| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
19V DC 3A Fixed 2.1mm Tip Appliance PowerpackM8946 |
|
| Super compact regulated power supply. 100V - 240V ac input. Energy authority approved and MEPS approved. Supplied with a fixed 2.1mm dc jack. | |
 |
1m 50A Anderson Style Extension Lead CableM8639 |
|
| This lead is ideal for automotive, 4WD and caravan uses. This lead will provide you with extra length where required or enable the connection of a second solar panel. | |
 |
1m IEC15 10A to 3 Pin Black Appliance Main...P8440 |
|
| IEC15 Female to 3 Pin 1m. Energy authority approved. | |
 |
2 Pin SAE Bullet Connector 30cm Power LeadM8610 |
| Supplied pre-terminated in a 30cm loop with mating SAE bullet connectors on each end. 18AWG cable 7.5A rated. | ||
|
2 Pin SAE Bullet Connector 3m Power LeadM8513 NEW |
| Supplied pre-terminated in a 30cm loop with mating SAE bullet connectors on each end. 18AWG cable 7.5A rated. | ||
 |
2 Way Universal Fast Battery Charger with LCDA0291 NEW |
|
| This intelligent charger has two independent charging slots to charge any combination of Ni-MH, Ni-Cd, Li-ion, or LiFePO4 cells at the same time. | |
 |
2 X AA Battery HolderS5025A ROHS |
|
| Dual AA Plastic battery holder. | |
 |
2 X AA Battery Holder With Crocodile ClipsSA5025 NEW |
| Dual AA Plastic battery holder. Supplied with Crocodile Clips. | ||
 |
2 X AA Battery Holder With Fly LeadsS5057 ROHS |
| Dual AA Plastic battery holder with fly leads. | ||
 |
2 X AA Battery Holder With On/Off SwitchS5042 ROHS |
| Features on/off switch and locking screw for battery cover. | ||
 |
2 X AA PCB Mount Flat Battery HolderS5027 ROHS |
| PCB Mount Flat Battery Holder to suit 2 x AA batteries. | ||
 |
2 X AA Waterproof Battery Holder IP65SW5042 |
| Protects your batteries and terminals from the elements. Screw together casing with rubber gasket. 140mm fly lead. | ||
 |
2 X AAA Battery HolderS5052 ROHS |
| Dual AAA Plastic battery holder. Supplied with fly leads. | ||
 |
2 X AAA Battery Holder With On/Off SwitchS5055 ROHS |
| Features on/off switch and locking screw for battery cover. | ||
 |
2.1mm DC Socket to 2.1mm 90 Deg. Plug LeadP6734 |
| 2.1mm Socket to 2.1mm right angle (90°) plug cable. Allows you to connect power to equipment with limited rear space behind equipment. Minimises cable strain and plug damage in tight spaces. | ||
 |
2.1mm Inline Switched DC Power LeadP8225 |
| A quick and easy way to switch plugpack powered devices on and off. Fitted with a 2.1mm plug and socket. | ||
 |
2.1mm x 5.0mm DC PlugM9197 |
| Size: 2.1 x 5.0 DC plugs size shows inside Ø and outside Ø. | ||
 |
2.1mm x 5.5mm DC PlugM9190 |
| Size: 2.1 x 5.5 DC plugs size shows inside Ø and outside Ø. | ||
 |
2.1mm x 5.5mm Right Angle DC PlugM9171 |
|
| Right angle reversible polarity connector to suit the Powertran range of plugpacks. Moulded in black plastic, with polarity indicators. | |
 |
2.4A Dual USB Car AdapterM8625A NEW |
|
| Provides two 2.4A USB charging outlets. Suitable for charging phones, tablets, drones, cameras and other devices. | |
 |
2.5mm DC Socket to 2.5mm 90 Deg. Plug LeadP6735 |
| 2.5mm Socket to 2.5mm right angle (90°) plug cable. Allows you to connect power to equipment with limited rear space behind equipment. Minimises cable strain and plug damage in tight spaces. | ||
 |
2.5mm Jack PlugM9192 |
| Size: 2.5 DC plugs size shows inside Ø and outside Ø. | ||
 |
2.5mm x 5.5mm DC PlugM9191 |
| Size: 2.5 x 5.5 DC plugs size shows inside Ø and outside Ø. | ||
 |
20000mAh 1000A Lithium Vehicle Battery Jum...M8194A NEW |
|
| This lithium battery pack is suitable for jump starting 12V battery equipped vehicles. The 20000mAh rating provides up to 1000A peak output when cranking. 60W USB C power delivery charging in built. | |
 |
20000mAh 2500A Lithium Vehicle Battery Jum...M8195B |
|
| This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
