|
Description |
Downloads |
Specs |
Ordering |
|
 |
Z6462 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
This control board features 4 x 3A 120V AC/24V DC rated relays for building in device control, and trigger other systems in your design.
|
 |
Z6463 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
This power breakout board allows you to break out all the micro:bit pins, plus provides power via 2 x AA batteries. The board also includes short power lead adaptor. |
 |
Z6464 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
This sensor connection shield allows you to breakout all digital and analog interfaces plus adds I2C serial port and SPI comms interfaces. |
 |
Z6465 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Transform your micro:bit into a handheld game pad or use it as a controller for othe projects. |
 |
Z6466 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Plug in your micro:bit and breakout every pin to a standard header. Allowing you to connect it to other components using jumper wire. |
 |
Z6468 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Transform the pins of the micro bit motherboard into female headers allowing you to easily connect leads and build circuits. With the addition of a power module the breakout board can directly provide power for the micro bit board and load the capability of the breakout board. |
 |
Z6391A |
|
- 3 magnetic field channels and 3 acceleration channels
- From ±1.3 to ±8.1 gauss magnetic field full scale
- ±2g/±4g/±8g/±16g linear acceleration full scale
- 16-bit data output
- I2C serial interface
- Analog supply voltage 2.16 V to 3.6 V
- Power-down mode / low-power mode
- 2 independent programmable interrupt generators for free-fall and motion detection
- Embedded temperature sensor
- Embedded FIFO
- 6D/4D-orientation detection
|
|
Add the power of orientation to your next project with this triple-axis accelerometer/magnetometer compass module. |
 |
K9810 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Sometimes you don't need ultra-precise PWM control. Based on a 555 Timer, it provides a quick PWM solution for all sorts of applications from power tools to motor speed control, to dimming lights. |
 |
K5157 |
|
- Low distortion and noise
- Easy to build
- Compact PCB
- Clipping Indicator LED
- Onboard DC Fuses
- Specified Power Output
- Power Indicator LED’s
- Overload Recovery
- Square Wave Response
- Survives Short Circuits
- Quiescent Current Adjustment
- Output Offset Voltage Adjustment
|
|
(SC Jan-May '17) This completely new amp design incorporates most of the features of Silicon Chip Ultra-LD Mk4 200W amp but uses easy-to-solder through-hole components - no SMD! |
 |
Z6381 |
|
- Adopts industrial chip esp8266, esp-12f module with metal shielding Case, strong Anti-slip potential;
- Used as an independent commission for the development of esp8266, uploading an official to the team Firmware, open source nodemcu, etc.
- Can also be used as an independent development board for Arduino, use the same as Arduino Development Board.
|
|
An Arduino compatible development board featuring WiFi making it ideal for plug-and-play projects.The board also features its GPIO broken out, a full USB-serial interface, NodeMCU pre-flashed and a power supply all on the one breadboard-friendly package. |
 |
K1148 |
|
|
|
This kit contains the parts to build your new smart friend. Tobbie is an intelligent six legged robot which provides great interaction with children. The little robot offers wonderful lights and sound effects.
|
 |
K1149 |
|
|
|
Build this kit into not one but 12 different projects. Includes detailed instructions to assemble all the included parts which can then be rearranged into a many different forms. |
 |
Z6435 |
|
- Microcontroller Atmel ATmega32U4
- Touch IC Resurgent Semiconductor MPR121
- MP3 decoder IC VLSI Solution VS1053b
- Audio output 15mW into 32Ω via 3.5mm stereo socket
- Removable storage up to 32GB via micro SD card
- Input voltage 3.0V DC – 5.5V DC
- Operating voltage 5V DC
- Max. output current (5V rail) 400mA (100mA at startup)
- Max. output current (3.3V rail) 300mA
- LiPo cell connector 2-way JST PH series - pin 1 +ve, pin 2 -ve
- LiPo charge current 200mA
- Capacitive touch electrodes 12 (of which 8 can be configured as digital I/O)
- Digital I/O Pins 20 (of which 3 are used for the MPR121 and 5 are used for the VS1053b — the latter can be unlinked via solder blobs)
- PWM channels 7 (shared with digital I/O pins)
- Analogue input channels 12 (shared with digital I/O pins)
- Flash memory 32 kB (ATmega32U4) of which 4kB used by boot loader
- SRAM 2.5kB (ATmega32U4)
- EEPROM 1kB (ATmega32U4)
- Clock speed 16MHz (ATmega32U4), 12.288MHz (VS1053b)
- DC current per I/O pin 40mA sink and source (ATmega32U4), 12mA source / 1.2mA sink (MPR121)
- Analogue input resistance 100MΩ typical (ATmega32U4)
|
|
The Touch Board is a microcontroller board with dedicated capacitive touch and MP3 decoder ICs. It has a headphone socket and micro SD card holder (for file storage), as well as having 12 capacitive touch electrodes. It is based around the ATmega32U4 and runs at 16MHz from 5V. It has a micro USB connector, a JST connector for an external lithium po |
 |
Z6430 |
|
- Touch IC: Resurgent Semiconductor MPR121
- Audio Output: 15mW into 32Ω via 3.5mm stereo socket
- Input Voltage: 3.3V (via 40-way Raspberry Pi GPIO connector)
- Input Current: 17mA idle, 36mA with all features in concurrent use.
- Capacitive Touch Electrodes: 12 (of which 8 can be configured as 3.3V digital I/O)
- Digital I/O Pins: 7, brought out from 40-way Raspberry Pi GPIO connector – pins 12, 13, 15, 16, 18, 22, 36
- Push Switch: Active low momentary push switch connected to pin 7 on the 40-way Raspberry Pi GPIO connector (requires the Pi's onboard pull up resistor to be enabled in software)
- Active low, red connected to J8.31 (5mA when on), green to J8.29 (1mA when on), blue to J8.37 (4mA when on)
- Prototyping Area: 84 pads (7 x 12) with 1mm diameter drills spaced 2.54mm apart.
- Dimensions: 85 x 40 x 7mm
|
|
The Pi Cap is an addon board for the Raspberry Pi A+, B+, 2 B, 3 B and Zero. It features a dedicated capacitive sensing IC, 3.5mm stereo audio output, push switch, RGB LED and prototyping area |
 |
Z6221 |
|
- ADC bit rate: 16 Bit
- Interface type: I2C
- Channel: 4 Channel AN0 AN1 AN2 AN3 or 2 different input
- Input voltage: 2.0-5.5V
- Channel input voltage: 0-VDD
- Continuous mode: Only 150μA
- Single-shot mode: Auto Shut-Down
- Programmable data rate: 8sps-860sps
- Module size: Approx. 17 x 28 x 0.1mm
- Pin size: Approx. 11 x 25mm
|
|
A popular high precision ADC for microcontroller designs with 860 samples/sec over I2C. 2-5V input. |
 |
Z6333 |
|
|
|
Add GPS location to your Arduino/Pi project, aircraft or drone. 3.3/5V input. Includes 6x20mm ceramic antenna. |
 |
Z6332 |
|
|
|
A GPS shield for Arduino featuring a 28dB high performance antenna and SD card slot. 3.3/5V input. |
 |
Z6525 |
|
- Supply Voltage: 3.3V to 5V
- Number of Pixels: 128 × 64
- Colour Depth: Blue
|
|
A compact monochrome 128x64 OLED display module with I2C/SPI communication. 3-5V input. 22x22x12mm. |
 |
K7515 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Designed by Altronics. A decade box is a really handy device for trying resistor values in-circuit before you select the final value to solder down. |
 |
K9805 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
Utilises photoplethysmography sensing to detect blood flow and heart beating. This project is ideal for interfacing with Arduino projects requiring biometric monitoring. Published in DIYODE Magazine November 2017. |
 |
H8950A ROHS
|
|
- Square form factor
- Compatible with Raspberry Pi B+, Pi-2, Pi-3
- Media server function with space for internal 2.5” HDD
- Multiple mount options including VESA
- Non-slip rubber feet
- LED guides for Power & Action on Pi B+ , Pi-2, Pi-3
- Internal space for addition of a HAT
- Internal space for hidden front facing Pi-Camera
- Removable panel for SD card access
- Secure/lockable Top Cover with 4 security screws
- Exceptional ventilation + space for onboard heat-sinks
- Top cover with easy clip system for PCB access if required
- Recessed pockets for access to all external connectors
|
|
A square case for your Raspberry Pi with internal 2.5&rdquo HDD bay and space for HATs & a camera. Ideal for desktop use, may also be VESA mounted. |
 |
K9675 |
|
- Easy to build from acrylic and M3 hardware.
- Supplied in kit form.
- Provides a neat desktop display for monitoring an Arduino project.
- Plenty of clearance for shield mounting on rear.
- Front panel can be drilled out to add in control buttons or switches.
|
|
A cut down MegaBox which provides a backlit 16x2 LCD for simple readouts, plus room to customise the front panel with buttons or IR sensor. UNO (sold separately) fits neatly behind the screen and provides room for add-on shields as required. |
 |
K9680 |
|
- This product is supplied in component form and requires soldering, drilling, and assembly. We recommend users are familiar with at least basic electronic principles and have the ability to solder.
|
|
(Designed by Altronics) These 210 x 110mm jumbo digits are made from PCB and can be daisychained together into an array of numbers for counter and clock projects. Each board is fitted with 74HC595 8 bit serial shift register chip and can be driven by Arduino ShiftOut. Aux output is provided for driving a decimal point/colon. Build yourself a sales |
 |
K9800 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
This 3 state logic probe design includes power connection leads and utilises the LM339N chip to provide logic states when checking circuits, output pins on boards etc. |
 |
K9700 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
(Designed by Altronics) This 4 digit common anode driver board is ideal for building an Arduino controlled clock or counter. It features two on board 74HC595 chips which can be easily driven using Arduino ShiftOut. It utilises all through hole components for easy construction. |
