Description Ordering
A4597 Fire Alarm Test Wallplate to suit A4565A or A4595A

Fire Alarm Test Wallplate to suit A4565A o...

A4597

This remote wallplate interfaces with a building fire evacuation control board to offer simple fire alarm test triggering.
H5379A 2U 350mm Deep 19

2U 350mm Deep 19" Lockable Rack Drawer

H5379A

Ideal for holding ancillary items within a rack. Tough powdercoated finish. Supplied in flat pack format which assembles in minutes. Size: �W x 350D x 88Hmm
A4904 1 In to 2 Out Audio Splitter

1 In to 2 Out Audio Splitter

A4904

This compact signal splitter is provided with two input sockets. The 3 pin XLR can be configured for either 3mV or 1V sensitivity, whilst the RCA auxiliary input can be set for either 100mV or 1V sensitivity.
C0369 Redback Phantom Powered Lectern Microphone

Redback Phantom Powered Lectern Microphone

C0369 ROHS

This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. It is ideal for installations requiring the use of a high performance non-obtrusive microphone. The slimline design of this mic
C8893C Wireless UHF Beltpack Mic 700 Channel

Wireless UHF Beltpack Mic 700 Channel

C8893C

Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890C).
A4834 Active Three Pair Audio Signal Distribution Transmitter

Active Three Pair Audio Signal Distributio...

A4834

This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances.
C8841A Ceiling Mount High Gain UHF Mic System Antenna

Ceiling Mount High Gain UHF Mic System Ant...

C8841A

Suitable for Redback radio microphone installations requiring extended operating range ie: supermarkets, shopping malls, function centres etc. Provides 9dB of gain at 800MHz enabling installation up to 50m from the receiver when using
C8862B Wireless Electret UHF Mic Handheld 16 Ch 520-550MHz

Wireless Electret UHF Mic Handheld 16 Ch 5...

C8862B

Suits C 8860B 520-550MHz Receiver. Handheld Transmitter: - Exceptional performance. - Anti-roll band - Textured body - Requires 2 x AA batteries (either alkaline or rechargeable).
H5750A 9U Steel 19

9U Steel 19" Rack Door

H5750A

These lockable vented steel doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike.
A4578 Remote Control Wallplate to suit A4565A & A 4500B

Remote Control Wallplate to suit A4565A & ...

A4578

Allows the A4565A alert/evac unit to be activated remotely. Featuring alert, evacuation and cancel buttons with protective "flip up" covers to prevent accidental operation.
CL8894D Charging Dock To Suit CL8892D / CL8893D Mic Transmitters

Charging Dock To Suit CL8892D / CL8893D Mi...

CL8894D NEW

A dual charging dock suitable for use with CL8892D and CL8893D USB C rechargeable microphone transmitters.
H5554 1.8m Rack Mounting Strip Pair

1.8m Rack Mounting Strip Pair

H5554

Turn your custom cabinet into a rack cabinet. Ideal for use in road cases or custom timber cabinets. Sold as a pair. NOTE: Due to the size of this product we are only able to ship via road freight so when ordering allow extra time for delivery
H5606 6U 450mm Deep 19

6U 450mm Deep 19" Rack Frame Panel Set

H5606

These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi
H5380A 3U 350mm Deep 19

3U 350mm Deep 19" Lockable Rack Drawer

H5380A

A 3RU 19" rack drawer with 350mm depth, ideal for holding any patch leads, connectors, tools, etc within a rack frame. Tough powdercoated finish. Size: 430W x 350D x 130Hmm
C0361 Electret Shotgun Microphone

Electret Shotgun Microphone

C0361

This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adju
A4820 3 Pin XLR Line/Balanced Input UTP Balun Wallplate

3 Pin XLR Line/Balanced Input UTP Balun Wa...

A4820

This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4822 Stereo RCA Input UTP Balun Wallplate

Stereo RCA Input UTP Balun Wallplate

A4822

This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
A4827 3 Pin XLR Line/Balanced Output UTP Balun Wallplate

3 Pin XLR Line/Balanced Output UTP Balun W...

A4827

This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
C8893D Wireless UHF Beltpack Transmitter 700 Channel

Wireless UHF Beltpack Transmitter 700 Channel

C8893D

Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890D).
A4940  3 Pin XLR Cat5 Extender (Transmitter)

3 Pin XLR Cat5 Extender (Transmitter)

A4940

Allows balanced signals to be transmitted over long distances using economical UTP data cabling.
A4942 3 Pin XLR Cat5 Extender (Receiver)

3 Pin XLR Cat5 Extender (Receiver)

A4942

The Redback® A 4942 receives audio from compatible Redback® Cat5e/6 transmitters and converts the signal to a balanced XLR output. The output level is DIP switch selectable, and the ouput volume is screwdriver adjusted via the trimpot on the front of the unit.
A4944 RCA to Cat5 Extender (Transmitter)

RCA to Cat5 Extender (Transmitter)

A4944

The Redback® A 4944 provides a convenient way to send line level RCA audio signals over long distances via Cat5/6 cabling. The unit has DIP switch selectable input sensitivities of 100mV and 1V to handle inputs of varying levels.
A4946 RCA to Cat5 Extender (Receiver)

RCA to Cat5 Extender (Receiver)

A4946

The Redback A 4946 receives audio from compatible Redback Cat5e/6 transmitters, converts the signal to line level and outputs to RCA and 3.5mm connectors.
A4950 Paging Microphone Chime Module

Paging Microphone Chime Module

A4950

By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal.
A4948  Line Level Compressor/Limiter

Line Level Compressor/Limiter

A4948

This compact module is designed to go inline with an audio input source like CD/Blu-Ray etc to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal.

All prices include GST