|
Description |
Downloads |
Specs |
Ordering |
|
 |
S0913 |
|
- Switch type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Mounting hole: 25mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
Z6338X |
|
- Input Range: 3.8V to 32V.
- Output Range: 1.25V to 35V.
- Input Current: 3A (max),
- No-Load Current: 18mA (5V input, 8V output*)
- *No-load current is less than 18mA. Higher the voltage, the greater the no load current.
|
|
A converter module allowing a low input voltage to be increased to a higher output voltage. Input 3.8-32V DC. Output 1.25-35V DC. Ideal for powering higher voltage devices from a typical 5V microcontroller platform. 3A continuous current. |
 |
Z6240A NEW
|
|
- Form factor compatible with earlier series of Arduino boards for compatibility with existing shields and projects.
- Expanded memory and faster clock speed
- Extra on-board peripherals including 12-bit DAC, CAN BUS and OP Amp.
- Wider input voltage range for integration with motors, LED strips and actuators.
- SWD connector for debugging.
- HID support for keystrokes and mouse movement.
|
|
Introducing the Funduino UNO R4 Minima compatible Arduino board. Equipped with the RA4M1 microprocessor, this board offers enhanced processing power, expanded memory, and more, all while maintaining the reliable UNO form factor and practical 5V operating voltage. Get ready for a remarkable upgrade! |
 |
J0085 NEW
|
|
- Sensor Type: Hall effect
- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V)
- Max current draw: 15mA @ 5V
- Output Type: 5V TTL
- Working Flow Rate: 1 to 30 Litres/Minute
- Working Temperature range: -25 to +80℃
- Working Humidity Range: 35%-80% RH
- Accuracy: ±10%
- Maximum water pressure: 2.0 MPa
- Output duty cycle: 50% +-10%
- Output rise time: 0.04us
- Output fall time: 0.18us
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min)
- Pulses per Litre: 450
- Durability: minimum 300,000 cycles
- Cable length: 150mm
- 1/2″ nominal pipe connections, 0.78″ outer diameter, 1/2″ of thread
- Size: 63.5 x 35.5 x 35.5mm
|
|
The YF-S201 Hall Effect Water Flow Meter Sensor comes with three wires: red (5-24VDC power), black (ground) and yellow (Hall effect pulse output). |
 |
Z6320X |
|
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
- Extra components not needed
- Long transmission distance
- Low power consumption
- 4 pins packaged and fully interchangeable
|
|
Voltage: 5V
Temperature: -40~80'C, +/0.5
Humidity: 20~90%RH +/-2%RH
Suitable for Arduino SCM
A product for Arduino that works with official Arduino boards.
|
 |
Z6381A |
|
- Adopts industrial chip esp8266, esp-12f module with metal shielding Case, strong Anti-slip potential;
- Used as an independent commission for the development of esp8266, uploading an official to the team Firmware, open source nodemcu, etc.
- Can also be used as an independent development board for Arduino, use the same as Arduino Development Board.
|
|
An Arduino compatible development board featuring WiFi making it ideal for plug-and-play projects.The board also features its GPIO broken out, a full USB-serial interface, NodeMCU pre-flashed and a power supply all on the one breadboard-friendly package. |
 |
Z6318 NEW
|
|
- GPS Breakout Module
- 2.7V-3.6V Supply
- Interfaces; UART, USB, SPI, DDC
- RT Crystal
- Antenna Supply and supervisor
- 3 Configuration Pairs
- 1 Timepulse pair
- External Interrupt/Wakeup
|
|
The NEO-6 module is a stand-alone GPS receiver featuring a high performance u-blox 6 positioning engine. |
 |
SA0910 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0915 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0911 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0914 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0912 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
SA0913 NEW
|
|
- Switch Type: SPST microswitch
- Connection: 6.3mm spade
- Illumination: 5-12V input
- Max material thickness: 30mm
- Mounting Hole: 27.5mm
- Mounting depth: 61mm
|
|
Ideal for use in retro gaming projects or anywhere a jumbo momentary switch may be required. |
 |
J0083 NEW
|
|
|
|
This 5mm tubing is made of silicone rubber which is flexible, resistant to high temperatures and does not deteriorate outdoors. |
 |
Z6379X |
|
|
|
Detects soil humidity levels - a handy little sensor for building automated watering and retic systems. 3.3-5V input. Note: typical lifespan of about a year when left in soil permanently. 58L x 20Wmm. |
 |
Z6495 NEW
|
|
- Non-contact detection, moving object detecting.
- This module's transmitting frequency is 24GHZ, can be widely applied in business, industries, word controlling etc.
- Provide various frequency range standards: -UK,-F.
- Advanced low consumption PHEMT oscillator.
- Independent transmitting and receiving route, can get the big gain.
- High sensibility, high flexibility, low cost, operating distance is 15m.
- Single channel operation
|
|
The CDM324 is a 24GHz Millimeter Wave Radar Sensor Module designed for reliable non-contact motion detectionand moving object detection. |
 |
Z6489 NEW
|
|
- Acts as a USB power bridge between a standard PD or QC3.0 USB power supply and your project.
- Select 5V, 9V, 12V, 15V or 20V using the on board button.
- LED display for chosen voltage.
- 5A maximum output current (up to 100W PD).
- Last voltage setting memory when power is disconnected.
|
|
The USB-C Fast Charge Trigger Board Module is a high-performance, versatile solution designed to provide fast and efficient charging for a wide range of devices. |
 |
Z6497 NEW
|
|
- Integrated temperature and humidity sensing for precise control
- Wide temperature range from -20℃ to 60℃
- Full humidity control with a range of 0% to 100%
- High control accuracy of 0.1℃
- Relay output with a maximum capacity of 10A
- Compact and durable design with dimensions of 65*55*28mm
|
|
The XH-M452 Dual Output Temperature & Humidity Control Board is a versatile device designed for precision climate control applications. |
 |
Z6492 NEW
|
|
- Model: CH32F103C8T6
- Core: ARM 32-bit Cortex-M3 CPU
- Operating Frequency: Up to 72 MHz
- Flash Memory: 64KB
- SRAM: 20KB
- Operating Voltage: 2.0V to 3.6V
- I/O Logic Voltage: 2.0V to 3.6V
- Reset Functionality: Supports Power-On Reset (POR) and Power-Down Reset (PDR)
- Crystal Oscillator: 4-16 MHz for precise clocking
- On-board Mini USB port for both power supply and USB communication
- Colour: Black
- Material: Metal
- Dimensions: 53 x 22mm
|
|
The CH32F103C8T6 ARM STM32 SWD Development Board is an ideal platform for learners and developers looking to explore and master the STM32 microcontroller based on the ARM Cortex-M3 32-bit core. |
 |
Z6491 NEW
|
|
- Wide Current Range: Supports motor loads ranging from 5A to 22A, ensuring flexibility for various DC motor applications.
- PWM Technology: Utilizes Pulse Width Modulation to efficiently regulate motor speed while minimizing energy loss and heat generation.
- MOSFET Control: Integrated high-efficiency MOSFETs for stable, reliable, and high-current output performance.
- Compact Design: Designed for easy integration into small projects and enclosures.
|
|
The PWM MOSFET Motor Speed Controller is a high-performance module designed to provide precise control of DC motor speed using Pulse Width Modulation (PWM) technology. |
 |
Z6490 NEW
|
|
|
|
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. |
 |
Z6493 NEW
|
|
- The PCA9685 offers 16 fully programmable PWM outputs with a 12-bit resolution, providing 4096 steps for precise duty cycle adjustments on each channel.
- The module uses the I2C bus for communication, ensuring easy integration with microcontrollers like Arduino or Raspberry Pi.
- Supports frequency control across all 16 channels, programmable between 24Hz and 1526Hz.
- The duty cycle (pulse width) can be fine-tuned from 0% to 100% for accurate output control.
- The on-board PWM controller manages all 16 channels independently, reducing processing load on the microcontroller compared to direct pin-based servo control.
- Multiple modules can be daisy-chained together. With up to 62 boards on a single I2C bus, you can control up to 992 servos using just two pins.
|
|
This 16 Channel PWM Servo Control Board is a versatile module that allows you to control up to 16 servos using only 2 pins via I2C communication. |
 |
Z6496 NEW
|
|
- Simple step and direction control interface
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated
|
|
This breakout board is for A4988 DMOS Microstepping Driver with translator and overcurrent protection. |
