|
Description |
Downloads |
Specs |
Ordering |
|
|
A2655 NEW
|
|
- All inputs top mounted for easy access
- Combo XLR and 6.35mm jack inputs on channels 1-6
- Bluetooth audio reciever
- 24 bit 48KHz DSP effects with preset adjustment and level
- Adjustable aux return level
- USB MP3 recording and playback
- LED VU meter
- Monitor & phones outputs
- Aux send and return
- Foot switch input
- 48V phantom power
|
|
A lightweight and compact USB powered mixer featuring 14 channels. Channels 1 to 6 are XLR/6.35mm combo sockets suitable for both mic and line level signals. |
|
A4476 |
|
- Remote preset selection
- Cat5e connection
- LCD indicates presets available
|
|
The A4476 wallplate is used to provide local access to presets programmed into the A4480B. |
|
C7195C |
|
- Compact & lightweight with metal housing
- Fitted with Mini XLR 3 Pin socket
- On / Off / Mute switch
- Requires 2 x AA batteries, either alkaline (14 hour use) or NiMH rechargeable (11 hours use).
|
|
Beltpack transmitter. 520-544MHz. Please ensure your system is compatible with this frequency before making your purchase. |
|
H5709A |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
These lockable perspex doors may be mounted on the front or rear of the rack. Note, a pop-rivet gun is required for attaching door to the rack frame. Add 30mm to the depth measurement of your rack per door. All doors are keyed alike. |
|
HD5215 NEW
|
|
- 15RU rack height.
- Open frame design with side load wall mounting (equipment is 90° to the wall face)
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
|
COMING SOONThis item is arriving soon. |
This 15RU 19" open rack frame allows you the option of side mounting to the wall surface, or use as a freestanding rack on castors. |
|
C8884 |
|
- Multilevel high and mid frequency narrowband filters
- Advanced noise detection and control
- Tone key linked identity to reduce interference
- Operating frequencies 520 / 524 MHz
- RF signal presence indicator LEDs for channels A and B
- Range of up to 60m in ideal conditions open air
- 6.35mm unbalanced line mix output
- 3-pin balanced XLR mic output for channels A and B
- Screen shows parameters for both channels
- Plug pack included
- 4 x AA batteries included
|
|
For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 1/2 rack mount cabinet is fitted with 2 channel fixed frequency wireless receiver. |
|
A4935 |
|
- Standard dual gang wallplate
- Connects via RJ45 UTP cabling
- Mixed audio output
- Connects to A 4942 balanced UTP receiver or other Redback UTP compatible products.
- Individual & master level controls
- Stereo RCA input
- 24V DC input via Cat5 UTP cable from connected equipment
- 3 pin XLR mic/line level inputs
|
|
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single receiver for connection to a zone amplifier. |
|
C8810 |
|
- Automatic channel synchronisation between guide and visitors.
- Includes high performance lapel microphone with tie clip.
- 50m transmission range - ideal for larger groups.
- 60 channels in the 520-544MHz frequency range.
- Fitted with belt/pocket clip.
- Clear and noise free reception.
- Charging stations available.
|
|
A durable lightweight transmitter & lapel mic combination designed for use with the C 8812 tour guide receiver. |
|
C7189C |
|
- C 7217C 100W Portable PA With 520-544MHz UHF Receiver
- C 7220C 100W Portable PA With 520-544MHz UHF Receiver & CD/MP3 Player
|
|
This Wireless Link Transmitter is an optional extra for the Okayo Compact 50W and 100W Portable PA Systems. It operates on 520-544MHz, please check your system specification/model before making your purchase.
For larger venues or audiences, |
|
C7192C |
|
- Exceptional performance
- Textured body
- Requires 2 x AA batteries, either alkaline (14 hour use) or rechargeable (11 hours use).
|
|
Handheld transmitter. 520-544MHz. Please ensure your system is compatible with this frequency before making your purchase. |
|
C7203C |
|
- C 7202C 80W Portable PA With 520-544MHz UHF Receiver
- C 7344B 40W Portable PA With 520-544MHz UHF Receiver, MP3 & Bluetooth
- C 7344C 40W Portable PA With 520-544MHz UHF Receiver, MP3 & Bluetooth
- C 7310 Compact 40 Watt Portable PA System
- C 7281A Wireless Link Desktop 520-544MHz UHF Receiver
|
|
This Wireless Link Transmitter is an optional extra for the Okayo Compact 40W and 80W Portable PA Systems. It operates on 520-544MHz, please check your system specification/model before making your purchase.
For larger venues or audiences, |
|
A5432 |
|
|
|
Installed in each zone, this optional wallplate enables selection of input source, volume setting and mute function. A local 3.5mm jack input is provided for connection to iPod or similar. This input automatically mutes signals from the A 5430 unit. Each |
|
H5612 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi |
|
H5615 |
|
- Designed & manufactured in Australia.
- This Zip-Rack 19 inch rack product is designed and manufactured locally. For over 40 years Altronics has provided quality locally made racking system products for professional audio and communications use. Support local manufacturing and buy Australian! Read more about our Australian Made products
|
|
These racking systems have been designed for audio and communication systems. They are durable, strong , good looking, lightweight, easy to assemble and suit the modern day office environment. There are two series to choose from, black 450mm deep for audi |
|
CL8893D NEW
|
|
- USB rechargeable with internal lithium battery
- Can be used with a range of Redback mini XLR headsets and lapel microphones
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
|
|
Wireless lavalier beltpack 700 channel transmitter ideal for use with the Redback® 700 channel receiver unit (C8890D). |
|
A4960 NEW
|
|
- Ideal for networking multiple microphones in supermarkets and hardware stores
- Loop in/loop out wiring with provision for tee-offs to remote points
- Connects to Redback A4962 microphone transceiver which provides output to PA amplifier.
|
|
Designed for systems that use a large number of Redback C0325/6 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. |
|
A4598 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A 4595A. All switches have safety covers to prevent accidental triggering. If a tone is triggered by the main unit or a paging console the corresponding switch on the wall plate will illuminate. |
|
A4581 |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Allows the A4565A & A4500B alert/evac units to be activated remotely. Featuring alert, evacuation and cancel buttons with protective "flip up" covers to prevent accidental operation. |
|
A4599 |
|
- Allows remote activation of the A4505 Controller.
- Connection is made via Cat5e cable up to a maximum range of 300m.
- Protective “flip up” covers. to prevent accidental operation.
- Dual Facia covers included.
- Fits standard electrical wall boxes.
|
|
Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. |
|
A4581V |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The A4581V wall plate allows remote triggering of the Alert, Evacuation and Bell tones and the cancel function of the A4565A Alert/Evacuation Controller. |
|
A4598V |
|
-
- 100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
- Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
The remote wall plates provide the same functionality as the buttons on the front of the A4595A. |
|
A4599V |
|
- Allows remote activation of the A4505 Controller.
- Connection is made via Cat5e cable up to a maximum range of 300m.
- Protective “flip up” covers. to prevent accidental operation.
- Dual Facia covers included.
- Fits standard electrical wall boxes.
|
|
Redback WallPlate allows the A 4505 Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons, the plate can be located up to 100m away from the main unit. |
|
A4832 |
|
- Design Transceiver and Receiver in one Module
- Provides the Power to Connected Receivers
- Sends Left and Right Audio Channels
- Unbalanced Stereo RCA Input from Audio Source
- Balanced 3.5 Jack Audio Input from Mono Source
- Audio Signal Goes to two UTP RJ45 Outputs
- CSP Receiver Compatible with all 2 pair transceiver wallplates
- Two RCA stereo unbalanced outputs
- L (Left) Output Goes to Pair B; R (Right) Goes to Pair C
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
A compact system hub for interfacing input and output wallplates together with existing zone audio amplifiers and audio sources. |
|
A4835 |
|
- CSP transfer protocol with Dante compatible converters available (see A 4830/31)
- Local power input (powered at one end of cable run)
- Maximum distance over Cat6 cable: 1200 metres.
|
|
This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances. |
|
A4915 NEW
|
|
- 2 inputs to 1 output
- Suitable for mic or line signals
- Input 1 vox mutes input 2
- Separate controls for volume and vox sensitivity
- Vox operated 24V DC output for control of external devices
- Compact design
- 24V DC operation via 2.1mm DC jack (plugpack sold separately)
- Australian designed and manufactured
|
|
This compact 2 input mixer accepts either a line level signal or balanced microphone signal for each input. |