Description Ordering
A4950 Paging Microphone Chime Module

Paging Microphone Chime Module

A4950

By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal.
A4835 Active Three Pair Audio Signal Distribution Receiver

Active Three Pair Audio Signal Distributio...

A4835

This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances.
A4948  Line Level Compressor/Limiter

Line Level Compressor/Limiter

A4948

This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal.
A4822 Stereo RCA Input UTP Balun Wallplate

Stereo RCA Input UTP Balun Wallplate

A4822

This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4828 Stereo RCA Jack Output UTP Balun Wallplate

Stereo RCA Jack Output UTP Balun Wallplate

A4828

This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A2080C Selection Panel 10 Zone PA

Selection Panel 10 Zone PA

A2080C

Enables the control of paging and background music over 10 speaker zones. An incoming signal is thus selectable to the zones required.
A4932 Balanced Microphone/Line Pre Amplifier

Balanced Microphone/Line Pre Amplifier

A4932

This mic/line pre-amp wallplate accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to the A 4930 Hub.
A4946 RCA to Cat5 Extender (Receiver)

RCA to Cat5 Extender (Receiver)

A4946

The Redback A 4946 receives audio from compatible Redback Cat5e/6 transmitters, converts the signal to line level and outputs to RCA and 3.5mm connectors.
A4460 4x8 Stereo Audio Switcher System

4x8 Stereo Audio Switcher System

A4460

Designed to distribute 4 stereo audio input sources to 8 stereo output zones, this system is ideal for use in function centres, hotels, meeting rooms and domestic homes etc. It sends audio sources from one room to another with total ease.
A4944 RCA to Cat5 Extender (Transmitter)

RCA to Cat5 Extender (Transmitter)

A4944

The Redback® A 4944 provides a convenient way to send line level RCA audio signals over long distances via Cat5/6 cabling. The unit has DIP switch selectable input sensitivities of 100mV and 1V to handle inputs of varying levels.
A4941  3 Pin XLR Transmitter Wallplate

3 Pin XLR Transmitter Wallplate

A4941

This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4954  5 Pin XLR Cat5 Extender (Receiver)

5 Pin XLR Cat5 Extender (Receiver)

A4954

The Redback® A 4954 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output with PTT connection.
A4952  5 Pin XLR Cat5 Extender (Transmitter)

5 Pin XLR Cat5 Extender (Transmitter)

A4952

This handy interface box allows balanced signals to be transmitted over long distances using economical UTP data cabling, and provides easy local zone connection for audio sources.
A4953  5 Pin XLR Transmitter Wallplate

5 Pin XLR Transmitter Wallplate

A4953

This handy interface wallplate allows balanced signals to be transmitted over long distances using economical UTP data cabling.

All prices include GST