|
Description |
Downloads |
Specs |
Ordering |
|
 |
P8431C |
|
- Fitted with IEC C7 connector and standard Australian 2 pin mains plug.
- Length: 0.75m
- 2 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
2 Pin to Figure 8 plug 5.0m. Energy Authority approved.
Ideal for installers when wall mounting televisions. |
 |
P8143 |
|
- Power supply: 250V a.c. 50Hz
- Rated Current: 10A
- Rated Output: 2500W
- Trip Leakage current: 30mA
- Trip time: <30mS
- Type of protection: IP40
|
|
A handy in-line connection residual current detection switch which measures for electrical leakage. |
 |
A0347 |
|
- Outlets work hidden behind equipment and cabinets!
- Outlet's channel is programmable (CH1-4)
- Multiple outlets can share the same channel to be controlled simultaneously
- Saves stand-by power
- Saves from your electricity bill
- Can be used in conjunction with a power board
- Built-in receiver memory stores data for up to 10 years
- Turn individual receivers on or off or a single button to turn all receivers on or off at the same time
|
|
Cut standby power usage around the home and office by switching appliances off at the wall via remote control. Easy inline connection between the GPO and your appliance |
 |
A0346 |
|
- Kit includes 1 RF remote + 1 outlets
- RF Remote control means line-of-sight is not necessary
- Outlets work hidden behind equipment and cabinets!
- Outlet's channel is programmable (CH1-4)
- Multiple outlets can share the same channel to be controlled simultaneously
- Saves stand-by power
- Saves from your electricity bill
- Can be used in conjunction with a power board
- Built-in receiver memory stores data for up to 10 years
- Turn individual receivers on or off or a single button to turn all receivers on or off at the same time
|
|
Cut standby 240V power usage around the home and office by switching appliances off at the wall via remote control. Easy inline connection between the GPO and your appliance |
 |
T5098
|
|
- Suits batteries up to 100Ah
- Dual 50A Anderson Plugs
- 12V Cigarette Socket
- 2 x 50A maxi blade fuses in circuit for extra protection.
- Lid with dual side clips for extra secure fit.
- Dual USB Ports with high current output (2 x 2.4A)
- Handy bar graph LED Voltmeter
- Circuit Breaker Switch
|
|
This 12V battery box features all the common connections that would typically be required for outdoor recreation power needs. |
 |
M8521A |
|
- Suitable for all 6V and 12V lead acid and gel batteries
- Suits battery recharging or maintenance (may be permanently connected).
- Protection against short circuit
- Ideal for battery storage or seldom used vehicles
- Light weight ‘plug in’ design
- Ring terminal or crocodile clip connection
|
|
This 6V/12V battery charger maintainer offers 600mA charging suitable for lead, gel cell and lead-acid batteries, including maintenance-free batteries. |
 |
S4565 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 14.6kg
- Charging
- 20 Hour Rate (10.5V): 50Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 9MΩ
- Max Discharge Current: 540A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: NB(F4)/IT(F8)
- Container Material: ABS
- Max Charge Current: 15A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 50Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4548 |
|
- General
- Dimensions: 151L x 98W x 98H mm (including tabs)
- Weight: 3.7kg
- Charging
- 20 Hour Rate (10.5V): 12Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 15MΩ
- Max Discharge Current: 165A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.3A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life and maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4545 |
|
- General
- 151L x 65W x 119H mm (including tabs)
- Weight: 3.2kg
- Charging
- 20 Hour Rate (10.5V): 10Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 20MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.0A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 10Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4543 |
|
- General
- 151L x 65W x 100H mm (including tabs)
- Weight: 2.65kg
- Charging
- 20 Hour Rate (10.5V): 9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 18MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.52A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4539 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28m Ohm
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 7Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4538 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28MΩ
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life, maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4530 |
|
- General
- Dimensions: 134L x 67W x 66H mm (including tabs)
- Weight: 1.35kg
- Charging
- 20 Hour Rate (10.5V): 3.5Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 32MΩ
- Max Discharge Current: 54A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 1.08A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 3.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8942A |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- MEPS approved.
|
|
Super-compact regulated power supplies. Supplied with 2.1mm DC jack. 100-240V AC input. Energy authority approved. MEPS approved. Requires P 8417 IEC lead. Dimensions: 167 x 65 x 40mm.
|
 |
P8440 |
|
- Fitted with IEC15 connector and 3 pin Australian mains plug.
- 1m metre length.
- 3 x 1mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
IEC15 Female to 3 Pin 1m. Energy authority approved. |
 |
S4482 |
|
- Cell Per Unit: 3
- Nominal Voltage (V): 6
- Nominal Capacity (Ah): 1.3Ah @ 20hour rate F.V (1.75/Cell)
- Weight: Approx. 0.33kg
- Internal Resistance (1KHz): 38mΩ
- Max Discharge Current (5s): 19.5A (5s)
- Battery Life: Stand by 3~5 years
- Terminal Type: F1
- Container Material: ABS
- Charge 0°C to 40°C
- Discharge -15°C to 50°C
- Storage -15°C to 40°C
- Max Charge Current: 0.39A
- Charge Voltage: 7.2V to 7.5V
- Stand By: Charge Voltage: 6.75 to 6.90V
- Physical Size (mm): 97L x 25W x 57H mm (including tabs)
- Weight: 0.32kg
|
|
This 6V 1.3Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
PW8438 |
|
- Fitted with IEC C13 connector and standard Australian 3 pin mains plug with earthing pin.
- 2 metre length.
- 3 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
White mains appliance power cable. IEC Female to 3 Pin 2m. Energy authority approved |
 |
PW8404 |
|
- Fitted with IEC C7 connector and standard Australian 2 pin mains plug.
- 1.8 metre length.
- 2 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
White mains appliance power cable. 2.5A 2 Pin to Figure 8 plug 1.8m. Energy Authority approved. |
 |
P6703 |
|
|
|
A black 1m lead with a 1.35mm DC plug to a USB type 'A' plug. |
 |
P8156 |
|
- High surge protection
- Recessed On/Off Switch
- Wide spaced socket to allow for plug packs
- $60,000 Connected Equipment Warranty – terms and conditions apply.
- 10A Circuit Breaker
- 1 x Type A USB Socket
- 1 x Type C USB Socket
- 8 x Surge-protected sockets supply complete, 3 line AC protection
- Impact and scratch resistant Polycarbonate case
- Heavy-duty 1.2-meter power cord
- Wall mountable
- LED indicator shows that your wiring is properly earthed and protection is active and available
|
|
This powerboard will protect your home and office electronics from dangerous surges and spikes and is ideal for charging mobiles, laptops and other small USB powered devices. |
 |
DA0924
|
|
- True double-conversion
- HID comms via USB
- Output power factor 0.9
- User-friendly and electronic easy-shift LCD display
- Rack or Tower design
- Advanced ECO mode for energy saving
- Generator compatible
- Programmable power management outlets
- Emergency Power Off function (EPO)
- Hot swappable battery design
- Ideal for medium density power protection
- Extra large charger
|
|
features true online double conversion and a Lithium-iron Phosphate advantage that includes extended battery life, lighter weight, faster recharge, higher performance and higher power density. |
 |
DA0922
|
|
- True double-conversion
- HID comms via USB
- Output power factor 0.9
- User-friendly and electronic easy-shift LCD display
- Rack or Tower design
- Advanced ECO mode for energy saving
- Generator compatible
- Programmable power management outlets
- Emergency Power Off function (EPO)
- Hot swappable battery design
- Ideal for medium density power protection
- Extra large charger
|
|
features true online double conversion and a Lithium-iron Phosphate advantage that includes extended battery life, lighter weight, faster recharge, higher performance and higher power density. |
 |
DA0920
|
|
- True double-conversion
- HID comms via USB
- Output power factor 0.9
- User-friendly and electronic easy-shift LCD display
- Rack or Tower design
- Advanced ECO mode for energy saving
- Generator compatible
- Programmable power management outlets
- Emergency Power Off function (EPO)
- Hot swappable battery design
- Ideal for medium density power protection
- Extra large charger
|
|
features true online double conversion and a Lithium-iron Phosphate advantage that includes extended battery life, lighter weight, faster recharge, higher performance and higher power density. |
 |
N2097 |
|
- Suitable for any 12VDC system up to 8A direct current loads like motors, lamps, heaters & LEDs (with current limiting resistors).
- Electric motor can start smoothly at low speed with this PWM controller.
- Replaces the resistor circuit for control of the speed of DC motors
- Frequently used as light dimmer.
- Energy efficient with zero to full speed control
- Light dimmer capable of smooth control
- The whole PCBA is potted in epoxy and with the special splash proof tuning potentiometer making this controller weather proof.
|
|
This 12VDC 8A pulse width modulator (PWM) is a general purpose DC output power control. |
 |
D0511B
|
|
- Ultra high capacity power bank with Power Delivery and Quick Charge™ function.
- Charge latest tablets, smartphones, portable game consoles and more.
- USB-C Power Delivery will deliver power delivery support at 18W to compatible devices.
- Dual Quick Charge™ 3.0 outputs will charge compatible smartphones and tablets 4 times faster.
- High speed Micro USB (QC2.0) and USB-C (Power Delivery) inputs for recharging.
|
|
Offering both the latest QuickCharge 3.0 charging and 18W USB-C PD output, this enormous 20,000mAh power bank will keep your devices charged away from mains power. 136x70x25mm |
