|
Description |
Downloads |
Specs |
Ordering |
|
![K5117 Power Supply Kit To Suit K5116 Amplifier](https://images.altronics.com.au/thb/k/K5117.jpg) |
K5117 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
This is the recommended power supply for the K5116 Amplifier Module Kit. |
![Z6407 TPA3110 2 x 15W Digital Stereo Audio Amplifier Board](https://images.altronics.com.au/thb/z/Z6407.jpg) |
Z6407 |
|
- Electrical Specifications
- Supply Voltage: 8-26V DC
- Recommended Power Supply Current: 2A
- Output Power: 2x15W (@16V, 8RΩ)
- Size: 44mm x 40.5mm
- Audio Output
- Terminal: Speaker/s
- Impedance: 4 Ohms, 8 Ohms
- Recommended Power: 10W-20W
|
|
The TPA3110 chip on board this amplifier module provides a high output, lower power consumption audio solution with great audio quality too. |
![Z6441 ESP8266EX USB Mini Wi-Fi Module](https://images.altronics.com.au/thb/z/Z6441.jpg) |
Z6441 |
|
- 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
- 1 analog input(3.2V max input)
- a Micro USB connection
- Compatible with MicroPython, Arduino, nodemcu
|
|
This USB WiFi module is a complete and self-contained WiFi network solution that can operate independently or as a slave on other host MCUs. It can be booted directly from an external flash when it is powered by an application and is the only application processor in the device. The built-in cache helps improve system performance and reduce memory |
![Z6426 CAN-BUS Shield for Arduino](https://images.altronics.com.au/thb/z/Z6426.jpg) |
Z6426 |
|
- Supports standard frame, extended frame of transmission and reception; support two receiving methods: Polling and interrupt
- Provide various interfaces, such as U-Art, I2C, DB9 connector, etc.
- Support SD card data storage
- Support power supply via Arduino motherboard or DB9 connector (Pin 9 = VIN (voltage in), Pin 6 = GND)
|
|
The onboard BUS control chip can realize the data control on the CAN bus and data communication between devices. |
![Z6461 170 Tie Breadboard Shield for BBC Microbit](https://images.altronics.com.au/thb/z/Z6461.jpg) |
Z6461 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Features an adhesive breadboard, plus matching solder masked PCB holes underneath for when you want to solder down your design. All micro:bit pins broken out to headers. |
![Z6587 PiicoDev 915MHz Transceiver](https://images.altronics.com.au/thb/z/Z6587.jpg) |
Z6587 NEW
|
|
- Easy, wireless communication up to 100m
- Create your own network of connected devices.
- Compact, on-board antenna
- 915MHz is suitable for amateur use in Australia.
- No soldering necessary
- 2x LEDs: Rx/Tx indicator, and user-controllable
- PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
- 2.54mm breakout for breadboarding/prototyping
|
|
With this Transceiver users can unlock some very cool capabilities like collecting data from some distant sensor, or remote-controlling hardware. |
![K9815 ATDEV For ATtiny](https://images.altronics.com.au/thb/k/K9815.jpg) |
K9815 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
A powerful and versatile programming and breakout shield for ATtiny. Combine the shield with your favourite UNO and you've instantly got a programmer and debugging system in one! |
![K1955 433MHz Remote Control Trigger Kit - Transmitter](https://images.altronics.com.au/thb/k/K1955.jpg) |
K1955 |
|
- Range over 200m
- Receiver has momentary or toggle output
- Adjustable momentary period
- Receiver can drive a 12V relay
- Transmitter draws no standby current from 9V battery
- Transmit and receive indication
- Up to five receivers can be used in the same vicinity
|
|
(SC January '09) This easy to build transmitter and receiver unit can remote activate just about anything you want over a range of 200m! Up to 5 receivers may be used in one area and each can drive a 12V rel |
![Z6222A Funduino Pro Mini 328 5V/16MHz](https://images.altronics.com.au/thb/z/Z6222A.jpg) |
Z6222A |
|
- Includes connection headers
- Voltage regulated
- Max 150mA output
- Over current protected
- Reverse polarity protected
- Analog Pins: 8
- Digital I/Os: 14
|
|
Measuring a tiny (0.8mm) thick the Arduino Pro Mini comes unpopulated enabling you to solder in any connector or wire with any orientation you need. Ideal for experienced Arduino users or building into a compact embedded design. This board connects directly to the FTDI basic breakout board and supports auto-reset. |
![Z6463 Power Breakout Board For BBC Microbit](https://images.altronics.com.au/thb/z/Z6463.jpg) |
Z6463 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
This power breakout board allows you to break out all the micro:bit pins, plus provides power via 2 x AA batteries. The board also includes short power lead adaptor. |
![K8135 Super Stereo Ear Kit](https://images.altronics.com.au/thb/k/K8135.jpg) |
K8135 |
|
|
|
This stereo amplifier boosts ambient sound in the surround area by 50x! It has a headphone jack, volume control and power switch. |
![D0313A 16GB Micro SD Card with NOOBS for Raspberry Pi 4](https://images.altronics.com.au/thb/d/D0313.jpg) |
D0313A |
|
|
|
NOOBs is the fastest way to get the various operating systems for your Raspberry Pi 4. This 16GB Micro SD card can boot multiple operating systems, allowing quick and easy set-up of your Raspberry Pi 4. |
![Z6316 2 Channel 12V App Controlled Bluetooth Relay Board](https://images.altronics.com.au/thb/z/Z6316.jpg) |
Z6316 |
|
- Easy to set up and pair - Android or iOS eWeLink app available for direct control.
- Onboard Bluetooth status indicator and relay indicator.
- With 2 optocoupler isolation, strong anti-interference ability.
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module.
- Compact board design.
- Module with diode effusion protection short response time
|
COMING SOONThis item is arriving soon. |
A combined relay and control board with the ability to switch on and off connected loads using an App on your phone via Bluetooth. The eWeLink app offers seamless power switching using your device when in range of the relay board (typically 10m). |
![K6008 12V Motor Speed / Light Dimmer Controller Kit](https://images.altronics.com.au/thb/k/K6008.jpg) |
K6008 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
(SC November '08) This small circuit can be used as a speed controller for a 12V motor rated up to 5A (continuous) or as a dimmer for a 12V halogen or standard incandescent lamp up to 50W. It varies the power to the load (motor or lamp) usi |
![K6340 Mini Switching Regulator](https://images.altronics.com.au/thb/k/K6340.jpg) |
K6340 |
|
- Altronics kits are premium do-it-yourself projects designed to be assembled with ease. However, basic electronics knowledge and soldering skills are essential to construct our kits. A difficulty rating is provided to help determine if your ability is sufficient to build the kit project. Please note, once assembly has been commenced we are unable to honor any warranty claims. Please see the full details here.
|
|
(SC Feb '12) This tiny regulator board outputs 1.2-20V from a higher voltage DC supply at currents up to 1.5A. It's small, efficient and cheap to build, with many handy features such as a very low drop-ou |
![Z6344 Raspberry Pi GPIO Breakout Expansion Kit](https://images.altronics.com.au/thb/z/Z6344.jpg) |
Z6344 |
|
|
|
Breaks out the 40 pin GPIO bus of your Raspberry Pi and connects it to a 500 pin breadboard. Making it perfect for experimenters to start prototyping and interfacing directly with the Raspberry Pi. |
![Z6522A FT232 USB To TTL Serial Lead](https://images.altronics.com.au/thb/z/Z6522A.jpg) |
Z6522A |
|
|
|
Features a FT232 conversion chip, which has high precision, outstanding stabilization, and anti-interference. It can provide 5V power output with a self-resetting fuse to protect your device.
|
![Z6343 Funduino L298 H-Bridge Motor Shield For Arduino](https://images.altronics.com.au/thb/z/Z6343.jpg) |
Z6343 |
|
- Pin 1, sense a
- Pin 2, output 1, motor 1 -ve
- Pin 3, output 2, motor 1 +ve
- Pin 4, supply vs
- Pin 5, input 1, d8
- Pin 6, enable a, d9 (pwm)
- Pin 7, input 2, d11
- Pin 8, ground,
- Pin 9, logic vss
- Pin 10, input 3, d12
- Pin 11, enable b, d10 (pwm)
- Pin 12, input 4, d13
- Pin 13, output motor 2 -ve
- Pin 14, output motor 2 +ve
- Pin 15, sense b
|
|
Uses an L298 H-Bridge designed to drive inductive loads, such as relays, solenoids, DC and stepping motors. It can also drive two independent DC motors, controlling the speed and direction of each. Standard Arduino shield dimensions with analog and digital output headers. 5V input. |
![Z6529 2.2](https://images.altronics.com.au/thb/z/Z6529.jpg) |
Z6529 |
|
- Compatible with 3.3/5V operation voltage level
- On Board level conversion chip for 5/3.3v MCU
- With SD card socket
- With Backlight control circuit
- SPI serial bus only need 4 IO at least
- Size: 2.2 inch
- Control IC: ILI9225
- Display resolution: 176*220
|
|
A compact 2.2 inch serial controlled TFT LCD screen for Arduino and related open source projects. Provides a crisp clear 240 x 320 resolution display with 262K colour depth. Great for electronic projects requiring a small, easy to read graphical display screen. |
![W2430 Solid Core 0.5mm 6 Colour Hobby Wire Pack](https://images.altronics.com.au/thb/w/W2430.jpg) |
W2430 |
|
- Size: 1/0.6mm
- Voltage Rating: 300V
- Conductor Gauge: 23AWG
- Outside Diameter: 1.4mm PVC
- Temperature Rating: 90°C
- Colour: Red, White, Black, Blue, Green, Yellow
|
|
Multi pack of 10m hook up cable for projects. Suitable for general purpose low current wiring. Solid core wire is suits breadboard jumpers & links. |
![Z6465 Joystick Control Pad Shield for BBC Microbit](https://images.altronics.com.au/thb/z/Z6465.jpg) |
Z6465 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Transform your micro:bit into a handheld game pad or use it as a controller for othe projects. |
![K1109B Kelvin Crazy Cricket Kit](https://images.altronics.com.au/thb/k/K1109B.jpg) |
K1109B |
|
|
|
Kelvin, the electronic cricket, is a bit of a smart alec. Just like a real cricket, he only starts chirping in the dark. And also like a real cricket, the warmer it is, the more rapidly he chirps. So you can actually tell the temperature, based on the sounds he makes! |
![Z6469 Micro: bit Motor Drive Breakout Board](https://images.altronics.com.au/thb/z/Z6469.jpg) |
Z6469 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Make it easy for your micro bit to drive it''s DC motor with this breakout board. Alongside its TB6612FNG chip thats integrated into the board it also features 4 motor controls. The board also features a serial communication port to facilitate the connection of bluetooth module. |
![Z6468 310 Tie Breadboard Shield for BBC Microbit](https://images.altronics.com.au/thb/z/Z6468.jpg) |
Z6468 |
|
- The BBC micro:bit is a pocket-sized computer that you can code, customise and control to bring your digital ideas, games and apps to life. Each element is completely programmable via easy-to-use software on a dedicated website (www.microbit.org) that can be accessed from a PC, tablet, or mobile.
- It’s super easy to use, and ready to get started out-of-the-box, with a choice of coding editors for all abilities available in multiple languages. The extensive wireless and sensor features mean the micro:bit can be used across the school, including subjects such as science, design, maths, music, art and computing.
|
|
Transform the pins of the micro bit motherboard into female headers allowing you to easily connect leads and build circuits. With the addition of a power module the breakout board can directly provide power for the micro bit board and load the capability of the breakout board. |
![K2216 Crystal Radio Kit](https://images.altronics.com.au/thb/k/K2216.jpg) |
K2216 |
|
- Altronics are one of Australia's leading suppliers of educational electronics kits to schools, science workshops and institutions. Our kit range aims to introduce kids with curious minds to the concepts of electronics, solar power, robotics and DIY construction.
- If your organisation requires kits for your science curriculum, simply apply for an instant 30 day institutional account. This account offers bulk buying rates to ensure your organisation gets the most science for their budget!
|
|
Build and learn with your own working crystal radio set. See how the crystal diode converts RF to audio and explore the world of AM radio. Tunes into your favourite AM radio stations. |