|
Description |
Downloads |
Specs |
Ordering |
|
![D4211 TL-SG105PE 5 Port Gigabit PoE Switch](https://images.altronics.com.au/thb/d/D4211.jpg) |
D4211 NEW
|
|
- Five 10/100/1000Mbps RJ45 ports
- Equipped with four 802.3af/at PoE+ ports with up to 30W for each port, data, and power can be transferred on one single cable
- Supports PoE power up to 65 W for all PoE ports*
- Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and Easy Smart Configuration Utility simplify configuration
- Fanless design lowers energy consumption and eliminates operating noise
|
|
Professional 5-Port Gigabit Easy Smart Switch with 4-Port PoE+
Easy to Use, Multi-Purpose PoE Switch with Powerful Performance |
![C2190A 200mm (8](https://images.altronics.com.au/thb/c/C2190A.jpg) |
C2190A NEW
|
|
- Redback® “Fast-Fix” speaker utilise a time saving flip lock mounting method. It results in a finish with no visible screw heads or caps. The flip lock tabs slide outwards as the speaker is screwed into the hole, securing the speaker to the ceiling material from the top side. Suitable for use with any 8-33mm ceiling tile, including gyprock, mineral fibre or fixed gyprock ceilings. We recommend using our T 2314A holesaw to cut the speaker hole.
|
|
The C 2190A is a high power 30W PA speaker designed for BGM, paging & emergency warning applications. The offset transformer mounting allows mounting in ceilings with limited recess space. |
![Z6516A 7](https://images.altronics.com.au/thb/z/Z6516A.jpg) |
Z6516A NEW
|
|
- 7’’ standard display, 1024x600 resolution
- Capacitive touch screen, maximum support 5 point touch
- Supports backlight control, the backlight can be turned off to save power
- Supports standard HDMI interface input.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as the sub-display (resolution of the output has to be able to adjust to 800X480)
- Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, win10 IOT, single-touch, free drive etc.
- Works as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch), free drive.
|
|
A 1024x600 touchscreen for Raspberry Pi that supports standard HDMI interface input which can be directly connected to Raspberry Pi. |
![A3105 8K 48Gbps 4 Way HDMI Switcher](https://images.altronics.com.au/thb/a/A3105.jpg) |
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |
![S2694 Power Hub and Battery Isolator Switch](https://images.altronics.com.au/thb/s/S2694.jpg) |
S2694 NEW
|
|
- Pre-wired for simple installation
- Includes 100A battery isolator switch
- SB50 Anderson Style input and output
- Dual car accessory sockets
- 60W USB C PD charger
- 4 x 2.4A USB A charging ports
- Weather resistant caps on all connections
- Internal fuse block
|
|
Designed to manage power distribution in your 12V or 24V vehicle. Measuring just 160x160x80mm, this box is packed with connections. |
![K8670 Makerzoid Superbot Set](https://images.altronics.com.au/thb/k/K8670.jpg) |
K8670 NEW
|
|
- Over 26 robots can be assembled as well as custom projects
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- Superbot brings you endless fun in building, playing then battling with their car models together which makes it the new pop in any kids' theme party.
- The set is packed in a clear storage box to help children develop a good habit of packing and collecting their own toys.
|
|
A 400pc set allowing kids to build up to 26 different projects, and create designs of their own. Includes control unit and intelligent sensors (2) that allow building of line tracking, obstacle avoiding and following robot designs. Blocks are compatible with other major brands. Fully programmable using Scratch. Includes storage box. |
![Q0596 Flush Mount 350A Coulometer With Shunt](https://images.altronics.com.au/thb/q/Q0596.jpg) |
Q0596 NEW
|
|
- Easy to read bright display.
- Display backlighting
- Battery capacity meter.
- Ideal for measuring run time for auxiliary batteries, portable and mobile equipment.
- Includes 350A shunt with sampling circuit.
- Configurable battery capacity.
- Adjustable "Full" and "Zero" voltages.
|
|
A compact backlit battery "fuel gauge" with high precision current measurement. |
![Z6302J Raspberry Pi 5 Single Board Computer 4GB](https://images.altronics.com.au/thb/z/Z6302J.jpg) |
Z6302J NEW
|
|
- Broadcom BCM2712 quad-core Arm Cortex A76 processor @ 2.4GHz
- RAM variants up to 8GB
- Interchangeable Camera and DSI display connectors
- Dual 4Kp60
- Real-time clock
- Power button
- UART debug port
|
|
The Raspberry Pi 5 4GB single board computer. The bandwidth speed and performance of the new Raspberry Pi 5 is a step up from earlier models. |
![L2012A TV Antenna Hills® Tru-Band UHF/VHF](https://images.altronics.com.au/thb/l/L2012A.jpg) |
L2012A NEW
|
|
- Designed for prime capital cities for VHF and UHF channels 6-12 and 28-38
- Boomlock technology used to secure elements to balun
- New mounting clamp for quicker and safer installation
- Matched diplexer-balun rejects out-of-band interference for minimal picture break-up
- Ultrasonically sealed balun prevents water ingress for maximum reliability
- Strong mechanical construction with a lightweight and compact design
|
|
The Tru-Band antenna range is a revolutionary new combination antenna for capital cities that have been designed for the digital-only TV environment in Australia. |
![A3608 Wireless Extender For USB C Devices](https://images.altronics.com.au/thb/a/A3608.jpg) |
A3608 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts from a USB type C device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
HDMI wireless sender capable of sending 1080p 60Hz signals from your device to a TV or monitor in another room up to 50m away (line-of-sight). |
![A3607 Wireless HDMI Extender](https://images.altronics.com.au/thb/a/A3607.jpg) |
A3607 NEW
|
|
- 1080p @ 60Hz wireless video and audio
- Casts a HDMI source device to a monitor or television up to 50m away
- Operates on 5GHz 802.11ac band
- HDMI 1.4 compliant
- HDCP compliant
- Fully automatic pairing for near instant signal connection
- No drivers, software, manual casting or set up needed.
|
|
These wireless extension cables provide a simple way to send 1080p 60Hz signals from a HDMI source device to TV or monitor in another room up to 50m away (line-of-sight). |
![RT4808A 47uF 63V High Temp. PCB Electrolytic Capacitor 2K Rl](https://images.altronics.com.au/thb/r/R4710.jpg) |
RT4808A NEW
ROHS
|
|
|
|
High temperature rating (105°C ) for constant, reliable operation.
2K reel and tape pack.
Note: Sleeve colour may be black or green. |
![R9572B 220uF 35V SMD Electrolytic Capacitor Reel 500](https://images.altronics.com.au/thb/r/R9412.jpg) |
R9572B NEW
|
|
|
|
Please note different part numbers for OEM reels. Please contact us for OEM reel pricing. |
![Q1300 Wireless Tyre Pressure Sensor Monitor System](https://images.altronics.com.au/thb/q/Q1300.jpg) |
Q1300 NEW
|
|
- Adjustable alarms for high/low pressure, temperature
- Leak detection
- Temperature monitoring
- Solar powered dash display
- Sticky dash mount allows for mounting anywhere
- Includes 4 matched sensors, USB cable, valve stem nuts and fitment wrench
|
|
This wireless monitoring system displays tyre pressure and temperature for your vehicle or trailer. The wireless sensors screw onto the valve stems of your tyres and transmit back to the solar powered dash monitor. |
![D4370A Archer AX1500 Wi-Fi 6 Wireless Router](https://images.altronics.com.au/thb/d/D4370A.jpg) |
D4370A NEW
|
|
- Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity and reduced network congestion.
- Next-Gen 1.5 Gbps Speeds
- Communicates more data to more devices using revolutionary OFDMA and MU-MIMO technology while simultaneously reducing lag.
- Triple-Core Processing ensures communications between your router and all connected devices are smooth and buffer-free.
- Achieve the strongest, most reliable WiFi coverage with Archer AX1500 as it focuses signal strength to your devices using Beamforming technology and four antennas.
- Increased Battery Life
- Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App.
- Backward Compatible: Archer AX1500 supports all previous 802.11 standards and all WiFi devices.
|
|
This Archer AX1500 Wi-Fi 6 Router you can Wi-Fi 6 efficiently transmits data, enabling data packets for different applications to share one broadcast and cut the latency. |
![N0080G 80W 12V Monocrystalline Solar Panel](https://images.altronics.com.au/thb/n/N0080G.jpg) |
N0080G NEW
|
|
- Excellent performance under low light conditions, creating better kWh/kW ratio and produces an average of 2-3% more electricity.
- Anti reflective and self cleaning glass surface reduces power loss due to dirt and dust.
- Junction box and bypass diodes make sure the modules do not overheat or create a "hot spot" effect.
|
|
This quality 80W 12V monocrystalline solar panel module is designed for direct connection to a solar charge controller for use in remote power systems. |
![D5516A Surveillance Hard Drive WD Purple SATA 3.5inch 2TB](https://images.altronics.com.au/thb/d/D5514.jpg) |
D5516A NEW
|
|
- Form Factor: 3.5"
- Cache: 256MB
- Capacity: 2TB
- Interface:SATA
- Product Description: WD Purple WD22PURZ - hard drive - 2 TB - SATA 6Gb/s
- Type: Hard drive - internal
- Data Transfer Rate: 600 MBps
- Buffer Size: 256 MB
- Features: Advanced Format technology, AllFrame, Conventional magnetic recording (CMR), support up to 64 cameras
- Dimensions (WxDxH): 101.6 mm x 147 mm x 26.1 mm
- Weight: 450 g
- Manufacturer Warranty: 3-year warranty
- Drive Transfer Rate: 600 MBps (external)
- Internal Data Rate: 175 MBps
- MTBF: 1,000,000 hours
- Non-Recoverable Errors: 1 per 10^14
- Load / Unload Cycles: 300,000
- Interfaces: 1 x SATA 6 Gb/s
- Compatible Bay: 3.5"
- Power Consumption: 3.8 Watt (read/write), 3.2 Watt (idle), 0.3 Watt (standby), 0.3 Watt (sleep)
- Compliant Standards: RoHS 2011/65/EU
- Min Operating Temperature: 0 °C
- Max Operating Temperature: 65 °C
- Min Storage Temperature: -40 °C
- Max Storage Temperature: 70 °C
- Shock Tolerance (operating): 30 g @ 2 ms
- Shock Tolerance (non-operating): 250 g @ 2 ms
|
|
Latest generation Western Digital 'WD purple' range of hard drives are optimised for the harsh demands of a modern HD multi-camera surveillance system where they will be running 24 hours a day 7 days a week. Model: WD22PURZ.
|
![SG4560A 12V 33Ah Deep Cycle UGEL Type (SLA) Battery M6/F8](https://images.altronics.com.au/thb/s/SG4560A.jpg) |
SG4560A NEW
|
|
- Physical Size
- Length: 197mm
- Width: 130mm
- Height (Total inc. tabs): 163mm
- Weight: 10.3kg
- Other
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 33Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 12mΩ
- Max. Discharge Current (5s): 330A (5s)
- Battery Life: 10-12 years standby
- Terminal Type: IT (F8)
- Container Material: ABS Option: 94-HB & 94V-0 flame retardant case)
|
|
These are suitable for every day use in golf buggies, wheelchairs, forklifts and remote power applications. |
![H8232B 100mm Dual VESA Desk Mount LCD Bracket with USB](https://images.altronics.com.au/thb/h/H8232B.jpg) |
H8232B NEW
|
|
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 17"-32" weighing up to 6kg. Includes 2 USB ports. |
![D0521 100W USB C Power Delivery Laptop Battery Bank](https://images.altronics.com.au/thb/d/D0521.jpg) |
D0521 NEW
|
|
- High 100W output for high capacity devices such as laptops
- 30,000mAh capacity
- 111Wh capacity - NOT SUITABLE FOR AIR TRAVEL.
- USB type A and type C outputs on front panel
- Study aluminium casing.
- Torch with 3 modes on back panel
|
|
This 30,000mAh battery bank offers high output Power Delivery (PD) allowing users the ablity to charge a range of devices. It features an aluminium casing with power capacity LCD readout. Dual USB type A outputs as well as dual USB C PD outputs. |
![M8196 83Wh USB Portable DC Power Generator & Camp Light](https://images.altronics.com.au/thb/m/M8196.jpg) |
M8196 NEW
|
|
- 83Wh internal lithium-ion battery (22.5Ah @ 3.7V)
- Light weight yet sturdy design with carry handle
- Micro USB recharge port
- USB C PD 18W output
- Dual QC3.0 18W USB A outputs
- 5W max hand crank recharging
- Torch with SOS mode
- Three brightness lantern/reading lamp
- Recharge time 4.5hrs (QC3.0).
- Battery capacity readout
|
|
Great for camping and hiking getaways, this compact portable charging solution keeps your devices powered up while also providing a handy lamp and torch. |
![T1533B Crimptool Heavy Duty Lugs 6mm2 to 120mm2](https://images.altronics.com.au/thb/t/T1533B.jpg) |
T1533B NEW
|
|
- Crimps copper lug and non-insulated terminals
- Crimps Anderson plug terminals
- Designed with long handles for added leverage on thick walled terminals
- Rotating jaws for changing between crimp sizes
- Chrome plated finish prevents corrosion and protects against wear and tear
- Produces professional quality crimp work
|
|
Rugged cast steel crimper designed for uninsulated cable lugs and Anderson plugs. |
![A3110 HDMI USB KVM Over IP Extender - Encoder](https://images.altronics.com.au/thb/a/A3110.jpg) |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
![A3111 HDMI USB KVM Over IP Extender - Decoder](https://images.altronics.com.au/thb/a/A3111.jpg) |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
![D3012 Power Over Ethernet (PoE) Tester & Cable Tracer](https://images.altronics.com.au/thb/d/D3012.jpg) |
D3012 NEW
|
|
- Continuity test for short circuit and open condition - shows pin configuration
- Cable length measurement up to 200m (±1.6m)
- Digital, analog and PoE testing modes
- 802.3af/at PoE port testing with pin detection
- Port flash and switch detail display
- Easy to read backlit graphical screen
- Non-contact AC voltage detection on receiver probe
|
|
A complete PoE cabling tester with cable tracer receiver, cable length testing,
|
![X0585 ANU410 6dBi 1.6m UHF CB Antenna](https://images.altronics.com.au/thb/x/X0585.jpg) |
X0585 NEW
|
|
- Mounting base complete with spring
- Fibreglass extension pole (full antenna height 1.6m)
- 4.5m coaxial cable, a pre-terminated FME connector and PL259 adaptor
|
|
The ANU410 is a 6dBi UHF CB Antenna with a detachable fiberglass pole. At 1.6m height and 6dbi gain, this antenna is ideal for those looking for effective communication in Australia’s relatively flat outback. |
![A3615 Mini LED Projector With Wi-Fi Mirroring](https://images.altronics.com.au/thb/a/A3615.jpg) |
A3615 NEW
|
|
- Project screens up to 4m wide
- Compact lightweight design
- 800 x 480p output resolution
- 1080p input resolution
- Internal speaker
- 3.5mm jack audio out
- USB media playback
- HDMI input
- Screen mirroring from PC, Mac, iOS and Android devices
- Adjustable focusing
- Threaded insert in base for tripod mounting
- Power from mains power supply or battery bank (via micro USB).
|
|
This compact projector offers excellent LED picture quality with 800x480p resolution for screens up to 4m (170”) wide! |
![H4117A 21mm Adhesive Cable Tie Mounts Pk 1000](https://images.altronics.com.au/thb/h/H4115A.jpg) |
H4117A NEW
|
|
|
|
Constructed of nylon 66, 94V-2 and backed with high quality self-adhesive tape. Super strength. 21mm x 21mm |
![S9128C Vandal Resistant Vari-Focal IP66 Colour Dome Camera](https://images.altronics.com.au/thb/s/S9833B.jpg) |
S9128C NEW
|
|
- Video Output Mode: AHD/TVI/CVI: 8M@15fps;
- 1/2.8"SONY Starvis Back-illuminated CMOS sensor;
- minimum Illumination:0.01Lux,
- Infrared Distance:25m;
- 2.7-13.5mm lens;
- Support OSD Menu;
- Support WDR;
- Housing: Metal, IP67
|
|
This Vandal Resistant Vari-Focal IP66 Colour Dome Camera has been specifically designed for installation in applications where damage resistance is paramount eg bus or train stations, concourses, carparks etc. |
![R9438B 10uF 16V SMD Electrolytic Capacitor Reel 2K](https://images.altronics.com.au/thb/r/R9412.jpg) |
R9438B NEW
|
|
|
|
Please note different part numbers for OEM reels. Please contact us for OEM reel pricing. |
![A3081F 18Gbps 4 Way HDMI Switcher](https://images.altronics.com.au/thb/a/A3081F.jpg) |
A3081F NEW
|
|
|
|
The 4 port HDMl 4K switch lets you share a display with four HDMl™-enabled A/V devices. |
![S9810A 5.0 Megapixel Full Colour Dome IP Camera](https://images.altronics.com.au/thb/s/S9810A.jpg) |
S9810A NEW
|
|
- H.264, H.265+, JPEG, AVI compression
- 5 megapixel @ 30fps
- Offers night time colour video
- Ideal for domestic installations
- In-built LED security light
- Motion detect flashing mode
- Up to 30m night time illumination
- Metal housing
- 2.8mm lens
- Simultaneous multiple streams
- Supports ONVIF
- SD card slot
- PoE receiver
|
|
A new series of camera designed to provide full colour video day and night. The camera has a security light in-built which allows the high sensitivity sensor to reproduce colour night time imaging compared with traditional day/night cameras which only display B&W when IR is activated. Light can also flash upon detection to deter intruders. |
![M8536B 6/12V 10A / 14.4V 9A Automotive Battery Charger](https://images.altronics.com.au/thb/m/M8536B.jpg) |
M8536B NEW
|
|
- Short circuit and reverse polarity protected
- Suitable for use with lead acid, LiFePO4, AGM/EFB batteries.
- Overheating protection
- Includes car accessory socket lead, battery clamps and ring terminal lead
- Suits 6V and 12V cells
- Defective cell detection
- Trickle charge function
- 12V DC 10A power supply mode
- IP65 rated
|
|
This compact charger is suitable for all lead acid type and Lithium (LiFePO4) type batteries. It will charge 6V/12V cells using a 6-stage charging circuit. |
![K8672 Makerzoid Robot Master Standard 100 in 1 Set](https://images.altronics.com.au/thb/k/K8672.jpg) |
K8672 NEW
|
|
- Build more than 100 robots from simple to complex, which contains a lot of robot knowledge such as machinery, gears, structure, transmission, etc.
- Both Children and parents will enjoy the fun of building a robot and making a programming for it.
- Helps develop children's mind, DIY and logical thinking ability.
- Set is equipped with 23 robotics courses for kids to learn how to build, control and code at home while playing with this toy set.
- Incorporates 2 integrated motors and 2 IR sensors (batteries NOT included) to allow for intelligent, smooth moving robotic projects
- Allows kids to explore grow their imaginations by building and creating projects by themselves
- With the Makerzoid App from App Store and Google Play, kids can assemble the robots easily through the graphic instructions and control the motorized robot to move in all directions with the robotics kit.
- Available through the free app, Scratch 3.0 reduces the difficulty of coding - just to drop a few orders into the "Coding" section then the robot can react on your demand.
- The set is packed in a big storage box to help children develop a good habit of packing and collecting their own toys. And the sorting plate will be less time-consuming because kids could organise the building blocks based on the colour and size.
|
|
The Robot Master sets supports the building of up to 200 different robotic projects from simple to complex, allowing kids to progress their STEM skills up with staged lessons. |
![X0587 ANU850 3dBi 60cm UHF CB Antenna](https://images.altronics.com.au/thb/x/X0587.jpg) |
X0587 NEW
|
|
- Heavy duty barrel spring base
- Fibreglass radome
- Length of antenna is 660mm
- Low-loss coaxial cable (4.5m)
- Pre-terminated FME connector and PL259 adaptor
|
|
The ANU850 is a 3dBi UHF CB Antenna with fibreglass pole and heavy duty barrel spring base. |
![S5377A HID (RFID) Vandal Resistant Control Keypad with Card Reader](https://images.altronics.com.au/thb/s/S5377A.jpg) |
S5377A NEW
|
|
- Weather resistant design (IP65)
- Vandal resistant
- Compatible with 125KHz 64-bit EM cards & key fobs
- Built-in logics for stand alone, split-decoded and multi-station operations
- Controls “Going In” with user codes/cards
- “Going Out” with feature programmable egress button
- Door Bell for guests/service persons /tradesmen
- Stainless steel faceplate combines with die-casting metal back-lit key buttons
- Die-Cast Zinc Alloy Protection Bracket for Surface Mount
|
|
This weatherproof vandal resistant door keypad controller is designed for controlling a door strike in home or business security installations. It combines a digital keypad and proximity EM card reader in one unit. |
![H1983B Red 2.8mm Female Spade Crimp Pk 1000](https://images.altronics.com.au/thb/h/H1981B.jpg) |
H1983B NEW
|
|
- Wire: 0.75 - 1.0mmØ
- Stud: 2.8mm
- Max. voltage: 300V
|
|
Spade type with double crimp. Pack of 1000.
|
![H1848B Red 2.8mm Male Spade Crimp Pk 1000](https://images.altronics.com.au/thb/h/H1847B.jpg) |
H1848B NEW
|
|
- Wire: 0.75 - 1.0mmØ
- Stud: 2.8mm
- Max. voltage: 300V
|
|
Spade type with double crimp. Pack of 1000.
|
![S9845B Low Power Solar Outdoor Wi-Fi Tuya Smart Camera](https://images.altronics.com.au/thb/s/S9845B.jpg) |
S9845B NEW
|
|
- 4 x 18650 replaceable batteries with 5W solar panel recharging
- Includes wall mount bracket
- LED floodlight on motion detect (selectable)
- Two way audio (mic & speaker in-built)
- 3.6mm (120°) lens with digital zoom
- Day/night mode with IR LEDs
- 1080p recording
- Motion detect with push notifications to iOS/Android
- SD card slot (up to 64GB)
- Compatible with 2.4GHz Wi-Fi
|
|
This 1080p wireless 2MP camera is ideal for use in situations where cabling for power and video are impractical. It provides superb clarity for both day and night use and can be configured to automatically record when motion is detected. |
![Z6302K Raspberry Pi 5 Single Board Computer 8GB](https://images.altronics.com.au/thb/z/Z6302J.jpg) |
Z6302K NEW
|
|
- Broadcom BCM2712 quad-core Arm Cortex A76 processor @ 2.4GHz
- RAM variants up to 8GB
- Interchangeable Camera and DSI display connectors
- Dual 4Kp60
- Real-time clock
- Power button
- UART debug port
|
|
The Raspberry Pi 5 8GB single board computer. The bandwidth speed and performance of the new Raspberry Pi 5 is a step up from earlier models. |
![T5099 DC Power Control Box](https://images.altronics.com.au/thb/t/T5099.jpg) |
T5099 NEW
|
|
- Pre-wired for simple installation
- 6 rocker switches
- 3 car accessory sockets
- Dual USB. (2.1A/1A) charging ports
- Voltmeter
- 6 Way fuse lock with spare fuses
- Dual Anderson SB50 Style sockets for solar panel & battery
- 6 Cable entries
- Fused Input and output (30A)
- Durable ABS case
- Includes switch icons and word labels
|
|
A complete central power hub for your 4WD, caravan or camping remote power set up. This box contains 6 contura style illuminated switches, 3 car accessory sockets (12V), USB charger, LED volt meter, all protected by a 6 way weatherproof fuse block. |
![N2087 20A DC To DC Dual Battery Charger With MPPT Solar Input](https://images.altronics.com.au/thb/n/N2087.jpg) |
N2087 NEW
|
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 20A MPPT solar input DC to DC battery chargers has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
![Q0967 800W PV Solar Panel Tester](https://images.altronics.com.au/thb/q/Q0967.jpg) |
Q0967 NEW
|
|
- Auto/manual MPPT detection.
- Multiple protections - short circuit, reverse polarity, over voltage, over temperature, over current.
- No power supply required - no batteries.
- Large LCD with easy to read backlit display.
- Includes croc clip test cables, MC4 test cables and carry case.
|
|
Designed for measuring voltage, current and power of connected PV solar panels up to 800W. This meter provides instant feedback on PV system operation and allows optimal placement of solar panels for maximum energy conversion. |
![C7124 20W Bluetooth 5.0 Mini Portable PA System](https://images.altronics.com.au/thb/c/C7124.jpg) |
C7124 NEW
|
|
- 20W power output
- 12-15 hours usage between charges
- Includes high performance wireless headset for a high level of clarity
- Body worn or self standing
- Bluetooth 5.0 for up to 200m range
- Micro SD card slot & USB A for media playback and recording
- TWS pairing to a second unit
- Ideal for training, demonstration and education environments
- USB type C rechargeable (cable included)
- Aux and mic inputs (3.5mm cable included)
- USB mains charger included
|
|
A compact portable PA system with headset, providing a way to increase the volume of your voice when addressing small crowds. |
![A4915 2 Input Mini Mixer With Vox Muting (XLR)](https://images.altronics.com.au/thb/a/A4915.jpg) |
A4915 NEW
|
|
- 2 inputs to 1 output
- Suitable for mic or line signals
- Input 1 vox mutes input 2
- Separate controls for volume and vox sensitivity
- Vox operated 24V DC output for control of external devices
- Compact design
- 24V DC operation via 2.1mm DC jack (plugpack sold separately)
- Australian designed and manufactured
|
|
This compact 2 input mixer accepts either a line level signal or balanced microphone signal for each input. |
![PA7427 10m Reinforced Optical High Speed HDMI Cable with Ethernet](https://images.altronics.com.au/thb/p/PA7427.jpg) |
PA7427 NEW
|
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- Supports eARC
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 10m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
![A3136D 8 Way HDMI Splitter 18GBps Bandwidth](https://images.altronics.com.au/thb/a/A3136D.jpg) |
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
![S9344P 4 Channel AHD 8MP/IP/CVI/TVI Hybrid Digital Video Recorder](https://images.altronics.com.au/thb/s/S9344P.jpg) |
S9344P NEW
|
|
- Support AHD/CVI/TVI/IP/Analog Camera Input
- Up to HD 5MP and IP 8MP Resolution Recording
- Support HD Output, VGA and CVBS Video Output
- Support Max. 4CH HD or 16CH IP Camera Input
- Support 1 SATA up to 6TB Capacity
|
|
This 4 channel digital video recorder is designed to support connection analog AHD, TVI and IP cameras (PoE router may be required for IP usage). |
![S9365A 9 Channel / 4 Channel x PoE 8MP Network Video Recorder](https://images.altronics.com.au/thb/s/S9365.jpg) |
S9365A NEW
|
|
- H.264+/265+ compression
- 4K HDMI monitor output
- Recording up to 8MP @ 25fps per ch
- Supports iOS and Android remote viewing
- 4 x 15.4W PoE network interfaces
- Internal SATA interface, max 8TB
- USB backup
- Dedicated network interface
- Audio input & output
- ONVIF S/T support
|
|
This multi-channel network video recorder offers 8MP (4K) resolution recording at 25fps per camera. |
![P7460A 10m Optical DisplayPort Male to Male Lead](https://images.altronics.com.au/thb/p/P7460A.jpg) |
P7460A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. DisplayPort Male Lead, 1.8m. |