|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4660 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
 |
A4661 NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
|
This paging console is designed to provide general paging to zones when connected to the Redback A 4450, A 4460 or A 4650 systems. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
 |
A4816 |
|
- Four Mic/Line XLR Inputs on Front Panel
- Terminal Block for Two Audio Outputs on Rear Panel
- Converts Mic or Line Audio Signals to Dante network
- Mic or Line is Selectable for Each XLR Input
- Switchable 48V Phantom Power for Each Mic XLR Input
- Adjustable Mic/LIne Gain from ‐20 dB to +20dB for Each XLR input (Two Audio Signal Outputs from Dante Network)
- Balanced or Unbalanced Signal Outputs
- High Resolution 24 Bit for DAC and ADC
- Power over Ethernet (PoE) or 24VDC power supply
- Provides High Quality of Preamplifier for microphones
- Excellent Audio quality with low noise
|
|
Dante Interface 4 x Mic/Line Inputs, 2 x Line Outputs |
 |
A4818 |
|
- Two Mic/Line XLR Inputs and one mini-jack input on Front Panel
- Terminal Block for Two Audio Outputs on Rear Panel
- One mini-jack output on front panel
- Converts Mic or Line Audio Signals to Dante network
- Mic or Line is Selectable for Each XLR Input
- Switchable 48V Phantom Power for Each Mic XLR Input
- Adjustable Mic/LIne Gain from ‐20 dB to +20dB for Each XLR input (Two Audio Signal Outputs from Dante Network)
- Stereo/Mono switch for mini-jack input and output
- Four audio signal outputs from Dante network
- Balance or unbalanced signal outputs
- Doesn't require special software
- High Resolution 24 Bit for DAC and ADC
- Power over Ethernet (PoE) or 24VDC power supply
- Provides High Quality of Preamplifier for microphones
- Excellent Audio quality with low noise
|
|
Dante Interface 4 x Mic/Line Inputs, 4 x Outputs |
 |
A4820 |
|
- Balanced MIC XLR Input
- Selector switch MIC GAIN
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45 jacks
- Power can be linked to the removable terminal
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
 |
A4821 |
|
- Mini / RCA(MONO) Jacks Audio Inputs
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45 jacks
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This Stereo RCA and 3.5mm Jack Wallaplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
 |
A4822 |
|
- RCA Jack Audio Inputs
- L (Left) Output Goes to Pair B; R (Right) Output Goes to Pair C
- Signal and Power Pair Pass-Through on RJ45 jacks
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
 |
A4824 |
|
- Balanced MIC XLR Input
- Selector switch MIC GAIN
- RCA Jack Audio Inputs
- XLR Goes to Pair A; L (Left) Goes to Pair B; R (Right) Goes to Pair C.
- Signal and Power Pair Pass-Through on RJ45 jack
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This 3 pin XLR Line/Balanced and Stereo RCA input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
 |
A4825 |
|
- Two Balanced Microphone XLR Inputs
- Switch-Selectable Mic Gain and 48V Phantom Power on Side Panel
- Output Pair Selectors to go to Pair (A, B or C) for Each MIC Input
- Signal and Power Pairs Pass-Through on RJ45 jacks
- Daisy-Chain with a Single-Pair UTP Sender
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This Dual 3 pin XLR Line/Balanced input wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
 |
A4826 |
|
- XLR / RCA Audio Output,
- Gain Switch XLR only
- Signals from Pair A(XLR), Pair B(L) and Pair C(R).
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
|
|
This 3 pin XLR Balanced and Stereo RCA output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates).
|
 |
A4827 |
|
- Balanced MIC XLR Output
- Selector switch MIC GAIN
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45 Jacks
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
This 3 pin XLR Balanced Output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
 |
A4828 |
|
- Stereo RCA Jack Audio Outputs
- Signals from Pair B(L) and Pair C(R).
- Source Loop
- Power can be linked to the removable terminal
- Blue LED Indicates Module is Powered
- Daisy chain topology
|
|
This Stereo RCA Jack output wallplate can be used in a stand-alone point to point basis, allowing balanced signals to be sent over long distances (up to 600m depending on cable used and configuration of plates). |
 |
A4830 |
|
|
|
Interfaces 1 input and 1 output CSP UTP wallplates with Dante® systems. |
 |
A4831 |
|
|
|
Interfaces 2 input and 4 output CSP UTP wallplates with Dante® systems |
 |
A4832 |
|
- Design Transceiver and Receiver in one Module
- Provides the Power to Connected Receivers
- Sends Left and Right Audio Channels
- Unbalanced Stereo RCA Input from Audio Source
- Balanced 3.5 Jack Audio Input from Mono Source
- Audio Signal Goes to two UTP RJ45 Outputs
- CSP Receiver Compatible with all 2 pair transceiver wallplates
- Two RCA stereo unbalanced outputs
- L (Left) Output Goes to Pair B; R (Right) Goes to Pair C
- Daisy chain topology
- AFC Design (AFC: Auto Feedback Gain Circuitry)
|
|
A compact system hub for interfacing input and output wallplates together with existing zone audio amplifiers and audio sources. |
 |
A4834 |
|
- Transmits three balanced audio signals or 3 unbalanced line level signals
- CSP transfer protocol with Dante compatible converters available (see A 4830/31)
- Local power input (powered at one end of cable run)
|
|
This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances. |
 |
A4835 |
|
- CSP transfer protocol with Dante compatible converters available (see A 4830/31)
- Local power input (powered at one end of cable run)
- Maximum distance over Cat6 cable: 1200 metres.
|
|
This audio distribution system uses affordable UTP cabling to send up to three balanced inputs (terminal block) or mono RCA signals over long distances. |
 |
A4860 |
|
- Class-D 2 x 50W amplifier
- Bluetooth 4.2 wireless streaming
- Stereo RCA & 3.5mm jack inputs
- Optical input with high performance DAC
- Automatic signal switching with priority for Bluetooth audio source
- 240V AC operation
|
|
A compact bluetooth stereo amplifier for home and commercial sound systems. Features a high spec Class-D 2x50W RMS amplifier and optical input for connection to digital audio sources. Pairs well with the A4861 200W subwoofer amplifer. |
 |
A4861 |
|
- 200W into 4 ohms
- Stereo RCA input
- Speaker level input and outputs
- Adjustable phase and crossover frequency
- Volume level control
- 240V AC operation
|
|
A compact dedicated subwoofer amplifier providing up to 200W into 4 ohms. Ideally paired with the A 4860 and C 1065 ceiling subwoofer, but is also suitable for any passive subwoofer. Ideal for integration with commercial systems in fashion boutiques, shopping centres, gymnasiums etc. Front panel provides level control, phase adjustment and crossov |
 |
A4865 NEW
|
|
- Interfaces with the Merlaud A4868 paging console and A4872 zone decoder boxes.
- Designed in conjunction between Altronics Redback PA team and Merlaud.
- Flexible design bridges the gap between IP PA systems and traditional analogue 100V line zone PA.
- Versatile design can be used in facilities with multiple buildings.
- Connects to ethernet switch (and to paging console and decoders) using UTP Cat6 cabling.
- Facilitates playback of alert and evacuation tones, schools bells and recorded messaging.
- Zone level do not disturb settings.
- BGM muting by PA, bell or emergency tones.
- Operates with 100V line override relays to ensure full volume evacuation warnings when initiated.
|
|
The zone encoder is a 19" rack mount audio encoder which works in conjunction with the Merlaud A4868 touchscreen paging console. |
 |
A4868 NEW
|
|
- Up to 24 zones of paging, BGM and message playback.
- Designed in conjunction between Altronics Redback PA team and Merlaud.
- Flexible design bridges the gap between IP PA systems and traditional analogue 100V line zone PA.
- Simple touchscreen operation.
- Versatile design can be used in facilities with multiple buildings.
- Connects to ethernet switch (and to paging console and decoders) using UTP Cat6 cabling.
- Facilitates playback of alert and evacuation tones, schools bells and recorded messaging.
- Zone level do not disturb settings.
- BGM muting by PA, bell or emergency tones.
- Operates with 100V line override relays to ensure full volume evacuation warnings when initiated.
|
|
This paging controller is the heart of the system where all commands are initiated. It provides zone PA selection, multi-zone recall, background music (BGM) selection and do not disturb settings. |
 |
A4872 NEW
|
|
- Interfaces with the Merlaud A4865 zone encoder to interface analogue PA systems with IP paging system.
- Designed in conjunction between Altronics Redback PA team and Merlaud.
- Converts all system audio singles back to analogue stereo RCA output (or speaker level) for connection to zone PA amp.
- Connects to ethernet switch (and on to paging console and encoder) using UTP Cat6 cabling.
- Versatile design can be used in facilities with multiple buildings.
- Facilitates paging, bell or emergency evacuation tones.
- Allows operation of 100V line override relays for full volume in evacuation conditions.
|
|
The zone decoder provides a way to interface traditional stereo and 100V line PA systems with the Merlaud IP communicator system. |
 |
A4874 NEW
|
|
|
|
Designed to work with the C0897 IP speaker & mic receiver system. |
 |
A4903A |
|
- Screw terminals for 100V input
- Microphone or line level balanced outputs (3 pin XLR)
- Line level unbalanced output (2 x RCA)
- Recessed volume control to prevent tampering
- Requires no power
- Minimal loading or signal loss
- Dimensions 133W x 45H x 55D mm.
|
|
This small adaptor receives a 100V signal from one amplifier and reduces the level down to either balanced mic level or auxiliary level to feed into the input of a second amplifier. |
 |
A4904 |
|
- 1 input to 2 outputs
- Adjustable input and output signals
- Individual volume controls for each output
- Internally selectable phantom power available on XLR input
- 24V dc operation
- Compact design, 25H x 105W x 81D mm
|
|
This compact signal splitter is provided with two input sockets. The 3 pin XLR can be configured for either 3mV or 1V sensitivity, whilst the RCA auxiliary input can be set for either 100mV or 1V sensitivity. |
