|
Description |
Downloads |
Specs |
Ordering |
|
|
C7124 NEW
|
|
- 20W power output
- 12-15 hours usage between charges
- Includes high performance wireless headset for a high level of clarity
- Body worn or self standing
- Bluetooth 5.0 for up to 200m range
- Micro SD card slot & USB A for media playback and recording
- TWS pairing to a second unit
- Ideal for training, demonstration and education environments
- USB type C rechargeable (cable included)
- Aux and mic inputs (3.5mm cable included)
- USB mains charger included
|
|
A compact portable PA system with headset, providing a way to increase the volume of your voice when addressing small crowds. |
|
C7192B |
|
- Exceptional performance
- Textured body
- Requires 2 x AA batteries, either alkaline (14 hour use) or rechargeable (11 hours use).
|
|
Handheld transmitter. 640-664MHz. Please ensure your system is compatible with this frequency before making your purchase. |
|
C7315B |
|
- Exceptional performance
- Slimline design
- Can be stored inside the PA unit for convenient recharging
- Up to 14 hours use from standard alkaline AA batteries
|
|
Handheld transmitter. 520-544MHz. Designed for use with the C 7310-C 7314 range of 40 Watt portable PA systems. Unique design allows it to be stored and charged within a slot at the rear of the PA system. |
|
A4201 |
|
- SPECIFCATIONS:
- Power Output: 50 Watts RMS x 2 into 8 ohm
- Total Harmonic Distortion: <0.01% @30W; <5.0% @50W
- Minimum Speaker Impedance: 6 ohm
- Signal-to-Noise Ratio: 103 dB, A weighted
- Input Impedance: 2k ohm ± 5%
- Frequency response: 20-20,000 Hz
- Channel Separation: 95 dB
- Efficiency: 85%
- Dynamic Range: >100 dB
- Electrical Requirement: 24V DC @ 5A centre pin positive
- Dimensions: 50H x 86W x 143D mm
- Weight: 455g
- BLUETOOTH SPECIFICATIONS:
- Bluetooth version: BT V5.0
- Analog input sensitivity: 1-2V RMS
- Bluetooth range: 30m (line of sight)
- Decoding: SBC, MP3, AAC
- Output: A2DP, AVRCP
|
|
A compact, sturdy 2x50W RMS class-D stereo amplifier with 3.5mm input on the front and RCA input on the back for easy connection. |
|
D0990A |
|
- Dual mic inputs allowing for two people streaming or recording
- Bluetooth Wireless Accompaniment Music Input
- Supports MIDI or instrument input
- Independent mic and aux volume controls
- Sidechain compression for vocal emphasis
- Four pitch changers
- Four reverb modes
- 12 step electronic music key control
- Advanced noise cancelling circuitry
- 3 analogue outputs to stream to multiple devices
- Built in battery for up to 8 hours use in a portable application
- Compatible with Android, iOS, Windows and Mac OS
- Includes USB C charge/data cable, tripod, microphone cable & 2 x TRRS audio cables
- USB powered
|
|
The Caster Lite package is a podcast production studio designed to work with smartphones, tablets and computers. It is plug-and-play on iOS, Android, Windows and MacOS with no additional drivers required. |
|
A4915 NEW
|
|
- 2 inputs to 1 output
- Suitable for mic or line signals
- Input 1 vox mutes input 2
- Separate controls for volume and vox sensitivity
- Vox operated 24V DC output for control of external devices
- Compact design
- 24V DC operation via 2.1mm DC jack (plugpack sold separately)
- Australian designed and manufactured
|
|
This compact 2 input mixer accepts either a line level signal or balanced microphone signal for each input. |
|
A4832 |
|
- Design Transceiver and Receiver in one Module
- Provides the Power to Connected Receivers
- Sends Left and Right Audio Channels
- Unbalanced Stereo RCA Input from Audio Source
- Balanced 3.5 Jack Audio Input from Mono Source
- Audio Signal Goes to two UTP RJ45 Outputs
- CSP Receiver Compatible with all 2 pair transceiver wallplates
- Two RCA stereo unbalanced outputs
- L (Left) Output Goes to Pair B; R (Right) Goes to Pair C
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
A compact system hub for interfacing input and output wallplates together with existing zone audio amplifiers and audio sources. |
|
A4835 |
|
- CSP transfer protocol with Dante compatible converters available (see A 4830/31)
- Local power input (powered at one end of cable run)
- Maximum distance over Cat6 cable: 1200 metres.
|
|
This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances. |
|
A4960 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4962 microphone transceiver which provides output to PA amplifier.
|
COMING SOONThis item is arriving soon. |
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
|
CL8893D NEW
|
|
- USB rechargeable with internal lithium battery
- Can be used with a range of Redback mini XLR headsets and lapel microphones
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
|
|
Wireless lavalier beltpack 700 channel transmitter ideal for use with the Redback® 700 channel receiver unit (C8890D). |
|
H5612 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi |
|
H5615 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi |
|
A5432 |
|
|
|
Installed in each zone, this optional wallplate enables selection of input source, volume setting and mute function. A local 3.5mm jack input is provided for connection to iPod or similar. This input automatically mutes signals from the A 5430 unit. Each |
|
C7189C |
|
- C 7217C 100W Portable PA With 520-544MHz UHF Receiver
- C 7220C 100W Portable PA With 520-544MHz UHF Receiver & CD/MP3 Player
|
|
This Wireless Link Transmitter is an optional extra for the Okayo Compact 50W and 100W Portable PA Systems. It operates on 520-544MHz, please check your system specification/model before making your purchase.
For larger venues or audiences, |
|
C7192C |
|
- Exceptional performance
- Textured body
- Requires 2 x AA batteries, either alkaline (14 hour use) or rechargeable (11 hours use).
|
|
Handheld transmitter. 520-544MHz. Please ensure your system is compatible with this frequency before making your purchase. |
|
C7203C |
|
- C 7202C 80W Portable PA With 520-544MHz UHF Receiver
- C 7344B 40W Portable PA With 520-544MHz UHF Receiver, MP3 & Bluetooth
- C 7344C 40W Portable PA With 520-544MHz UHF Receiver, MP3 & Bluetooth
- C 7310 Compact 40 Watt Portable PA System
- C 7281A Wireless Link Desktop 520-544MHz UHF Receiver
|
|
This Wireless Link Transmitter is an optional extra for the Okayo Compact 40W and 80W Portable PA Systems. It operates on 520-544MHz, please check your system specification/model before making your purchase.
For larger venues or audiences, |
|
C8810 |
|
- Automatic channel synchronisation between guide and visitors.
- Includes high performance lapel microphone with tie clip.
- 50m transmission range - ideal for larger groups.
- 60 channels in the 520-544MHz frequency range.
- Fitted with belt/pocket clip.
- Clear and noise free reception.
- Charging stations available.
|
|
A durable lightweight transmitter & lapel mic combination designed for use with the C 8812 tour guide receiver. |
|
A4935 |
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier. |
|
C8884 |
|
- Multilevel high and mid frequency narrowband filters
- Advanced noise detection and control
- Tone key linked identity to reduce interference
- Operating frequencies 520 / 524 MHz
- RF signal presence indicator LEDs for channels A and B
- Range of up to 60m in ideal conditions open air
- 6.35mm unbalanced line mix output
- 3-pin balanced XLR mic output for channels A and B
- Screen shows parameters for both channels
- Plug pack included
- 4 x AA batteries included
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 1/2 rack mount cabinet is fitted with 2 channel fixed frequency wireless receiver. |
|
H5709A |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
These lockable perspex doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. |
|
C7195C |
|
- Compact & lightweight with metal housing
- Fitted with Mini XLR 3 Pin socket
- On / Off / Mute switch
- Requires 2 x AA batteries, either alkaline (14 hour use) or NiMH rechargeable (11 hours use).
|
|
Beltpack transmitter. 520-544MHz. Please ensure your system is compatible with this frequency before making your purchase. |
|
A4476 |
|
- Remote preset selection
- Cat5e connection
- LCD indicates presets available
|
|
The A4476 wallplate is used to provide local access to presets programmed into the A4480B. |
|
A2655 NEW
|
|
- All inputs top mounted for easy access
- Combo XLR and 6.35mm jack inputs on channels 1-6
- Bluetooth audio reciever
- 24 bit 48KHz DSP effects with preset adjustment and level
- Adjustable aux return level
- USB MP3 recording and playback
- LED VU meter
- Monitor & phones outputs
- Aux send and return
- Foot switch input
- 48V phantom power
|
|
A lightweight and compact USB powered mixer featuring 14 channels. Channels 1 to 6 are XLR/6.35mm combo sockets suitable for both mic and line level signals. |
|
A1720C NEW
|
|
- Custom tracks
- Inbuilt tone & phrase library
- 12-30V DC operation @ 300mA (switched output only operates at 24V+).
- Micro SD card included
- All connections made via screw terminals
- Tones conform to Australian standard
- Provision for voice over in evacuation mode
- Random play on triggers - if multiple MP3s in trigger folder, they will be played at random.
- Optional MP3 playback on trigger cancel (alternate mode only)
- Compact size: 120 x 70mm
|
|
The A 1720C is an MP3 based message player and tone generator designed for public address, security, customer direction or emergency evacuation announcements. |
|
A4017 |
|
- To mount any of the Redback half rack products into a 19" wide racking system, the H 4990 bracket is required. If a single product is mounted into the H 4990, then a metal (H 4992) or plastic (H 4993) infill panel can be fitted for a neater finish.
|
|
Super compact with surprising performance specifications, intended for smaller PA system applications. Our engineering team based the design around a National TDA1519 monolithic IC achieving virtually "destruction proof" operation under quite severe misuse |