|
Description |
Downloads |
Specs |
Ordering |
|
|
M8060 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
|
N0225F
|
|
- Maximum power: 225W
- Nominal voltage: 24V
- Short circuit current (ISC): 6.44A
- Open circuit voltage: 43.20V
- Maximum power current (IMP): 6.25A
- Maximum power voltage: 36.0V
- Connection: MC-4 Plug
- Dimensions: 992 x 1316 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 225W 24V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This model is suitable for use in 24V battery systems or grid connected systems, large commercial solar installations etc. |
|
N0200F
|
|
- Maximum power: 200W
- Nominal Voltage: 12V
- Short circuit current (ISC): 10.34A
- Open circuit voltage: 24.8V
- Maximum power current (IMP): 9.62A
- Maximum power voltage: 20.8V
- Connection: MC-4 Plug
- Dimensions: 664 x 1630 x 35 mm
- Operating Temperature: -40°C to +85°C
|
|
This quality 200W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
|
S4528 |
|
- General
- Dimensions: 79L x 56W x 107H mm (including tabs)
- Weight: 1.1kg
- Charging
- 20 Hour Rate (10.5V): 2.9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 34MΩ
- Max Discharge Current: 43.5A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 0.87A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 2.9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
S4539 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28m Ohm
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 7Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
N1130F |
|
- High quality 130W mono-crystalline solar panel
- Portable camping power ensuring your batteries don't run flat
- Great for campers and caravan owners running a fridge or lighting from their vehicle batteries.
- 12V/10A regulator with USB output
- 5m cable with alligator clips
- Carry bag included
- 5 year workmanship warranty
- 25 year output warranty
|
|
Portable folding solar panel system (130W mono-crystalline type) for camping and caravans. This kit provides quick site power for your batteries ensuring your camping fridge is always on the go without the danger of your batteries running flat. It features a high performance weatherproof solar regulator with 3-stage battery charging circuit. |
|
N0110F |
|
- Maximum power: 110W
- Nominal voltage: 12V
- Short circuit current (ISC): 6.6A
- Open circuit voltage: 21.6V
- Maximum power current (IMP): 6.16A
- Maximum power voltage: 17.8V
- Connection: MC-4 Plug
- Dimensions: 664 x 1006 x 35 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 110W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. This size is commonly used in caravans, 4WDs and trade vehicles to provide battery backup maintenance, allowing low voltage appliances to be powered off the connected battery system. |
|
SL4547A
|
|
|
|
This 12Ah LiFEPO4 replacement battery is compatible in size with traditional 12Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
Q0592 |
|
|
|
This meter is used to monitor all kinds of battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, SOC, energy, running time and display the measurement data through the LCD screen. |
|
M8642 |
|
- Length: 300mm
- Cable type: 2 x 8AWG cable
- Input Connection: Ring Terminal (M8)
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- DC current rating: 50A
- Current Draw: 50A
|
|
This series of high current connectors are ideal for automotive, 4WD and caravan uses. The connectors are also suitable for industrial interconnection. |
|
N0004F |
|
- Maximum power: 4W
- Nominal voltage: 6V
- Short circuit current (ISC): 0.71A
- Open circuit voltage: 7.2V
- Maximum power current (IMP): 0.67A
- Maximum power voltage: 6V
- Connection: 0.5m bare end fly lead
- Dimensions: 239 x 189 x 18 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 4W 6V Polycrystalline solar panel module is designed for direct connection to a charge controller for battery charging (typically lithium cells). The compact size makes it perfect for battery maintenance in low power equipment. |
|
N2089 |
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- PV solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
|
M8062 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
|
N0040F |
|
- Maximum power: 40W
- Nominal voltage: 12V
- Short circuit current (ISC): 2.50A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 2.33A
- Maximum power voltage: 17.2V
- Connection: MC-4 Plug (1m lead)
- Dimensions: 664 x 408 x 25 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 40W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
|
M8649 |
|
- Cable length: 0.3m
- Cable type: 2 x 8AWG
- Dimensions details: Counduit
- Length: 220mm
- Diameter: 15mm
- Device: Plug and Socket Set
- DC current rating: 30A
|
|
This lead is ideal for automotive, 4WD and caravan uses. One end is an Anderson connector (50A) and on the other end is a PV connector. |
|
S4517 |
|
- General
- Dimensions: 97L x 43W x 58H mm (including tabs)
- Weight: 0.55kg
- Capacity
- 20 Hour Rate (5.25V): 1.3Ah
- 10 Hour Rate (5.25V): 1.1Ah
- 1 Hour Rate (4.8V): 0.78Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 95MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 0.36A
- Maximum Discharging Current: 18A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 1.3Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
Q0594 |
|
- Operating Voltage: 8.0V (min), 50.0V (regular), 120V (max)
- Working Power Consumption (Backlighting): 6.0mA (regular), 8.0mA (max)
- Standby Power Consumption (Backlit Off): 0.5mA (regular), 0.8mA (max)
- Sleep Power Consumption: 50.0µA (regular), 60.0µA (max)
- Voltage Acquisition Accuracy: ±1.0%
- Current Acquisition Accuracy: ±1.0%
- Capacity Acquisition Accuracy: ±1.0%
- Backlight Turn-On Current: 50mA
- The range of capacity values can be set: 0.1Ah (min), 100Ah (regular), 9999.0Ah (max)
- Sampler Current (50A): 0A (min), 50.0A (regular), 75A (max)
- Temperature Range: -10°C (min), 20°C (regular), 50°C (max)
- Weight: 150g
- Monitor Size: 66 x 40 x 14 mm
- Panel Cutout: 53.5 x 37.5. (hole centres 58mm).
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
|
N2003 |
|
- Suits 12V systems only
- Adjustable run time for connected load or “always on” configuration
- Overcharge, discharge, over current, short circuit (with recommended 3A fuse) and reverse polarity protection.
- Three stage PWM charge control
|
|
An ultra compact PWM solar charge controller for compact solar power systems using panels 40 Watts or less. |
|
S4552 |
|
- General
- Dimensions: 181L x 77W x 167H mm (including tabs)
- Weight: 5.9kg
- Capacity
- 20 Hour Rate (10.5V): 20Ah
- 10 Hour Rate (10.5V): 18.7Ah
- 1 Hour Rate (9.6V): 13Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- Charging
- Internal Resistance: Approximately 14MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 6A
- Maximum Discharging Current: 300A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 20Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
|
P7760 |
|
|
|
Anderson style grey 50A DC power connector. |
|
M8065 |
|
- Isolated design for maximum electrical safety
- Pure sine wave output
- Certified to Australian Standard AS/NZS 4763.2011
- Multi-function LCD readout
- DC/AC isolated design
- Safety authority tested for reliable & safe operation
- Over temperature, over voltage, over load and short circuit protection
- Low voltage cut off
- Excellent voltage regulation
- Binding post connection to battery
- Temperature controlled cooling fan.
|
|
This compact inverter is designed to deliver pure AC output for powering difficult loads such as appliances with switchmode power supplies (computers, displays & game consoles) and voltage sensitive devices. |
|
SL4581A
|
|
|
|
This 12V 150Ah LiFEPO4 replacement battery is compatible in size with traditional 150Ah SLA batteries, but with all the benefits of cutting edge lithium technology. |
|
SL4587A
|
|
|
|
This 12V 300Ah LiFePO4 replacement battery is compatible in size with traditional 300Ah SLA batteries, but with all the benefits of cutting edge lithium technology. LiFePO4 batteries offer longer service life than traditional lead acid batteries, plus weigh less than HALF as much as SLA batteries. |
|
N0020F |
|
- Maximum power: 20W
- Nominal voltage: 12V
- Short circuit current (ISC): 1.25A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 1.16A
- Maximum power voltage: 17.2V
- Connection: 0.5m bare end fly lead
- Dimensions: 410 x 351 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 20W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
|
M8640 |
|
- Length: 300mm
- AC current rating: 50A
- DC current rating: 50A
- Input Type: Anderson 50A 2 Pole
- Input Connection: Plug
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Output Quantity: 1pc
|
|
This double Anderson style piggyback adaptor cable allows you to split a single Anderson connector output into two. Ideal for connecting between battery and solar panels or between battery and DC appliances. Pre-made with tinned copper cable and machine crimped terminations. |