- 100V Power taps: 5, 10, 20, 30W
- SPL 1W @ 1m: 88dB @ 1kHz ±2dB
- Freq response: 65Hz - 22kHz
- Weight: 1.8kg ea
- Dimensions (mm): 261H x 160W x 156D (172 including bracket)
|
|
Offers the flexibility for 8 ohm domestic use or 100V line for commercial installations.
These stylish wall speakers deliver high quality sound for music and sound reinforcement in both domestic and commercial installations. Ideal for entertaini |
 |
C0992 |
|
- Rugged moulded ABS construction
- Aluminium diecast framed neodymium woofer for light weight and low distortion.
- High performance large voicecoil diameter
- Wide frequency response
- Titanium diaphragm compression driver
|
|
Available in sizes from 8" to 15", these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind. |
 |
A4906 |
|
- Mic, line or 100V input level.
- Line level output.
- Phantom power to Mic Input (12V DC).
- Controls for master volume and VOX sensitivity.
- VOX operated relay outputs.
- 24VDC switched output. (120mA Max).
- 24VDC operation via 2.1mm DC power jack.
- Dimensions 133W x 30H x 80D mm.
|
|
The A 4906 is a versatile unit which accepts either a line level signal, balanced microphone signal or 100V input signal.
The output signal is a line level signal suitable for feeding into an amplifier. |
 |
C0327 |
|
- All metal casing and grille.
- PTT pair for muting auxiliary inputs.
- Heavy duty bare end cord.
- 450mm gooseneck with screw fit base.
- Ideal for supermarkets, fast food restaurants etc.
|
|
This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. |
 |
A4905 |
|
- XLR Mic input
- RCA Aux input
- XLR balanced output.
- Phantom power to Mic Input (15V DC).
- Controls for AUX, MIC and master volume.
- DIP Switch selectable AUX input sensitivity.
- 24VDC operation via 2.1mm DC power jack.
|
|
This line pre-amp will accept either a microphone or auxiliary input and convert it to a balanced high level signal suitable for distribution up to 500M without interference with up to 3V of output level available. Volume controls are provided for both inputs plus a master volume control. The microphone is a balanced XLR input whilst the auxiliary |
 |
Q2014 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
|
|
Compact and portable, this handheld battery powered 1KHz tone generator has been designed to test PA systems and in particular hearing loop induction sound systems. The unit produces a 1KHz tone which is fed into the input of the amplifier under test. Two output levels are provided, 100mV and 1V. Includes 9V battery. Size: 79W x 117H x 24Dmm. |
Redback