|
Description |
Downloads |
Specs |
Ordering |
|
 |
Z6490 NEW
|
|
|
|
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers. |
 |
Z6491 NEW
|
|
- Wide Current Range: Supports motor loads ranging from 5A to 22A, ensuring flexibility for various DC motor applications.
- PWM Technology: Utilizes Pulse Width Modulation to efficiently regulate motor speed while minimizing energy loss and heat generation.
- MOSFET Control: Integrated high-efficiency MOSFETs for stable, reliable, and high-current output performance.
- Compact Design: Designed for easy integration into small projects and enclosures.
- Opto-isolated input.
|
|
The PWM MOSFET Motor Speed Controller is a high-performance module designed to provide precise control of DC motor speed using Pulse Width Modulation (PWM) technology. |
 |
Z6492 NEW
|
|
- Model: STM32F103C8T6
- Core: ARM 32-bit Cortex-M3 CPU
- Operating Frequency: Up to 72 MHz
- Flash Memory: 64KB
- SRAM: 20KB
- Operating Voltage: 2.0V to 3.6V
- I/O Logic Voltage: 2.0V to 3.6V
- Reset Functionality: Supports Power-On Reset (POR) and Power-Down Reset (PDR)
- Crystal Oscillator: 4-16 MHz for precise clocking
- On-board Mini USB port for both power supply and USB communication
- Colour: Black
- Material: Metal
- Dimensions: 53 x 22mm
|
|
The STM32F103C8T6 ARM STM32 SWD Development Board is an ideal platform for learners and developers looking to explore and master the STM32 microcontroller based on the ARM Cortex-M3 32-bit core. |
 |
Z6493 NEW
|
|
- The PCA9685 offers 16 fully programmable PWM outputs with a 12-bit resolution, providing 4096 steps for precise duty cycle adjustments on each channel.
- The module uses the I2C bus for communication, ensuring easy integration with microcontrollers like Arduino or Raspberry Pi.
- Supports frequency control across all 16 channels, programmable between 24Hz and 1526Hz.
- The duty cycle (pulse width) can be fine-tuned from 0% to 100% for accurate output control.
- The on-board PWM controller manages all 16 channels independently, reducing processing load on the microcontroller compared to direct pin-based servo control.
- Multiple modules can be daisy-chained together. With up to 62 boards on a single I2C bus, you can control up to 992 servos using just two pins.
|
|
This 16 Channel PWM Servo Control Board is a versatile module that allows you to control up to 16 servos using only 2 pins via I2C communication. |
 |
Z6494 NEW
|
|
- Delivers up to 60W output with a 2-ohm load under a 24V power supply.
- Output power decreases proportionally for 4-ohm or 6-ohm loads.
- Supports a DC input range of 10-24V, ensuring flexibility for various power supply configurations.
- Designed in PBTL mode, enabling support for low resistance and high-power output
|
|
The TPA3118 60W Mono Digital Audio Power Amplifier Board is a high-performance audio amplifier designed for applications requiring compact size, low resistance, and high power output. |
 |
Z6495 NEW
|
|
- Non-contact detection, moving object detecting.
- This module's transmitting frequency is 24GHZ, can be widely applied in business, industries, word controlling etc.
- Provide various frequency range standards: -UK,-F.
- Advanced low consumption PHEMT oscillator.
- Independent transmitting and receiving route, can get the big gain.
- High sensibility, high flexibility, low cost, operating distance is 15m.
- Single channel operation
|
|
The CDM324 is a 24GHz Millimeter Wave Radar Sensor Module designed for reliable non-contact motion detectionand moving object detection. |
 |
Z6496 NEW
|
|
- Simple step and direction control interface
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated
|
|
This breakout board is for A4988 DMOS Microstepping Driver with translator and overcurrent protection. |
 |
Z6497 NEW
|
|
- Integrated temperature and humidity sensing for precise control
- Wide temperature range from -20℃ to 60℃
- Full humidity control with a range of 0% to 100%
- High control accuracy of 0.1℃
- Relay output with a maximum capacity of 10A
- Compact and durable design with dimensions of 65*55*28mm
|
|
The XH-M452 Dual Output Temperature & Humidity Control Board is a versatile device designed for precision climate control applications. |
 |
Z6498 NEW
|
|
- Board material: international standard sheet, all tin pad, high strength fire drop material, disassembly, can be repeated.
- PCB board design features commonly used SMD components.
- The left and right of the three components are used to practice welding, each column with a test point.
- The middle of the circular circuit has been designed for the water lamp circuit, by the CD4017, NE555, light-emitting diodes, welding power can work.
- The circuit is also used on the back, a ruler to facilitate the measurement of components.There are examples of PCB conductors to facilitate the use of PCB design.
|
|
This Soldering SMD Practice Board Kit contains all the components needed for users to learn and improve their soldering abilities. |
 |
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
 |
Z6527A NEW
|
|
- Support Arduino Mega2560 Directly inserted
- With Full-angle IPS TFT panel
- On Board level conversion chip for 5V/3.3V MCU
- Compatible with 2.8~3.3V operation voltage level
- Compatible with Arduino-Series development Board.
- Provided 12-examples with Arduino ,3-examples with STM32
- With SD Card Socket
- With SPI FLASH circuit
|
|
A 480x320 display shield for the Arduino Mega utilising the ILI9486 chipset. Ideal for projects requiring sensor monitoring. |
 |
Z6563 NEW
|
|
- Built-in 3.3V Voltage Regulator
- Labeled breakout pins
- Dedicated socket for nRF24 board.
- Suits the 8-pin NRF24L01 and NRF24L01 + PA + LNA modules
- Power status LED
|
|
This module is a compact circuit board designed to simplify the integration of the NRF24L01+ or NRF24L01+PA+LNA wireless transceiver module with other electronic boards and project designs. |
 |
Z6564 NEW
|
|
- Operating frequency: 2400MHz ~ 2524MHz
- Modulation: GMSK
- Receiver sensitivity: -95dbm
- Operating voltage: 2.7V ~ 3.6V
- Max current consumption when transmitting data: 115mA
- Max current consumption when receiving data: 45mA
- Gain of PA: 20 dB
- Gain of LNA: 10 dB
- Supply Voltage: Standard
- Dissipation Module: Standard
- Operating Temperature: -40 to 85°C
|
|
Operating in the 2.4GHz frequency band, the nRF24L01+PA+LNA is a wireless transceiver module designed for long-range communication while maintaining low power consumption. |
 |
Z6565 NEW
|
|
|
|
Unlock the potential of IoT and wireless communication with this versatile electronics kit! Designed for makers, hobbyists, and engineers, this kit includes an ESP32-WROOM-32D module, an nRF24L01+ wireless module with an antenna, a 0.96" OLED display, and essential accessories for seamless connectivity. |
 |
ZA6319 NEW
|
|
- Large 3-digit display of measured temperature
- Operates in both a heating and cooling mode of operation
- Programmable settings for temp set point, temp hysteresis, compressor delay and temperature calibration.
- Waterproof NTC temperature sensor has -50 to +99.9°C measurement range with ±1°C accuracy
- Over temperature and sensor failure audible and visual alarm
- Unit temperature reading can be calibrated
- Relays switch up to 120/240VAC @ 10A or 15VDC @ 10A
- 24VDC module operation
|
|
The STC-1000 temperature controller is a self contained heating / cooling controller that operates on 24VDC and controls either AC or DC loads up to 10A max current. |
 |
ZA6421 NEW
|
|
- Ultra compact form factor
- Dual core ARM Cortex M0+ processor
- Two SPI controllers
- Two I2C controllers
- 16 PWM channels
- 26 multifunction GPIO pins
- Three analogue inputs
- On board USB controller
- In-built temperature sensor
- Castellated module allows soldering direct to carrier boards
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- Accurate on-chip clock
- Accelerated integer and floating-point libraries on-chip
|
|
Raspberry Pi Pico is a tiny, fast, and versatile board built using RP2350, a brand new microcontroller chip designed by Raspberry Pi in the UK. From controlling appliances to operating a light display, Raspberry Pi Pico puts the technology that underpins countless everyday operations into your hands. |
 |
ZW6240A NEW
|
|
- Form factor compatible with earlier series of Arduino boards for compatibility with existing shields and projects.
- Expanded memory and faster clock speed
- Extra on-board peripherals including 12-bit DAC, CAN BUS and OP Amp.
- Wider input voltage range for integration with motors, LED strips and actuators.
- HID support for keystrokes and mouse movement.
- Wi-FI and Bluetooth connectivity on board.
- Qwiic connector for I2C compatible sensors and actuators.
- LED matrix on board.
- Supports battery powered RTC.
|
|
The Funduino UNO R4 with WiFi is an Arduino compatible board integrating the powerful RA4M1 microcontroller with the robust wireless capabilities of the ESP32-S3 from Espressif. Additionally, it features an on-board 12x8 LED matrix, a Qwiic connector, a VRTC, and an OFF pin, making it an ideal choice for all your maker projects. |