|
Description |
Downloads |
Specs |
Ordering |
|
|
Z6584A NEW
|
|
- Measures acceleration and tilt
- Detect tapping, double-taps, and shaking
- Great guide to get you started
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
- 2.54mm breakout for breadboarding/prototyping
|
|
The on-board LIS3DH can measure 16-bit acceleration data in ranges from 2g to 16g in all 3 axes. |
|
Z6585 |
|
- Accurate air pressure measurements
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
- 2.54mm breakout for breadboarding/prototyping
|
|
Our PiicoDev® Pressure Sensor is perfect for measuring barometric pressure or inferring altitude from air pressure. |
|
Z6586 NEW
|
|
- Control up to four servos independently
- Daisy chain up to four Servo Drivers together for more complex projects
- No soldering necessary
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
- 2.54mm breakout for breadboarding/prototyping
|
|
With this new servo driver users will be able to add the power of motion to projects. |
|
Z6587 NEW
|
|
- Easy, wireless communication up to 100m
- Create your own network of connected devices.
- Compact, on-board antenna
- 915MHz is suitable for amateur use in Australia.
- No soldering necessary
- 2x LEDs: Rx/Tx indicator, and user-controllable
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
- 2.54mm breakout for breadboarding/prototyping
|
|
With this Transceiver users can unlock some very cool capabilities like collecting data from some distant sensor, or remote-controlling hardware. |
|
Z6588 NEW
|
|
- A great guide to get you started with Raspberry Pi, Pico, or Micro:bit
- Backup power provided by a Supercapacitor - no batteries required!
- Tracks year, month, day, weekday, hour, minutes, seconds
- Schedule events or alarms
- Automatically switches between main power and backup power
- High accuracy clock - within 30 seconds per year
- PiicoDev Connector, compatible with Qwiic and STEMMA QT (3.3V Only)
|
COMING SOONThis item is arriving soon. |
The PiicoDev Precision Temperature Sensor features a low-power, high precision TMP117 with 16-bit resolution and an accuracy of ±0.1°C (across -20°C to +50°C) with no calibration required. |
|
Z6589 NEW
|
|
- Intuitive output: Air Quality Index
- Measures VOCs and eCO2
- A great guide to get you started
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
- 2.54mm breakout for breadboarding/prototyping
- Manufactured and supported in Australia by Core Electronics
|
|
PiicoDev ENS160 Air Quality Sensor. Measure indoor air-quality - sensitive to fumes, cooking smells, humans. |
|
Z6590 |
|
- Connect new sensors to your Micro:bit
- No soldering necessary
- Crocodile clip connections are broken out again, so you can still hand wire to your Micro:bit
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
|
|
Connect your Micro:bit with the outside world using PiicoDev® Adapter for Micro:bit. With this adapter you can experiment with sensors from the PiicoDev range giving your Micro:bit new sensing abilities. |
|
Z6591 |
|
- Rapid prototyping with solderless connections
- Other useful pins are broken out
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
|
|
The PiicoDev® Adapter for Raspberry Pi is a great way to connect sensors to your Raspberry Pi. |
|
Z6596 |
|
- 100mm long
- Also compatible with Qwiic and STEMMA QT boards
- Reversible cable - if it fits it works!
|
|
This 100mm cable is for connecting PiicoDev modules together. |
|
Z6597 |
|
- 200mm long
- Also compatible with Qwiic and STEMMA QT boards
- Reversible cable - if it fits it works!
|
|
This 200mm cable is for connecting PiicoDev modules together. |
|
Z9950 |
|
|
|
Handy stickers for your Atmega328p chips. Great for reminding you of the appropriate pinouts for your DIY Arduino prototype. Printed on quality Arlon UV vinyl.
|
|
ZA6421 NEW
|
|
- Ultra compact form factor
- Dual core ARM Cortex M0+ processor
- Two SPI controllers
- Two I2C controllers
- 16 PWM channels
- 26 multifunction GPIO pins
- Three analogue inputs
- On board USB controller
- In-built temperature sensor
- Castellated module allows soldering direct to carrier boards
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- Accurate on-chip clock
- Accelerated integer and floating-point libraries on-chip
|
|
Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2350, a brand new microcontroller chip designed by Raspberry Pi in the UK. From controlling appliances to operating a light display, Raspberry Pi Pico puts the technology that underpins countless everyday operations into your hands. |
|
ZR6302G |
|
- On board on/off power button
- Integrated fan control forthermal management
- Dual-display support
- Two micro-HDMI ports
- Supports display resolutions up to 4K @ 60hz (1 x 2K up to 1440P@60, 1 x 4K 2.0 up to 4k@60)
- Multiple connectivity capabilities so less add on hardware required, including Bluetooth 5.0 with BLE, Gigabit Ethernet & Wireless LAN
- A 40P GPIO expansion header provides extensive compatibility with a wide range of accessories
- Get more multiple memory options, including 4GB RAM and a speed eMMC socket
- Compatible with most R-Pi 4 accessories, including cases, cameras and HAT modules
|
|
The OKdo ROCK 4C+ is a reliable, multifunctional and high-performing single-board computer based on a robust Rockchip RK3399T SoC, Dual Cortex® A72 CPU and Arm Mali™ T860MP4 GPU. |
|
ZR6474 |
|
- Cable Type: MIPI CSI Adapter Cable
- Cable Length: 0.1m
- Colour: Orange
|
|
Connect your ROCK board to a camera module with this MIPI CSI Camera Adapter Cable. |
|
ZR6479 |
|
- Cable Type: MIPI DSI Adapter Cable
- Cable Length: 0.1m
- Colour: Orange
|
|
Connect a MIPI display to a ROCK single board computer with this MIPI DSI Display Adapter Cable. |
|
ZW6240A NEW
|
|
- Form factor compatible with earlier series of Arduino boards for compatibility with existing shields and projects.
- Expanded memory and faster clock speed
- Extra on-board peripherals including 12-bit DAC, CAN BUS and OP Amp.
- Wider input voltage range for integration with motors, LED strips and actuators.
- HID support for keystrokes and mouse movement.
- Wi-FI and Bluetooth connectivity on board.
- Qwiic connector for I2C compatible sensors and actuators.
- LED matrix on board.
- Supports battery powered RTC.
|
|
The Funduino UNO R4 with WiFi is an Arduino compatible board integrating the powerful RA4M1 microcontroller with the robust wireless capabilities of the ESP32-S3 from Espressif. Additionally, it features an on-board 12x8 LED matrix, a Qwiic connector, a VRTC, and an OFF pin, making it an ideal choice for all your maker projects. |