|
Description |
Downloads |
Specs |
Ordering |
|
 |
P8615B |
|
- Rated Current： 30A
- Rated Voltage： 1000V DC (TUV) / 600V DC（UL）
- Test Voltage: 6KV(50Hz,1min)
- Contact resistance of blug connectors: ≤0.5mΩ
- Safety Class： Class Ⅱ
- Protection Degree,mated： IP67
- Protection Dearee,Unmated IP2X
- Wire Size Range： 4-6mm2 (TUV) / 12AWG（UL）
- Flame Class： UL94-V0(TUV) /5VA（UL）
- Insulation Material： PC&PPO
- Temperature Range： -40°C...+85°C (TUV)/ -40°C...+90°C (UL)
- Certification： TUV & UL
|
|
Water & dust proof - IP67 Rated. This lead can be used for connections in photovoltaic solar panel arrays. The fully sealed design is suitable for use in exposed installations. |
|
P8618A |
|
- Rated Current： 30A
- Rated Voltage： 1000V DC (TUV) / 600V DC（UL）
- Test Voltage: 6KV(50Hz,1min)
- Contact resistance of blug connectors: ≤0.5mΩ
- Safety Class： Class Ⅱ
- Protection Degree,mated： IP67
- Protection Dearee,Unmated IP2X
- Wire Size Range： 4-6mm2 (TUV) / 12AWG（UL）
- Flame Class： UL94-V0(TUV) /5VA（UL）
- Insulation Material： PC&PPO
- Temperature Range： -40°C...+85°C (TUV)/ -40°C...+90°C (UL)
- Certification： TUV & UL
|
|
Water & dust proof - IP67 Rated. This lead can be used for connections in photovoltaic solar panel arrays. The fully sealed design is suitable for use in exposed installations. |
 |
P9306 |
|
|
|
Supplied pre terminated, overall length 1m. Bare ends. Ideal for use with outdoor LED strips, garden lighting etc. |
 |
PB8264 NEW
|
|
|
|
All feature 10A overload circuit breaker and 0.9m lead. Black. |
 |
PL8413 |
|
- Fitted with 90° IEC C13 connector and standard 90° Australian 3 pin mains plug with earthing pin.
- 2 metre length.
- 3 x 1mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
Energy authority approved. |
 |
PR8413 ROHS
|
|
- Fitted with 90° IEC C13 connector and standard 90° Australian 3 pin mains plug with earthing pin.
- 2 metre length.
- 3 x 1mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
Energy authority approved. |
 |
PW8404 |
|
- Fitted with IEC C7 connector and standard Australian 2 pin mains plug.
- 1.8 metre length.
- 2 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
White mains appliance power cable. 2.5A 2 Pin to Figure 8 plug 1.8m. Energy Authority approved. |
 |
PW8405C NEW
|
|
- Fitted with 3 pin mains connector.
- 2 metre length.
- 3 x 1mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
10A 3 pin 2m white, bare ends, 6.4mm diameter. Energy Authority approved. |
 |
PW8438 |
|
- Fitted with IEC C13 connector and standard Australian 3 pin mains plug with earthing pin.
- 2 metre length.
- 3 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
White mains appliance power cable. IEC Female to 3 Pin 2m. Energy authority approved |
 |
Q3203 |
|
- Input: DC 1.5V (1pc LR03 battery): 1-5 columns (POOR) ; 6-10 columns (FAIR) ;11-18 columns (GOOD)
- Battery tester for: 1.5V, 3V button cells and 1.5V, 3V, 9V Cylindrical cell( non-rechargeable lithium)
- Sizes for cylindrical cells include: AA/AAA/AA/C/D/N/CR-V3/2CR5/CRP2/9V/CR2/CR123A .
|
|
Allows quick voltage testing on consumer battery cells, including rechargeable cells. Suitable for use with AAA, AA, C, D, 9V, CR123A, CR2, CRV3, 2CR5, CR-P2. |
 |
S4482 |
|
- Cell Per Unit: 3
- Nominal Voltage (V): 6
- Nominal Capacity (Ah): 1.3Ah @ 20hour rate F.V (1.75/Cell)
- Weight: Approx. 0.33kg
- Internal Resistance (1KHz): 38mΩ
- Max Discharge Current (5s): 19.5A (5s)
- Battery Life: Stand by 3~5 years
- Terminal Type: F1
- Container Material: ABS
- Charge 0°C to 40°C
- Discharge -15°C to 50°C
- Storage -15°C to 40°C
- Max Charge Current: 0.39A
- Charge Voltage: 7.2V to 7.5V
- Stand By: Charge Voltage: 6.75 to 6.90V
- Physical Size (mm): 97L x 25W x 57H mm (including tabs)
- Weight: 0.32kg
|
|
This 6V 1.3Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
S4491 |
|
- Capacity
- 20 Hour Rate (5.25V): 4.5Ah
- 10 Hour Rate (5.25V): 4.2Ah
- 1 Hour Rate (4.8V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 25MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
- General
- Dimensions: 70L x 47W x 107H mm (including tabs)
- Weight: 0.75kg
|
|
This 6V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
S4501 |
|
- General
- Dimensions: 151L x 50W x 100H mm (including tabs)
- Weight: 1.75kg
- Capacity
- 20 Hour Rate (5.25V): 12Ah
- 10 Hour Rate (5.25V): 11Ah
- 1 Hour Rate (4.8V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 12MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 6V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
S4517 |
|
- General
- Dimensions: 97L x 43W x 58H mm (including tabs)
- Weight: 0.55kg
- Capacity
- 20 Hour Rate (5.25V): 1.3Ah
- 10 Hour Rate (5.25V): 1.1Ah
- 1 Hour Rate (4.8V): 0.78Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 95MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 0.36A
- Maximum Discharging Current: 18A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 1.3Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4528 |
|
- General
- Dimensions: 79L x 56W x 107H mm (including tabs)
- Weight: 1.1kg
- Charging
- 20 Hour Rate (10.5V): 2.9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 34MΩ
- Max Discharge Current: 43.5A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 0.87A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 2.9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4530 |
|
- General
- Dimensions: 134L x 67W x 66H mm (including tabs)
- Weight: 1.35kg
- Charging
- 20 Hour Rate (10.5V): 3.5Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 32MΩ
- Max Discharge Current: 54A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 1.08A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 3.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4532 |
|
- General
- Dimensions: 90L x 70W x 107H mm (including tabs)
- Weight: 1.45kg
- Capacity
- 20 Hour Rate (10.5V): 4.5Ah
- 10 hour Rate (10.5V): 4.2Ah
- 1 Hour Rate (9.60V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 45MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4538 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28MΩ
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life, maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4539 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28m Ohm
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 7Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4540 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.2kg
- Capacity
- 20 Hour Rate (10.5V): 7.2Ah
- 10 Hour Rate (10.5V): 6.7Ah
- 1 Hour Rate (9.6V): 4.67Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: <25mΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.16A
- Maximum Discharging Current: 108A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 7.2Ah sealed lead acid (SLA) battery is perhaps the most common size SLA battery in use. |
 |
S4542 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.6kg
- Capacity
- 20 Hour Rate (10.5V): 9Ah
- 10 Hour Rate (10.5V): 8.4Ah
- 1 Hour Rate (9.6V): 5.9Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.7A
- Maximum Discharging Current: 135A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 9Ah sealed lead acid (SLA) battery is one of the most common size SLA batteries in use. |
 |
S4543 |
|
- General
- 151L x 65W x 100H mm (including tabs)
- Weight: 2.65kg
- Charging
- 20 Hour Rate (10.5V): 9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 18MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.52A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4545 |
|
- General
- 151L x 65W x 119H mm (including tabs)
- Weight: 3.2kg
- Charging
- 20 Hour Rate (10.5V): 10Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 20MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.0A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 10Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4547 |
|
- General
- Dimensions: 151L x 98W x 101H mm (including tabs)
- Weight: 3.6kg
- Capacity
- 20 Hour Rate (10.5V): 12Ah
- 10 Hour Rate (10.5V): 11.2Ah
- 1 Hour Rate (9.6V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4548 |
|
- General
- Dimensions: 151L x 98W x 98H mm (including tabs)
- Weight: 3.7kg
- Charging
- 20 Hour Rate (10.5V): 12Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 15MΩ
- Max Discharge Current: 165A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.3A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life and maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
