|
Description |
Downloads |
Specs |
Ordering |
|
 |
M8636A |
|
- Operates 8-60V DC
- Ideal for 12V or 24V DC electrical systems
- Displays volts, amps, watts and average watts
- Backlit LCD Screen
- Anderson style connectors for easy connection
- Use with fridges, solar panels, dual battery systems and battery packs.
|
|
The perfect solution for measuring input and output currents and wattage from solar panels or batteries. |
 |
Q0592 |
|
|
|
This meter is used to monitor all kinds of battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, SOC, energy, running time and display the measurement data through the LCD screen. |
 |
S4542 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.6kg
- Capacity
- 20 Hour Rate (10.5V): 9Ah
- 10 Hour Rate (10.5V): 8.4Ah
- 1 Hour Rate (9.6V): 5.9Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.7A
- Maximum Discharging Current: 135A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 9Ah sealed lead acid (SLA) battery is one of the most common size SLA batteries in use. |
 |
S4543 |
|
- General
- 151L x 65W x 100H mm (including tabs)
- Weight: 2.65kg
- Charging
- 20 Hour Rate (10.5V): 9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 18MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.52A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
N0010F |
|
- Maximum power: 10W
- Nominal voltage: 12V
- Short circuit current (ISC): 0.65A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 0.56A
- Maximum power voltage: 18.00V
- Connection: 0.5m bare end fly lead
- Dimensions: 364 x 230 x 18 mm
- Operating temperature: -40°C to +85°C
|
|
This quality 10W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
M8640 |
|
- Length: 300mm
- AC current rating: 50A
- DC current rating: 50A
- Input Type: Anderson 50A 2 Pole
- Input Connection: Plug
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Output Quantity: 1pc
|
|
This double Anderson style piggyback adaptor cable allows you to split a single Anderson connector output into two. Ideal for connecting between battery and solar panels or between battery and DC appliances. Pre-made with tinned copper cable and machine crimped terminations. |
 |
N0700A |
|
- Ideal for car, motorcycle, caravan or boat batteries
- Operates in all seasons
- Ideal size to charge & maintain 12V automotive batteries
- Tempered glass with aluminium framing
- Fitted with 2.4m lead & alligator clips
- Suits outdoor installation
- Suits standard vehicle batteries
- Crocodile Clip Connection
- Car Plug Connection
|
|
These compact monocrystalline solar panels are designed for keeping your car, caravan or 4WD batteries topped up when parked. Easy croc clip or car accessory plug connection. Can even be permanently installed outdoors. |
 |
P7812 |
|
|
|
Provides easy connection to solar panels and auxiliary batteries/appliances utilising 50A Anderson connection. |
 |
Q0591 |
|
- Electrical parameter measurement function (voltage, current, active power, energy)
- Voltage alarm function (over voltage alarm threshold, backlight and voltage flashing to alarm).
- The reset function of energy key.
- Store data when power off.
- Large-screen LCD (display voltage, current, active power, energy at the same time)
- Backlight function.
|
|
A complete power monitoring panel with voltage, current, power and energy consumption (Wh) displayed simultaneously. |
 |
N0005F |
|
- Maximum power: 5W
- Nominal voltage: 12V
- Short circuit current (ISC): 0.31A
- Open circuit voltage: 21.5V
- Maximum power current (IMP): 0.28A
- Maximum power voltage: 18.00V
- Connection: 0.5m bare end fly lead
- Dimensions: 230 x 205 x 18 mm
- Operating temperature: -40° to +85°C
|
|
This quality 5W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. The compact size makes it perfect for battery maintenance in low power equipment. |
 |
D0507E NEW
|
|
- Dual USB QC3.0 type A charging outputs
- USB C Power Delivery (18W) output / charging input.
- LED capacity indicators
- Universal design for charging all USB devices.
- Stylish design
|
COMING SOONThis item is arriving soon. |
Offering both QuickCharge 3.0 charging and 18 Watt USB-C PD output, this 10,000mAh power bank will keep your devices charged up on the go. |
 |
M8656 |
|
- Length: 300mm
- Cable type: 2 x 8AWG
- Input Connection: Ring Terminal (M8)
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Fuse: In-line 50A Maxi blade fuse
- Output Quantity: 2pc
- AC current rating: 50A
- DC current rating: 50A
- Current Draw: 50A
|
|
This Anderson style ring terminal adaptor cable allows you to permanently connect an Anderson style connection cable to your vehicles battery. |
 |
S4540 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.2kg
- Capacity
- 20 Hour Rate (10.5V): 7.2Ah
- 10 Hour Rate (10.5V): 6.7Ah
- 1 Hour Rate (9.6V): 4.67Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: <25mΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.16A
- Maximum Discharging Current: 108A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 7.2Ah sealed lead acid (SLA) battery is perhaps the most common size SLA battery in use. |
 |
P7787 |
|
- Connection: 1 x 50A Anderson Style Connector / USB Ports 1A/2.1A, Car Accessory Socket
- External Dimensions: 80 x 50 x 140 mm
|
|
This Anderson Style connector features an enclosure for surface mounting on vehicle cabinets or bodywork. |
 |
M8658 NEW
|
|
- Length: 300mm
- Cable type: 2 x 8AWG
- Input Connection: Anderson 50A 2 Pole
- Output Connection: Plug
- Output Type: Anderson 50A 2 Pole
- Fuse: In-line 50A Maxi blade fuse
- Output Quantity: 2pc
- AC current rating: 50A
- DC current rating: 50A
- Current Draw: 50A
|
|
This Anderson style ring terminal adaptor cable allows you to permanently connect an Anderson style connection cable to your vehicles battery. |
 |
M8639 |
|
- Ideal for connection between vehicle and caravan or trailer.
- 1m length
- Anderson style plugs
- Suitable for solar panels
- 50 Amp
- 2 x 8AWG cable
|
|
This lead is ideal for automotive, 4WD and caravan uses. This lead will provide you with extra length where required or enable the connection of a second solar panel. |
 |
S4501 |
|
- General
- Dimensions: 151L x 50W x 100H mm (including tabs)
- Weight: 1.75kg
- Capacity
- 20 Hour Rate (5.25V): 12Ah
- 10 Hour Rate (5.25V): 11Ah
- 1 Hour Rate (4.8V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 12MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 6V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
S4538 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28MΩ
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life, maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4539 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28m Ohm
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 7Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
Q0587 |
|
|
|
An adjustable battery capacity readout allowing you to display approximate battery levels for any battery between 1V and 100V. |
 |
S4530 |
|
- General
- Dimensions: 134L x 67W x 66H mm (including tabs)
- Weight: 1.35kg
- Charging
- 20 Hour Rate (10.5V): 3.5Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 32MΩ
- Max Discharge Current: 54A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 1.08A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 3.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4532 |
|
- General
- Dimensions: 90L x 70W x 107H mm (including tabs)
- Weight: 1.45kg
- Capacity
- 20 Hour Rate (10.5V): 4.5Ah
- 10 hour Rate (10.5V): 4.2Ah
- 1 Hour Rate (9.60V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 45MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8641 |
|
- Length: 300mm
- Cable: 2 x 8AWG
- Item Connection: Anderson Plug
- Vehicle Connection: Alligator Clamps
- Input Type: Anderson 50A 2 Pole
- Input Connection: Plug
- Output Connection: Plug
- Output Type: Alligator Clips
- Output Quantity: 1pc
|
|
This series of high current connectors are ideal for automotive, 4WD and caravan uses. The connectors are also suitable for industrial interconnection. |
 |
M8645 |
|
- Length: 300mm
- Cable type: 16AWG twin core
- Input Type: Anderson 50A 2 Pole
- Output Type: Cigarette Lighter 2x15A
|
|
This dual car accessory (cigarette lighter) socket to Anderson plug adaptor cable allows connection of DC appliances fitted with car accessory plugs to be powered from an Anderson extension cable. |
 |
M8650A |
|
|
|
This Anderson style plug adaptor cable suits a Waeco fridge. |
Powerhouse