| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
4 Channel 5V Relay Control Board Module/Sh...Z6327 |
| This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments equipment with large current. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current Equiped | ||
 |
8 Channel 5V Relay Control Board Module/Sh...Z6328 |
| This is a 5V 8-Channel Relay interface board, Be able to control various appliances, and other equipments equipment with large current. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current. | ||
 |
Funduino ULN2003 Motor Drive Module For Ar...Z6329 |
| On-board ULN2003A chipset 5-12V power supply On-board 4-way indicator light On-board XH-5P socket Compatible with Arduino | ||
 |
Funduino 5V DC Stepper Motor And ULN2003 C...Z6330 |
|
| Diameter: 28mm Voltage: 5V Step angle: 5.625 x 1 / 64 Reduction ratio: 1 / 64 5 Line 4 phase can be driven by ULN2003 chip. Dimensions of Board : 31 × 35mm ULN2003 Darlington using high-power stepper motor driver chip A, B, C, D four-phase LED indicates the status of the stepper motor work | |
 |
U-Blox Neo-6M GPS Module With SD Slot & An...Z6332 |
| A GPS shield for Arduino featuring a 28dB high performance antenna and SD card slot. 3.3/5V input. | ||
 |
U-Blox Neo-6M GPS Breakout Module With Ant...Z6333 |
| Add GPS location to your Arduino/Pi project, aircraft or drone. 3.3/5V input. Includes 6x20mm ceramic antenna. | ||
 |
GPS Breakout Module With AntennaZ6333X |
|
| Add GPS location to your Arduino/Pi project, aircraft or drone. 3.3/5V input. Includes 6x20mm ceramic antenna. | |
 |
DC-DC Buck Module 3-40V In / 1.5-35V OutZ6334 |
| Compact, self-contained LM2596 DC-DC module for generating a lower, regulated DC voltage output from a higher voltage supply. Much higher efficiency and lower heat dissipation than traditional linear regulator designs. 3-40V DC input. 1.5-35V output. 3A max. | ||
 |
Funduino MP3 Module With MicrophoneZ6335 |
| Supports audio decoding formats: MP3, MP3 + V, WMA, WAV, MIDI, SP-MIDI Separate analog, digital and IO power supply; serial data and control interface (SPI) Headphones and audio output interface, with internal PLL clock frequency multiplier; quality stereo digital to analog converter (DAC); 16 bits Scalable on-chip analog to digital converter (AD | ||
 |
MP3 Audio Shield With Micro SD CardZ6335A |
|
| Offers a complete and cost-effective audio solution. MP3 decoder with control interface, 3.5mm input (mic) and output jack sockets, and an onboard microphone. On board micro SD card socket offers easy media playback. Decodes OGG Vorbis/MP3/AAC/ WMA/MIDI. Records in OGG format. 5V input. | |
 |
Microphone D+A Module For ArduinoZ6336A |
| This module is perfectly suited to implementing sound control to your project. This sound detection module can detect noise and produce an analog output signal that can be used to trigger a switch like response. This allows you to replace mechanical switches that have been holding back your project with something a little less noisy or to start a l | ||
 |
DC-DC Buck Boost Module 1A / 1.25V-26V DCZ6337 |
|
| Utilises the LM2596S and LM2577 to accept a 3.5-28V input and output 1.25-26V (adjustable) at a max current of 1A. Includes brass standoffs. Ideal for small projects where regulated power is required. Size:L x 38W x 21Hmm. | |
 |
DC-DC Converter Module 3.5-35V In / 5-52V OutZ6338 |
|
| A converter module allowing a low input voltage to be increased to a higher output voltage. Input 3.5-35V DC. Output 5-52V DC. Ideal for powering higher voltage devices from a typical 5V microcontroller platform. 3A continuous current. Size:L x 38W x 14Hmm. | |
 |
DC-DC Converter Module 3.8-32V In / 1.25-3...Z6338X |
|
| A converter module allowing a low input voltage to be increased to a higher output voltage. Input 3.8-32V DC. Output 1.25-35V DC. Ideal for powering higher voltage devices from a typical 5V microcontroller platform. 3A continuous current. | |
 |
DC-DC Boost Display Module 3-34V In / 4-35...Z6339 |
| A boost module allowing a low input voltage to be increased to a higher output voltage. Display can be toggled between input and output voltages. Input 3-34V DC. Output 4-35V DC. 2A continuous current. Size: 66L x 34W x 14Hmm. | ||
 |
Funduino Joystick Game ShieldZ6340 |
| A joystick and button controller which plugs directly onto an Arduino UNO. Features a header for direct connection to Z 6348 Nokia screen. 3V3 or 5V DC input. Size: 88L x 54W x 40Hmm. | ||
 |
3x4 Numeric Membrane Keypad ModuleZ6341 |
| Ideal for access control projects, this adhesive backed membrane keypad can be interface to an Arduino's digital inputs. 69W x 77H with 85mm flexible flat connection lead. | ||
 |
Funduino USB Host ShieldZ6342 |
| Allows you to connect USB peripherals and mass storage devices to your Arduino. Uses the MAX3421E chipset. Fitted with stackable connectors. | ||
 |
Funduino L298 H-Bridge Motor Shield For Ar...Z6343 |
|
| Uses an L298 H-Bridge designed to drive inductive loads, such as relays, solenoids, DC and stepping motors. It can also drive two independent DC motors, controlling the speed and direction of each. Standard Arduino shield dimensions with analog and digital output headers. 5V input. | |
 |
Raspberry Pi GPIO Breakout Expansion KitZ6344 |
| Breaks out the 40 pin GPIO bus of your Raspberry Pi and connects it to a 500 pin breadboard. Making it perfect for experimenters to start prototyping and interfacing directly with the Raspberry Pi. | ||
 |
Funduino LCD Screen Keypad Control ShieldZ6345 |
| A 16x2 black character screen with green backlight. Push buttons are provided for up, down, left, right and select. Ideal for scrolling and selecting menu options. Works with the LiquidCrystal library in Arduino IDE allowing control with only 6 digital I/O lines. Standard Arduino shield dimensions and pinouts. | ||
 |
Funduino Lilypad Style ATmega32U4 Developm...Z6346 |
| The "lilypad" form factor allows easy building of sewable electronics and e-textile projects. Can be used with Z 6368 LED sequins. The ATMega 32U4 is an 8-bit AVR microcontroller featuring 32KB self-programming flash program memory and a 12-channel 10-bit A/D-converter. | ||
 |
Funduino Lilypad Style ATmega328 Developme...Z6349 |
| The "lilypad" form factor allows easy building of sewable electronics and e-textile projects. Can be used with Z 6368 LED sequins. It has 14 digital input/output pins (of which 6 can be used as PWM outputs) and 6 analog inputs. 50mmØ. | ||
 |
Funduino Wifi Ethernet CC3000 ShieldZ6350 |
| The CC3000 chipset provides a self contained wireless network which makes incorporating wi-fi into your project easy. Utilizes an SPI interface allowing control of the flow. Onboard antenna with pads for connection to external antenna. A microSD card slot is provided which will work with Arduino's SD library. Standard Arduino shield layout. 4.5-12V | ||
 |
SD/MMC Card Mass Storage Breakout BoardZ6353 |
| A simple SD card interface for adding mass storage to your project for access to files or datalogging. Pinout is Arduino compatible, but can be used with most other microcontrollers. 3.3/5V input. 30W x 50Lmm. | ||
 |
NRF905 ISM 433-915MHz RF Transceiver ModuleZ6354 |
| A 433-915MHz ISM band transceiver designed for use over distances up to 1000m. It is ideal for low power wireless communications between devices. 3.3V input. Note: when using, ensure you select a legal frequency for use in Australia. See ACMA website for more info. | ||
 |
3.3/5V DC Breadboard Power SupplyZ6355 |
| A compact module that makes the most of your precious breadboard space. Supplies both power busses with either 3.3V or 5V DC (switch selectable). USB 5V input or 6-12V input via 2.1mm DC jack. Suits P 1002, P 1009A, P 1012A and P 1015A. | ||
 |
MFRC522 Contactless RFID Breakout ModuleZ6356 |
| Uses the common MFRC522 chip to provide contactless 13.56MHz switching via electromagnetic field. Easy to set up with Arduino using readily available libraries. Includes keyfob and credit card style tags. 3.3V input. 40Lx60Wmm. | ||
 |
Infra-Red Transmission Breakout BoardZ6358 |
| Ideal for transmitting IR signals to control your existing home devices via Arduino. Wide transmission angle. Frequency: 37.9KHz. 3-5V input. 30L x 25Wmm. | ||
 |
ESP8266 ESP-01 Mini Wi-Fi Breakout ModuleZ6360 |
|
| ESP8266 ESP-01 802.11b/g/n serial to WiFi Module can give any microcontroller access to your WiFi network. A cost effective and easy to use WiFi add on for your project. Integrated TCP/IP protocol stack. 3.3V input. | |
 |
nRF24L01+ Wireless 2.4GHz Transceiver ModuleZ6361 |
| The nRF24L01+ is a wireless transceiver chip offering 100m range at 250kbps. Ideal for building short range data transmission into projects. 250kbps to 2Mbit data rate. 3.3-5V input. | ||
 |
8x8 Red LED Matrix Breakout BoardZ6362 |
| A compact module for displaying custom characters or creating scrolling effects or games. MAX7219 chipset. 5V input. 62L x 32W x 14Hmm. | ||
 |
Joystick Module With Select ButtonZ6363 |
| Similar to the analog joysticks found in game control pads with a "select" button when pushed down. Ideal for control of robotics projects. 2.5V output from X and Y in resting position. 5V input. 27W x 34Lmm. | ||
 |
TTL to RS485 Breakout ModuleZ6364 |
| A TTL to RS485 breakout module for connecting an Arduino or similar microcontroller to RS485 equipped devices. 5V input. 44L x 14Wmm. | ||
 |
Bluetooth 4.0 ModuleZ6365 |
|
| This small size Bluetooth 4.0 TTL transceiver module allows your project to communicate with other bluetooth equipped devices. Can be set as slave or master. Low standby current. 60m range. Inbuilt antenna. 3.6-6V input. 45L x 17Wmm. | |
 |
USB 5V DC Boost ModuleZ6366 |
| Accepts an input voltage of 1-5VDC and outputs 5V DC 600mA via USB. Ideal for powering projects from batteries such as a single 3.6V lithium cell. Very small module, easy to build into any design. 34L x 16Wmm. | ||
 |
44E Hall Effect Magnetic Sensor Breakout M...Z6367 |
| Utilises the 44E hall effect sensor for contactless magnetic switching. Output drops to ground when triggered. 4.5-24V input. 26L x 15Wmm. | ||
 |
44E Hall Effect Magnetic Sensor Breakout M...Z6367A NEW |
| Utilises the 44E hall effect sensor for contactless magnetic switching. Output drops to ground when triggered. 3.3-5V input. 36 x 22 x 7mm | ||
 |
White SMD LED Sequins 5pkZ6368 |
| White SMD LED sequins in packs of 5pcs. Ideal for creating e-textile projects with Arduino Lilypad. 5V DC 40mA input. Size: 12.7W x 5.2H x 2.2Dmm. | ||
 |
RS232 Serial to TTL Bi-Directional Convert...Z6369 |
| A bi-directional converter to shift between serial and TTL communication. Includes USB cable for power and breakout jumper lead for TTL connection. 3-5V input. Maximum baud: 150kbps. | ||
 |
1mW Red Laser Diode Breakout ModuleZ6370 |
| A 1mW red laser diode with header connection for easy interface to your project. 5V DC input. 650nm wavelength (red). Board size 43 x 23mm. | ||
 |
Red Laser Diode Breakout ModuleZ6370A |
|
| The transmitter module of the KEYES laser transmitter is designed for Arduino. Its connection port is compatible with the Arduino Shield transmitter. | |
 |
L3G4200D 3 Axis Gyroscope Breakout For Ard...Z6371 |
|
| 3-axis gyroscope, providing very high resolution (16 bit) measurements at up to 2000 dps. Measures how much your device is rotating around three axes within a selectable range. Ideal for gaming, and robotics applications. Includes headers. 3-5V input. | |
 |
Funduino Nano 3.0 Compatible Development B...Z6372 |
| An Arduino compatible nano board featuring the ATmega328p chip. A compact, breadboard friendly version of the Arduino UNO. USB mini B connection for power and serial. 5V DC input. Small size makes it perfect for embedding into your projects. Size: 46L x 18W x 18Hmm. | ||
 |
Touch Sensor Breakout for ArduinoZ6373 |
| A capacitive touch sensor for projects requiring touch interaction. 2-5.5V DC input. 30L x 16Wmm. | ||
 |
Infra-Red Receiver Breakout BoardZ6374 |
| Build IR control into your project. 90° receiving angle. 18m max distance. Frequency: 37.9KHz. 3-5V input. 20L x 15Wmm. | ||
 |
3 Watt White Star LED Breakout BoardZ6376 |
| A high power 3W white star LED with 200 lumen light output. 5V input. 30L x 23Wmm. | ||
 |
Active Buzzer Breakout for ArduinoZ6377 |
| A mini breakout board for generating sound from your Arduino. 5V input. | ||
 |
Rain Sensor Breakout for ArduinoZ6378 |
| This rain sensor board detects moisture and can be used for triggering a relay buzzer or fan. TTL level output. Output drops low when rain is detected. 100mA output. Adjustable sensitivity. Rain sensor board 50L x 35Wmm. 5V input. | ||
 |
Soil Moisture Breakout for ArduinoZ6379 |
| Detects soil humidity levels - a handy little sensor for building automated watering and retic systems. 3.3-5V input. Note: typical lifespan of about a year when left in soil permanently. 58L x 20Wmm. |
