|
Description |
Downloads |
Specs |
Ordering |
|
![A2236 Volume Control 40W 100V Line Clipsal Pro - Vertical White](https://images.altronics.com.au/thb/a/A2236.jpg) |
A2236 |
|
|
|
Designed to control 100V line speaker systems these attenuators are fitted to industry standard wall plates and install into an electrical wall box. |
![A2275 Volume Control 40W 100V Line With 5 Way Input Switching](https://images.altronics.com.au/thb/a/A2275.jpg) |
A2275 NEW
|
|
- All wallplates assembled by Altronics are supplied with two facia clip on covers. These are designed to match your current decor. Simply clip on the desired cover after installation.
|
|
A combination of level control attenuator with 11 positions and 5 way audio source selector. |
![C0347 Windsock to suit C0361](https://images.altronics.com.au/thb/c/C0347.jpg) |
C0347 |
|
|
|
Used to negate breath noise and eliminate wind or breath “pop”. Suits C 0361 shotgun microphone. |
![C0346 Windsock to suit C0375](https://images.altronics.com.au/thb/c/C0346.jpg) |
C0346 |
|
|
|
Used to negate breath noise and eliminate wind or breath "pop". Size refers to inside diameter of windsock opening.7mm |
![C0348 Windsock to suit C8914](https://images.altronics.com.au/thb/c/C0348.jpg) |
C0348 |
|
|
|
Spare windsock to suit |
![C0341 Windsock to suit C9064 Altronics Aviation Headsets](https://images.altronics.com.au/thb/c/C0341.jpg) |
C0341 |
|
|
|
Used to negate breath noise and eliminate wind or breath 'pop'. |
![C8862B Wireless Electret UHF Mic Handheld 16 Ch 520-550MHz](https://images.altronics.com.au/thb/c/C8862B.jpg) |
C8862B |
|
- Exceptional performance.
- Anti-roll band
- Textured body
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Suits C 8860B 520-550MHz Receiver.
Handheld Transmitter:
- Exceptional performance.
- Anti-roll band
- Textured body
- Requires 2 x AA batteries (either alkaline or rechargeable). |
![D0987 Wireless Lapel Microphone To Suit iPhone](https://images.altronics.com.au/thb/d/D0987.jpg) |
D0987 |
|
|
|
This product is a smart wireless lapel microphone that provides professional quality recordings. |
![D0986 Wireless Lapel Microphone To Suit USB-C Devices](https://images.altronics.com.au/thb/d/D0986.jpg) |
D0986 |
|
- Polar Pattern: Omnidirectional
- Frequency: 2.4GHz (bluetooth)
- Frequency Response: 20Hz-20KHz
- Port: USB Type C
- Battery Capacity: 70mAh
- Bluetooth Version: V5.0
- Working Time: Up to 10 hours
- Charging Time: 80 minutes
- S/N Ratio: >64dBm
|
|
This product is a smart wireless lapel microphone that provides professional quality recordings. |
![C7189C Wireless UHF 520-544MHz Link Transmitter](https://images.altronics.com.au/thb/c/C7189C.jpg) |
C7189C |
|
- C 7217C 100W Portable PA With 520-544MHz UHF Receiver
- C 7220C 100W Portable PA With 520-544MHz UHF Receiver & CD/MP3 Player
|
|
This Wireless Link Transmitter is an optional extra for the Okayo Compact 50W and 100W Portable PA Systems. It operates on 520-544MHz, please check your system specification/model before making your purchase.
For larger venues or audiences, |
![C7203C Wireless UHF 520-544MHz Link Transmitter](https://images.altronics.com.au/thb/c/C7203C.jpg) |
C7203C |
|
- C 7202C 80W Portable PA With 520-544MHz UHF Receiver
- C 7344B 40W Portable PA With 520-544MHz UHF Receiver, MP3 & Bluetooth
- C 7344C 40W Portable PA With 520-544MHz UHF Receiver, MP3 & Bluetooth
- C 7310 Compact 40 Watt Portable PA System
- C 7281A Wireless Link Desktop 520-544MHz UHF Receiver
|
|
This Wireless Link Transmitter is an optional extra for the Okayo Compact 40W and 80W Portable PA Systems. It operates on 520-544MHz, please check your system specification/model before making your purchase.
For larger venues or audiences, |
![C7203B Wireless UHF 640MHz Link Transmitter](https://images.altronics.com.au/thb/c/C7203B.jpg) |
C7203B |
|
- C 7344 40W Portable PA With 640-664MHz UHF Receiver, MP3 & Bluetooth
- C 7310 Compact 40 Watt Portable PA System
- C 7281 Wireless Link Desktop 640-664MHz UHF Receiver
|
|
This Wireless Link Transmitter is an optional extra for the Okayo Compact 40W and 80W Portable PA Systems. It operates on 640MHz, please check your system specification/model before making your purchase. |
![C8864B Wireless UHF Beltpack 16 Ch 520-550MHz](https://images.altronics.com.au/thb/c/C8864B.jpg) |
C8864B |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR microphone
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Suits C 8860B receiver (520-550MHz)
Beltpack Transmitter:
- Compact & lightweight
- Fitted with 3 pin mini XLR microphone
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or recharge |
![C8893B Wireless UHF Beltpack Mic 700 Channel](https://images.altronics.com.au/thb/c/C8893B.jpg) |
C8893B |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or rechargeable).
- Note: Beltpacks are not supplied with a mic. Lapel mic to suit is C 8907.
|
|
Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890B). |
![C8893C Wireless UHF Beltpack Mic 700 Channel](https://images.altronics.com.au/thb/c/C8893C.jpg) |
C8893C |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890C). |
![C8893D Wireless UHF Beltpack Transmitter 700 Channel](https://images.altronics.com.au/thb/c/C8893D.jpg) |
C8893D |
|
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Beltpack transmitter ideal for use with the Redback 700 channel receiver unit (C 8890D). |
![CL8893D Wireless UHF Beltpack Transmitter 700 Channel (USB Rechargeable)](https://images.altronics.com.au/thb/c/CL8893D.jpg) |
CL8893D NEW
|
|
- USB rechargeable with internal lithium battery
- Can be used with a range of Redback mini XLR headsets and lapel microphones
- Compact & lightweight
- Fitted with 3 pin mini XLR socket
- On / Off / Mute switch
- Gain control
|
|
Wireless lavalier beltpack 700 channel transmitter ideal for use with the Redback® 700 channel receiver unit (C8890D). |
![C8892D Wireless UHF Handheld Condenser Mic 700 Channel](https://images.altronics.com.au/thb/c/C8892D.jpg) |
C8892D |
|
- Unidirectional condenser insert
- Exceptional performance
- Anti-roll band
- Textured body
- Requires 2 x AA batteries (either alkaline or rechargeable).
|
|
Wireless handheld 700 channel microphone ideal for use with the Redback 700 channel receiver unit (C 8890D). |
![CL8892D Wireless UHF Handheld Condenser Mic 700 Channel (USB Rechargeable)](https://images.altronics.com.au/thb/c/CL8892D.jpg) |
CL8892D NEW
|
|
- USB rechargeable with internal lithium battery
- Unidirectional condenser insert
- Exceptional performance
- Anti-roll band
- Textured body
|
|
Wireless handheld 700 channel microphone ideal for use with the Redback® 700 channel receiver unit (C8890D). |
![A2777D Yamaha RX-V4A 5.2 Surround Sound Receiver](https://images.altronics.com.au/thb/a/A2777D.jpg) |
A2777D |
|
- 5.2-channel 80 Watt surround sound with Dolby TrueHD and DTS-HD
- 4K120AB and 8K60B HDMI (with future update) with HDCP 2.3 and eARC (4 in/1 out)
- Dolby Vision™, Hybrid Log-Gamma and BT.2020
- Supports enhanced media and gaming - ALLM, VRR, QFT, QMS (with future update)
- Wi-Fi®, AirPlay 2®, Spotify Connect and Voice Control
- MusicCast multi-room audio app control
- Pandora®, Spotify, Amazon Music, SiriusXM, TIDAL, Deezer, iHeartRadio and more
- YPAO automatic room calibration
- MusicCast Surround-capable: add optional MusicCast speakers to provide wireless surrounds for a 5.1-channel setup
|
|
5.2 channel AV receiver with CINEMA DSP 3D, HDMI 4-in/1-out, wireless surround.Movie watchers are catered for with 4K Ultra HD as well as HDMI 2.0, BT.2020 compatibility and HDCP 2.2, HDR video. 80W RMS per channel. Four HDMI inputs. Wireless rear speaker capability. |
![A2776C Yamaha® RX-V385B 5.1 Surround Sound Receiver](https://images.altronics.com.au/thb/a/A2776B.jpg) |
A2776C |
|
- Bluetooth compatible for wireless music streaming This AV receiver is equipped with Bluetooth functionality to let you enjoy easy wireless music playback from smartphones and other devices. Yamaha Compressed Music Enhancer is now optimised for Bluetooth audio transmission to ensure that your music will have vivid, lively sound quality even during wireless playback.
- 4K Ultra HD full support with 4K60p, HDCP2.2 This AV receiver completely supports with the latest HDMI standards. Thanks to transmission of 4K video at 60 frames per second pass-through, you can fully enjoy the high definition video quality of 4K without degradation. It also adheres to the HDCP2.2 copyright protection standard for 4K video transmission.
- HDMI with 3D and Audio Return Channel 3D means the receiver can handle 3D signal data. The Audio Return Channel function enables data to be sent and received via the same HDMI cable, so you can hear the sound from the TV via a single HDMI cable, with no need for an extra optical cable.
- Discrete amp configuration for high sound quality This AV receiver was designed with a strong focus on achieving exceptionally high sound clarity. It employs a discrete amp configuration and a low jitter PLL circuit, which contribute to its excellent audio performance.
- AV setup guide app makes system setup easier AV Setup Guide is an app that makes it much easier to perform receiver setup, and also assists you with cable connections between the AV receiver and source devices. It guides you through various settings such as speaker connections, TV and source device connections and power amp assignment. System illustrations and actual AV receiver images help you understand how to make the connections between devices, for much quicker system setup. It is available in multiple languages. Designed for iOS and Android tablet.
- SCENE for one-touch start Pressing a SCENE button powers on the AV Receiver and selects the input source and DSP mode. You can re-set the buttons for different sources by selecting a source and DSP mode, then pressing a SCENE button for more than three seconds.
- HDMI CEC for easy operation Another benefit of HDMI is the availability of CEC functionality. When the unit is connected to a CEC compatible TV, it will turn on and off together with the TV, and you can use the TV remote to control the volume. CEC also provides advanced functionality with other components. For example, you can use the receiver’s remote unit to control player functions like Skip and Stop. NOTE: All connected devices must be HDMI CEC compatible. Some CEC compatible TVs / players may not work.
- YPAO sound optimisation for automatic speaker setup YPAO analyses the room acoustics and adjusts various audio parameters for optimum sound in just a few minutes. It’s like having a professional installer calibrate your system.
- HD audio with CINEMA DSP Yamaha’s exclusive CINEMA DSP technology supports playback of HD Audio (Dolby TrueHD, DTS-HD Master Audio, etc.), providing natural and expansive sound imaging.
- Virtual CINEMA FRONT provides irtual 5-channel surround sound with high quality and resolution Even when it is impossible to install surround speakers behind the listening position, Virtual CINEMA DSP reproduces virtual 5-channel surround sound filled with realism, with only two front speakers. With Virtual CINEMA FRONT, you will enjoy virtual 5-channel surround sound with higher quality and resolution by installing surround speakers at the front. You get more flexibility to arrange your speakers inside the room, along with easy enjoyment of high quality surround sound.
- Extra Bass provides rich bass reproduction, even with small speakers Yamaha’ s exclusive low-range enhancement technology delivers richer bass than you expect from the speaker size while maintaining good localisation and sound balance even with compact front speakers. When a subwoofer is used, it improves the volume of the entire low range of the speaker system, not only the front speakers, but also enhancing the bass from the subwoofer. You'll enjoy video and music with sound that has exceptional power and presence.
- Compressed Music Enhancer When music is encoded into a digitally compressed format like MP3, the frequency response suffers. Yamaha’s Compressed Music Enhancer employs sophisticated digital signal processing using exclusive algorithms to restore what was lost, so the music always sounds the way it should.
- Subwoofer Trim for improved sound imaging The Subwoofer Trim control enhances the low frequencies by avoiding overlap with the front speaker output. This will result in a cleaner, more focused sound stage while providing a seamless frequency response. When subwoofer frequency overlap occurs in conventional systems, the overall sound is “pushed” toward the subwoofer. Subwoofer Trim takes care of this by separating the low subwoofer frequencies cleanly, thus stabilising the front stage while providing a well-balanced enhanced bass sound.
- ECO mode lowers power consumption by 20%* Yamaha’s new ECO mode reduces power consumption by about 20%. It can be set from the top of the GUI menu. NOTE: Compared to power consumption when ECO mode is off (Yamaha measurement).
- Selectable auto power standby Auto Power Standby lets you save energy by selecting to turn off the power after 20 minutes, 2, 4, 8 or 12 hours.
|
|
The all-new RX-V385 model is wireless-enabled, with streaming from Bluetooth devices at the touch of a button. Movie watchers are also catered for with 4K Ultra HD as well as HDMI 2.0, BT.2020 compatibility and HDCP 2.2, HDR video. 70W RMS per channel. Four HDMI inputs. AM/FM analog tuner. |
![A4510B Yearly Programmable School Timer](https://images.altronics.com.au/thb/a/A4510B.jpg) |
A4510B NEW
|
|
- MP3 audio format for Bell, Prebell and Music timing outputs
- Random play of audio files for Prebell and Music activations
- Easy Windows based software timing event setup
- Daylight savings mode
- Local push button operation of Bell
- Switched 24VDC output for Bell, Prebell, Music and relay only (No audio) output activations
- Bell trigger for remote activation of the bell
- Pluggable screw terminal connections
- Auxiliary level output
- Battery backup of current time
- 24V DC operation
- Standard 2U 19” rack mount case
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
|
The A 4510B is an incredibly versatile, and easily programmed yearly timer housed in a convenient 2RU rack or desk mount chassis. The unit can be programmed for virtually limitless* timing events for each day of the year. |
![A4568 Zone Status Interface To Suit A4567](https://images.altronics.com.au/thb/a/A4568.jpg) |
A4568 |
|
-
100% developed, designed & assembled in Australia.
- Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 40 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
-
Backed by an industry leading 10 Year Manufacturer Warranty.
- Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
|
|
Designed to interface the A4567 Line monitoring unit with a fire indicator board. The addition of the A4568 enables you to monitor the status of each individual zone. |