|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4565C NEW
|
|
- Tones conform to AS 1670.4
- Standard 1U 19” rack mount case
- Interfaces with Fire Indicator Boards
- Remote operation of Alert, Evac, Chime, Fire Test, Fire Alarm & Cancel tones
- MP3 based tone playback (with backup hard coded Alert, Evac and Bell tones)
- 24V DC operation
- Auto/Manual/Isolate keyswitch
- Key switch to 003 standard
- Local operation of Alert, Evac and PA
- MP3 based Voice Over messages for Alert and Evac cycles
- Microphone socket for PA use
- Provision for BGM (back ground music)
- Provision for Auxiliary input with front volume control
- Bell chime facility
- Switched 24V DC output for override relays on volume controls
- Switched 24V DC output for strobe operation for Alert mode
- Switched 24V DC output for strobe operation for Evac mode
- Switched 24VDC output for bell mode
- On-board timer for automatic Alert to Evac switchover, adjustable from 30secs to 7.5min in 30 second increments
- Externally operated inputs are activated by switching to ground
- Auxiliary level output
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
|
COMING SOONThis item is arriving soon. |
This easy to operate building alert & evacuation controller controller is designed around industry standard building requirements. When connected to a paging system amplifier, occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake. |
 |
A4660A NEW
|
|
- Standard Features:
- Touch control paging with pre and post announcement chime options.
- Adjustable microphone automatic gain control (AGC).
- High quality electret microphone with high ambient noise control and feedback rejection.
- Adjustable backlight brightness and dimmed brightness levels with selectable timeout period.
- All glass front bezel for a stylish finish for any room.
- Connects via economical Cat5e UTP cabling.
|
COMING SOONThis item is arriving soon. |
This paging console is designed to provide general paging to zones when connected to a variety of Redback products. It provides a visual indication of the status of all audio sources and zones within the system at a glance, sharing a common screen with the master wallplates available for use with these systems. |
 |
S9815C NEW
|
|
- Pro IP Dome
- 1/2.8" SONY Starvis Back-illuminated CMOS Sensor
- H.265+/H.265/H.264+/H.264 Compression Method
- 2.8mm Fixed Lens
- IR Distance 25M Max.
- Internal POE and SD Card Slot
|
|
A day/night high resolution IP dome camera with multi-codec support. Offering a clear 2592x1944 image at 30fps for integration with HD network video recorders. |
 |
R2721C NEW
|
|
|
|
- Mylar Polyester
- Non-inductive
- High temperature stability
- Ideal for coupling and bypass applications
- Tolerance: ±5%
- Temperature rating: -40 deg.C to 85ºC
Note: All quantities are supplied loose. |
 |
M8951 NEW
|
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
18V DC, 2.8 Amp switch mode plug pack supplied with a fixed positive to tip 2.1mm DC jack (2.1ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved.
|
 |
P8169 NEW
|
|
- 240V AC 10A outputs (maximum total load 2400W).
- 15 x Australian Sockets (AS/NZS 3112:2017 conforming).
- Electrical authority outlet device approved (AS/NZS 3105:2014 conforming).
- Overload protection.
- Extruded aluminium enclosure.
- 19” vertical rack mountable.
|
|
A 15 GPO outlet vertical PDU (power distribution unit) providing a neat solution to supplying mains power to your rack mounted equipment. Simply screw this panel to your rack and plug the equipment in |
 |
R2154B NEW
|
|
|
|
24mm 3 Watt Wire Wound potentiometer. 50 Ohm Linear type. |
 |
X0576A NEW
|
|
- Water and dust proof IP67 rating
- Compact radio with large backlit LCD display
- Switchable RF power (high: 5 watt, low: 1 watt)
- 3 Programmable instant channel buttons
- 80 channels
- Fast charge technology supplied with 240v and 12v adaptors
- Open/instant/priority scan
- Die-cast metal chassis
- Duplex (range extender)
- Signal monitoring
- Triple watch
- Audio scrambler
- 38 CTCSS and 104 DCS codes
- High-capacity 2600mAh Lithium-ion battery pack (up to 30 hours operating time^)
- 2.5mm jack socket with locking screw for optional accessories
|
|
The DTX600 Waterproof IP67 5 Watt Handheld UHF CB Radio is robust, powerful, benefit rich and priced for everyday use with quality features designed to optimise performance under all conditions. |
 |
X0572A NEW
|
|
- 2 watt transmit power
- LED torch
- 80 channels
- Duplex (range extender)
- 38 CTCSS & 83 DCS codes
- Backlit display
- Dual watch
- Channel scan
- Automatic squelch control
- Keypad lock
- Hands-free (VOX) capable
- 3 Year Warranty
|
|
Introducing the UHF2400 Handheld UHF CB Radio Twin Pack, complete with a convenient charging pod. These powerful 2 Watt radios are specifically designed for outdoor activities such as camping, hiking, and recreational adventures. |
 |
A4225 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
COMING SOONThis item is arriving soon. |
This 2 x 480W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4224 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
COMING SOONThis item is arriving soon. |
This 480W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4223 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
COMING SOONThis item is arriving soon. |
This 2 x 240W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4222 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
COMING SOONThis item is arriving soon. |
This 240W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4221 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
COMING SOONThis item is arriving soon. |
This 2 x 120W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
H5193 NEW
|
|
|
COMING SOONThis item is arriving soon. |
A pair of rack ears suitable for mounting two Redback A42XX zone PA amplifiers into a 1RU rack space. Includes 2 rack ears and 8 mounting screws. |
 |
H5192 NEW
|
|
|
COMING SOONThis item is arriving soon. |
A pair of rack ears suitable for mounting a single Redback A42XX zone PA amplifier into a 1RU rack space. |
 |
A4220 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
COMING SOONThis item is arriving soon. |
This 120W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4219 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
COMING SOONThis item is arriving soon. |
This 2 x 60W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
A4218 NEW
|
|
- Modular design allows for mix and match amplifiers within 1RU rack space.
- Class-D design with excellent performance and efficiency.
- LED indicators for protection mode, clipping condition and signal presence.
- 100V line or 8 ohm output via screw terminals.
- Stereo RCA line input.
- Balanced line input via 3 pin Euroblock pluggable terminal.
- High pass filter at 180Hz -3dB.
- Built-in short circuit, overload and high temperature protection.
- 2 year warranty.
|
COMING SOONThis item is arriving soon. |
This 60W PA zone amplifier developed by Redback, allows installers to mix and match amplifiers within a 1RU 19” rack space. |
 |
C0446SS NEW
|
|
|
|
3 pin XLR microphone connector mounted horizontally on a brushed stainless steel wall plate. “One-Shot” version with screw terminal connections for quick and easy connection on site. |
 |
C0448SS NEW
|
|
|
|
Dual 3 pin XLR microphone connectors mounted horizontally on a brushed stainless steel wall plate. “One-Shot” version with screw terminal connections for quick and easy connection on site. |
 |
D0889 NEW
|
|
- Offering the best protection in its class, protecting against damaging surges
- Modern, stylish LCD display indicates voltage in/out, amount of load and remaining capacity
- The AVR automatically bucks/boosts unstable fluctuating utility voltages, bringing them within 10% of nominal voltage range and thereby protecting valuable equipment
- Compact design at just 300mm deep
- Intelligent slot for SNMP communications card
- Battery is easily hot swappable and user replaceable
- Designed to run cool without fans
- After an extended power outage the UPS will turn back on and resume equipment functionality once power has returned
- Allows for orderly shutdown without software
- Free, downloadable NetGuard software provides complete power monitoring
- The plugged in UPS will continue to charge internal batteries whether the unit is on or off
- Comes standard with 5 Australian sockets and 2 IEC outlets.
- The UPS can turn on equipment when it is off, simply by connecting equipment and turning the UPS on
- Plug and play on any computer or NAS drive
|
|
The Defender Rackmount 1500VA UPS expands the successful Defender Range by building the popular features into a Rack Mount style. At 300mm deep, this is the perfect UPS for shallow, wall mounted Comms cabinets. |
 |
ME8967 NEW
|
|
- MEPS efficiency level V
- Australian Standards Compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC 0.5A 3 pin plug pack. |
|
M8945B NEW
|
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
15V DC Switchmode Plugpack Supplied with fixed 2.1mm DC positive tip. Compact design with high current regulated output. Energy authority approved. MEPS approved.
15VDC @ 3.5A.
|
 |
Q1058 NEW
|
|
- Large easy to read 20000 count screen
- Folding design stays stable on any surface
- Use it on the bench top or in the field
- Autoranging
- Handy automotive testing functions
- Non-contact AC voltage detection >90V AC
- Data hold, min/max relative modes
- In-built lithium battery pack - no batteries required!
- USB C rechargeable
- Temperature measurement (sensor included)
|
|
This folding autoranging digital multimeter provides in depth functionality for technicians troubleshooting devices and circuits. |
