|
Description |
Downloads |
Specs |
Ordering |
|
 |
S4569 |
|
- General
- Dimensions: 350L x 167W x 179H mm (including tabs)
- Weight: 21kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 65Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 8mΩ
- Max. Discharge Current: 650A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 19.5A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 70Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
DB0891 |
|
|
|
The relay card (PSAS400) provides volt free contact (VFS) relays that change state upon UPS events. This type of card is often used when current loop communications are required for devices such as building management systems (BMS), access control alarm panels or industrial PLCs. User selectable normally open (default) or normally closed contacts. |
 |
DC0891 |
|
|
|
The PSAS400 communication card provides contact closures for remote monitoring of your UPS. To meet different application requirements the PSAS400 card is capable of selecting the status of the dry-contact signal (active close or active open) by setting jumper. |
 |
D0874 |
|
- Automatic Voltage Regulation (Buck and Boost)
- Informative Screen Display
- USB Charging Port
- Light-weight compact and elegantly designed
- Intelligent microprocessor control
- Monitoring and shutdown software included
- Overload protection and alarm
- Output short circuit protection
- Start on battery function (cold start)
- USB communication
- Easy user-replaceable battery
- Australian/New Zealand approved sockets
- Wall mountable
|
|
The Powershield SafeGuard 1000VA Uninterruptible Power Supply (UPS) is designed for a home/office solution. |
 |
M8195C NEW
|
|
- Compact design with 24000mAh internal battery pack
- 2400A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
DA0891 NEW
|
|
- Stand-alone embedded system
- User configurable accessibility rights
- The built-in optimised IP Power communication protocol ensures real-time performance of data collection and can be used together with IP Power SE software to realise remote centralised monitoring.
- Supports WEB browser configuration management modes.
- Users can remotely control UPS shutdown, self-test, and restart.
- Supports standard UPS MIBs (RFC1628) and PPC MIBs.
- 10/100Mbps Ethernet network
- Support TLS/SSL protocol
- Automatically sends event and alert notifications via E-mail, SNMP Trap and IP Power messages
- With IP Power SE software installed, Network servers/workstations can be safely and smoothly shut down to avoid data loss and equipment damage caused by utility power failure.
- Support SSL/STARTTLS encrypted mailbox protocol (For example, Gmail, Outlook, etc.)
- 2 years warranty
|
|
PowerShield’s Simple Network Managment Protocol (SNMP) cards offer a choice of remote management options. Control and monitor one or multiple UPS systems and perform management tasks including scheduled shutdowns, startups, and reboots by simply installing the Lite, V4 or Cyber Secure SNMP Card. |
 |
N2089A NEW
|
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with MPPT solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
SG4571 |
|
- Physical Size
- Length: 258mm
- Width: 166mm
- Height (Total inc. tabs): 215mm
- Weight: 24.5kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 80Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 5mΩ
- Max. Discharge Current (5s): 900A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: NB (F14)/IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 24A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 80Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
D0924 |
|
- 0RU, 10 Outlet Power Distribution Unit (PDU)
- Unmanaged full metal rack-mount PDU
- Built-in 6KA C-Curve circuit breaker
- Rated Voltage: 230V~/60Hz
- 2M Power cord
- Vertical PDU incorporates three-way mounting brackets for ease of installation
|
COMING SOONThis item is arriving soon. |
10 Outlet Vertical Power Rail (10A IEC C20) with 6KA C-Curve Circuit Breaker. Integrated 2m power cord (10A IEC C20) 0RU. Colour Black. |
 |
S4574 |
|
- General
- Dimensions: 303L x 169W x 215H mm (including tabs)
- Weight: 27kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 90Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤6mΩ
- Max. Discharge Current: 1080A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 90Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4576 |
|
- General
- Dimensions: 330L x 173W x 220H mm (including tabs)
- Weight: 30.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 100Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): <5.5mΩ
- Max. Discharge Current: 950A (5s)
- Battery Life: 3-5 years standby
- Terminal Type: M8/F17
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 27A
- Charge Voltage: 14.4V to 15.0V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 100Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
D0882A |
|
- Line interactive smart AVR
- Three Australian outlets
- Full time power surge / spike protection
- USB communications with sophisticated PowerShield NetGuard software
- Modern, stylish steel enclosure
- Ultra reliable
|
|
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, |
 |
M8224 ROHS
|
|
- 3 to 15V @ 25A output
- Regulated variable output voltage or fixed 13.8V (selectable)
- Digital LED meters
- Overload & short circuit protected
- Extremely low ripple & noise
- Excellent regulation
- Highly efficient switchmode design
|
|
Boasting a massive 25A this power supply is ideal for testing 2 way radios, car stereos, high power RF transmitters, inverters and the like. The output voltage can either be fixed at 13.8V or fully variable from 3 - 15V via the front panel control. |
 |
D0930 |
|
|
|
Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! |
 |
M8200A |
|
- 0 to 30V @ 0 to 3A output
- Regulated variable output voltage
- Auxiliary fixed outputs of 5V & 12V @ 0.5A
- Variable current limiting
- Digital LCD meters
- Overload & short circuit protected
- Floating outputs
- Extremely low ripple & noise
- Linear toroidal design
- Excellent regulation
|
|
With an output of up to 30 volts at 3 amps, this compact bench power supply has been one of our most popular. Both output voltage and current are fully adjustable. In the case of an output short, the power supply goes into overload and shuts down. In addi |
 |
SG4577 |
|
- Physical Size
- Length: 300mm
- Width: 171mm
- Height (Total inc. tabs): 215mm
- Weight: 31kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 110Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): ≤5mΩ
- Max. Discharge Current (5s): 1000A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F8) /NB (F16)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 33A
- Charge Voltage: 14.4V to 14.8V
- Stand By:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 110Ah deep cycle battery is a compact battery for powering 12V equipment. Deep cycle sealed lead acid (SLA) batteries are designed for regular discharge. |
 |
D0942 |
|
- Surge and EMI/RFI filter protection
- 40kA Imax in L-N mode
- 60kA all modes
- 3 stage, 3 mode protection
- LC filter network
- Rugged IP24 enclosure
- 10A IEC C13/14 or 16A IEC C19/20
|
|
Provides secondary protection for critical equipment in locations prone to unreliable electrical supply, such as lightning prone regions. Ideally suited for use in conjunction with UPS systems or as secondary surge protection connected in line at the equipment location. Excess voltage transients are diverted to neutral and earth, limiting the damag |
|
M8205 |
|
- 0 to 30V @ 0 to 5A output
- Regulated variable output voltage
- Auxiliary fixed outputs of 5V & 12V @ 0.5A
- Variable current limiting
- Digital LCD meters
- Overload & short circuit protected
- Floating outputs
- Extremely low ripple & noise
- Linear toroidal design
- Excellent regulation
|
|
Including both variable output voltage and current this bench power supply is an ideal addition to any work bench. Voltage is fully variable from 0 - 30V on the main terminals, plus auxiliary outputs of fixed 12V and 5V at 0.5A are also provided. |
 |
M8187 |
|
- Nominal Input Power @ 240V AC: 500W
- Nominal Input Current: 2.2A
- Circuit Breaker Current: 3.0A
- Output Voltage: 120V
- Output Current: 4.2A
- Output Power: 250VA
- Dimensions: 158W x 100D x 120H mm
- Weight: 6.0Kg
|
|
M8187 500W, Converts 240V to 120V for powering US appliances on Australian mains. Fitted with US mains socket.
Secondary Rating: 120V 4.2A |
 |
D0918 |
|
|
|
The PowerShield Environmental Monitoring Device (PSEMD) is a PSSNMPV4 accessory suited for monitoring temperature and humidity. Email alerts and or system shutdown can be initiated if the user defined thresholds are exceeded. It offers two additional dry contact inputs for sensors such as smoke detectors and tamper switches. |
 |
D0883 |
|
- Line interactive smart AVR
- Three Australian outlets
- Full time power surge / spike protection
- USB communications with sophisticated PowerShield NetGuard software
- Modern, stylish steel enclosure
- Ultra reliable
|
|
Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, |
 |
M8310 |
|
- Up to 20A output
- 0-30V adjustable
- High efficiency switchmode design
- Over temperature, voltage and overload protection
- Low ripple & noise
- High RFI stability
|
|
A compact, efficient bench top power supply for use in servicing, repair and design of electronics. The low noise switchmode design offers excellent regulation for low current requirements. Offers the flexibility of both wide adjustable voltage and current range. Size: 336W x 87H x 214Dmm. Weight: 2.9kg. |
 |
D0884 |
|
- Offering the best protection in its class, protecting against damaging surges
- Modern, stylish LCD display indicates voltage in/out, amount of load and remaining capacity
- The AVR automatically bucks/boosts unstable fluctuating utility voltages, bringing them within 10% of nominal voltage range and thereby protecting valuable equipment
- Compact design at just 230mm deep
- Intelligent slot for SNMP communications card
- Battery is easily hot swappable and user replaceable
- Designed to run cool without fans
- After an extended power outage the UPS will turn back on and resume equipment functionality once power has returned
- Allows for orderly shutdown without software
- Free, downloadable NetGuard software provides complete power monitoring
- The plugged in UPS will continue to charge internal batteries whether the unit is on or off
- Comes standard with 6 Australian sockets and 2 IEC outlets. Of the 6 Australian outlets, 4 can be used with plug packs
- The UPS can turn on equipment when it is off, simply by connecting equipment and turning the UPS on
- Plug and play on any computer or NAS drive
|
|
This UPS 800VA Defender Rack Mount expands the successful Defender Range by building the popular features into a Rack Mount
UPS. At 230mm deep, this is the perfect UPS for shallow, wall mounted Comms cabinets.
This versatile UPS uses Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage, protecting
your valu |
 |
D0891 |
|
- Real-time dynamic graphs of UPS data (voltage, frequency, load level, battery level) .
- Warning notifications via audible alarm, broadcast, mobile messenger, e-mail and SNMP traps
- Historic data log stored in centralized PC database .
- Simple firmware upgrade with one click .
- Password security protection and remote access management.
- Supports optional environmental monitoring detector for temperature, humidity and smoke in external SNMP card.
- 2 year product warranty
|
|
The SNMP (Simple Network Management Protocol) card allows the UPS to be directly connected to the network without the need of a local computer. Furthermore, the SNMP card contains an integrated web server CPU allowing the user to view and control the UPS with any standard internet browser.
|
 |
D0919 |
|
- No downtime. Routine maintenance can be performed during normal hours by simply switching the MBS to the “Bypass” position. The load is then fed directly from mains power while maintenance is performed or the UPS is replaced all without interruption.
- PDU(power distribution unit).The MBS has six outlets for distribution to your load.
- Rack mount. It can be mounted both horizontally or vertically (0RU) into a rack.
- Wall mount as an option either vertically or horizontally to a wall.
- Suitable for both line interactive and true online double conversion topologies.
|
|
Power Shield are pleased to be able to offer a comprehensive range of MBS (Maintenance Bypass Switches) suitable for all UPS applications. An inclusion of a MBS is recommended for all critical power applications. |
