| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
1U / 1RU Black Steel Reinforcement 19" Rac...H5160 |
| Vented panel, specifically designed to add rigidity to our rack frames. Pre-drilled with extra mounting holes to install into the top and bottom of the rack frames. Tough powdercoated finish. | ||
 |
Beltpack Charging Pod To Suit C7195A/BC7196A |
| Beltpack charging pod to suit C7195A or C7195B. | ||
 |
Wireless UHF Beltpack Mic 700 ChannelC8893C |
|
| Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890C). | |
 |
9U 450mm Deep 19" Rack Frame Panel SetH5609 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
 |
15U Rack Cable Support TrayH5575 |
|
| These cable trays bolt to one of the upright sections in a rack frame and allow equipment leads to be cable tied neatly to the tray. This reduces the stress on the leads and also the risk of equipment becoming disconnected accidentally. | |
 |
3 Pin XLR & Stereo RCA Input UTP Balun Wal...A4824 |
|
| This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
Carry Bag to suit C7310-C7314C7320 |
| Durable zip up carry bag to protect your portable PA system from the elements. | ||
 |
Tour Guide System 2 Way Charging DockC8813 |
| A dual charging dock suitable for use with both the C 8810 and C 8812 tour guide system units. | ||
|
15U 600mm Deep 19" Rack Frame Panel SetH5455 |
|
| Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels. 15U. 600mm deep. To add ventilation, we suggest using the H5603 vented top panel. | |
|
4U 450mm Deep 19" Rack Frame Panel SetH5604 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
 |
3 pin XLR Wallplate with Microphone ClipC0449 |
|
| This 3 Pin XLR wall plate are fitted with a clip for holding. fist type CB microphones. | |
 |
Volume Control 40W 100V Line Clipsal Pro -...A2237 |
| This 40W volume control is designed for 100V line speaker systems. The volume control is fitted to a black Clipsal Pro Series wall plate which has been specifically designed for commercial building installations. | ||
 |
3 Pin XLR Line/Balanced Input UTP Balun Wa...A4820 |
|
| This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
 |
Microphone Banquet Type Desk StandC0505A |
| Telescopes both vertically and horizontally. Swivel adjustment on horizontal arm. 5/8"" thread adaptor supplied. Heavy cast base. | ||
 |
600mm Deep 19" Rack Frame Bottom PanelH5601 |
|
| A top of bottom panel to suit 600mm rack frames. Powdercoated black. | |
|
6U 450mm Deep 19" Rack Frame Panel SetH5606 |
|
| These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi | |
 |
4.3" Zone Touch Wallplate For Source Contr...A4462 |
|
| This 4.3" touchscreen control wall plate allows for remote source selection and level control in Redback source control systems (currently compatible with A4450, A4460 and A4650 systems). | |
 |
20W Bluetooth 5.0 Mini Portable PA SystemC7124 NEW |
|
| A compact portable PA system with headset, providing a way to increase the volume of your voice when addressing small crowds. | |
 |
3U / 3RU Raw Aluminium 19" Rack Blanking P...H5113 |
|
| Ideal for professional looking custom switch panels, control panels or to fill in blank spaces of rack frames. All models feature integral ribs on the rear for extra strength and rigidity of the panel. | |
 |
Portable PA Cover To Suit C721X 30W SeriesC7215 |
| Bag to suit Okayo portable PA models, C7206, C7207 and C7210. | ||
 |
Protective Pouch To Suit C7195A/B BeltpackC7200 |
| Protective poromeric pouch to suit C7195A or C7195B beltpack lavalier transmitter. | ||
 |
Universal Remote Alarm WallplateA4576 |
|
| Designed for both 12V and 24V operation, this wallplate will sound a buzzer and illuminate an LED indicator when activated. A cancel button allows buzzer to be switched off, whilst the LED remains on. Connects with standard figure 8 cable and operates onc | |
 |
Stereo RCA and 3.5mm Jack Input UTP Balun ...A4821 |
|
| This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). | |
|
24U 600mm Deep 19" Rack Frame Panel SetH5464 |
|
| Panel sets provide a neat finish, concealing all enclosed equipment and prevent unauthorised access to the rack. Each set includes a solid top panel and two side panels. 24U. 600mm deep. To add ventilation, we suggest using the H5603 vented top panel. | |
 |
600mm Deep 19" Rack Frame Louvered Top PanelH5603 |
|
| A vented steel panel designed to suit the range of 600mm rack frames. It is louvered to allow heat to flow up and away from the cabinet but reduce the amount of dust and dirt collected on top of the equipment within the rack. |
Designed & manufactured in Australia.
Backed by an industry leading 10 Year Manufacturer Warranty.
