|
Description |
Downloads |
Specs |
Ordering |
|
 |
C5205 NEW
|
|
- Subwoofer: 10"
- Frequency response: 30Hz - 250Hz (-10dB), 50Hz - 250Hz @ 18dB / octave.
- Inputs: Line level RCA, Speaker level binding posts.
- Output power: 200 Watts @ THD< 0.5%
- Enclosure material: Matte black laminated wood, black speaker cloth grille.
- Power: 240V AC input.
- Dimensions: 442 x 246 x 410mm.
|
|
This stunning high power home cinema subwoofer adds plenty of bottom end bass reproduction to any home theatre or hi-fi system. Very compact considering the high spec 10 inch bass driver employed. The inbuilt 200W amp accepts either a speaker or a line level input. |
 |
H1616 NEW
|
|
- Made of carbon micro-particles, guaranteeing extremely high thermal conductivity.
- Advanced materials make application easy, even for beginners.
- Metal-free and non-conductive, which eliminates any risks of causing short circuit and static.
- Does not compromise over time, provides high performance for over 5 years.
|
|
High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.
2g Syringe |
 |
R4823 NEW
|
|
- Tolerance: ±20%
- Pitch: 2mm
- Diameter: 5mm
- Height: 11mm
- Voltage: 16V DC
- Surge Voltage: 20V DC
- Ripple Current: 110mA
- Temperature Range: -40°C to +105°C
|
|
High temperature rating (105C ) for constant reliable operation
Note: Sleeve colour may be black or green. |
 |
P7430B NEW
|
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- Utilises quality German made chipset.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
- Minimum bend radius 2cm.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
P7403A NEW
|
|
- Length: 3 metres
- Ethernet channel
- Enhanced Audio return channel
- Supports 8K resolutions at 60Hz
- Supports 4K resolutions at 120Hz
- 3D over HDMI
- 48Gbit/s bandwidth
- HDCP 2.2 compliant
- Auto low latency mode
- Supports HDR
- Supports 48 bit Deep Colour
- Supports Dolby® Digital & DTS®
- Supports Dolby® TrueHDTM & DTS®-HD Master Audio
- Supported resolutions:
- 4K @50/60Hz
- 4K @100/120Hz
- 5K @50/60Hz
- 5K @100/120Hz
- 8K @50/60Hz
|
|
HDMI certified. Lifetime warranty. Diecast aluminium plugs with gold plated contacts. Butyl rubber sheath for durability. Internal mylar foil shielding for improved performance.
|
 |
M8195C NEW
|
|
- Compact design with 24000mAh (88.8Wh) internal battery pack
- 2400A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- 90W USB type C PD input and output
- Can be used as a USB power bank to keep devices charged on the go.
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
P0074B NEW
|
|
|
|
6.35mm chassis mount insulated stereo socket with DPDT
isolated switch. Insulated from chassis. |
 |
P1939C NEW
|
|
- 2-in-1 design allowing you to charge your phone and listen to music
- Plug and play functionality
- Built in 32bit/384KHz CX31993 DAC
- Short length makes it ideal to keep in your bag, desk or beside table
- Simultaneous charging and audio output
- Compatible with standard 3.5mm headphone jack audio receivers
|
|
This USB-C charging cable and headphone adaptor allows you to not only listen to music but also charge your phone. The adaptor provides 60W PD charging passthrough. |
 |
M8870 NEW
|
|
- Input: 110-240V AC 50/60Hz 1.8A (max)
- Output (USB C): 5V/3A, 9V/3A, 12V/3A, 15/3A, 20V/5A, 28V/5A
- (140W max PD 3.1/PPS)
- Output (USB A): 4.5V/5A, 5V/4.5A, 9V/2A, 12V/1.5A (18W max)
- Output (USB C1+2+3+USB A): 65W+45W+5V/4A (130W max)
- Dimensions: 65 x 65 x 32mm
|
|
140W four output USB wall charger with 3 x USB power delivery charging up to 140W max (PD 3.1/PPS). Equipped with GaN charging chip. |
 |
S2752 NEW
|
|
- Input: 12-24V DC
- Rocker switches: 4x Rocker switches with blue LED 20A 12V
- Anderson style donnectors: 2 x 50A Anderson style connectors
- Protection: 2 x 15A blade fuses
- Car accessory socket: 15A 12V
- USB Type-A Ports: 5V/1A & 5V/2.1A
- Housing: Nylon & includes M4 stainless screws
- Size: 160 x 60 x 80mm
|
|
Switch all your gear on and off with this handy power control plate for cars, caravans and 4WDs. Includes; 4x Rocker switches with blue LED, 2x 50A Anderson style connectors with covers, 1x 12V Car Accessory socket and 2x 5V USB Type-A Ports.
|
 |
T5096 NEW
|
|
- A complete pre-wired DC connection solution for your auxiliary battery.
- Ideal for caravans, 4WDs and motorhomes.
- Backlit display readout with input volts DC, temperature, watts (input) and connection statuses.
- Power up to 13 different devices/appliances at once!
- USB charging: 2 x 2.4A USB-A outputs, 2 x QC3.0 USB-A outputs, 1 x USB-C PD 20W output, 1 x USB-C PD 100W output.
- Four 50A Anderson style connections (1 input, 3 output).
- Appliance power: 2 x car accessory sockets, 2x DC coaxial barrel outputs (5.5 x 2.1mm).
- Top mount LED torch light.
- Includes brackets for surface mounting.
|
|
A complete pre-wired DC connection solution for your auxiliary battery. Ideal for caravans, 4WDs and motorhomes. Backlit display readout with input volts DC, temperature, watts (input) and connection statuses. |
 |
C2065 NEW
|
|
- Ideal for the following applications; siren, playback or pre-recorded content or real time reinforment through microphone
- High on SPL, small in size
- Weather proof housing
- Complimentary grey colour housing
- Mountable to either the bonnet or top of vehicle
- Heavy duty low profile metal bracket
|
|
This horn is compact, lightweight, weatherproof and very efficient. The voice coil is wound on an aluminium bobbin providing effective heat transfer from the coil thereby improving the efficiency and reliability of the speaker. |
 |
C2035 NEW
|
|
|
|
A durable weather resistant horn speaker designed for use in conjunction with the Merlaud IP communicator PA system. It features an in-built amplifier and can be powered by 12-24V DC power supply or PoE as required. The sturdy mounting bracket is u shaped and secured with stainless steel hardware. |
 |
C2095 NEW
|
|
- Active speaker with network audio source built in
- High performance ARM processor
- Built-in amplifier
- Integrates with the Merlaud IP communicator system over a standard network switch.
- Tool free easy spring ceiling mounting
- White RAL 9010 epoxy coated aluminium grill and ABS chassis.
- Communication delay <50ms.
|
|
A compact low profile in-ceiling speaker designed for use in conjunction with the Merlaud IP communicator PA system. It features an in-built amplifier and can be powered by 12-24V DC power supply or PoE as required. Requires 170mm mounting hole. |
 |
A4872 NEW
|
|
- Interfaces with the Merlaud A4865 zone encoder to interface analogue PA systems with IP paging system.
- Designed in conjunction between Altronics Redback PA team and Merlaud.
- Converts all system audio singles back to analogue stereo RCA output (or speaker level) for connection to zone PA amp.
- Connects to ethernet switch (and on to paging console and encoder) using UTP Cat6 cabling.
- Versatile design can be used in facilities with multiple buildings.
- Facilitates paging, bell or emergency evacuation tones.
- Allows operation of 100V line override relays for full volume in evacuation conditions.
|
|
The zone decoder provides a way to interface traditional stereo and 100V line PA systems with the Merlaud IP communicator system. |
 |
A4865 NEW
|
|
- Interfaces with the Merlaud A4868 paging console and A4872 zone decoder boxes.
- Designed in conjunction between Altronics Redback PA team and Merlaud.
- Flexible design bridges the gap between IP PA systems and traditional analogue 100V line zone PA.
- Versatile design can be used in facilities with multiple buildings.
- Connects to ethernet switch (and to paging console and decoders) using UTP Cat6 cabling.
- Facilitates playback of alert and evacuation tones, schools bells and recorded messaging.
- Zone level do not disturb settings.
- BGM muting by PA, bell or emergency tones.
- Operates with 100V line override relays to ensure full volume evacuation warnings when initiated.
|
|
The zone encoder is a 19" rack mount audio encoder which works in conjunction with the Merlaud A4868 touchscreen paging console. |
 |
A4868 NEW
|
|
- Up to 24 zones of paging, BGM and message playback.
- Designed in conjunction between Altronics Redback PA team and Merlaud.
- Flexible design bridges the gap between IP PA systems and traditional analogue 100V line zone PA.
- Simple touchscreen operation.
- Versatile design can be used in facilities with multiple buildings.
- Connects to ethernet switch (and to paging console and decoders) using UTP Cat6 cabling.
- Facilitates playback of alert and evacuation tones, schools bells and recorded messaging.
- Zone level do not disturb settings.
- BGM muting by PA, bell or emergency tones.
- Operates with 100V line override relays to ensure full volume evacuation warnings when initiated.
|
|
This paging controller is the heart of the system where all commands are initiated. It provides zone PA selection, multi-zone recall, background music (BGM) selection and do not disturb settings. |
 |
HD5809 NEW
|
|
- Open frame design with hinged front face.
- Spring loaded automatic latching retainers.
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
|
|
An open frame hinged wall mount 9RU 19” rack system designed for wall mounting equipment up to 420mm deep. Ideal for combinations of patch panels, security and audio equipment. |
 |
HD5806 NEW
|
|
- Open frame design with hinged front face.
- Spring loaded automatic latching retainers.
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
|
|
An open frame hinged wall mount 6RU 19” rack system designed for wall mounting equipment up to 420mm deep. Ideal for combinations of patch panels, security and audio equipment. |
 |
HD5218 NEW
|
|
- 18RU rack height.
- Open frame design with side load wall mounting (equipment is 90° to the wall face)
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
|
|
This 18RU 19" open rack frame allows you the option of side mounting to the wall surface, or use as a freestanding rack on castors. |
 |
HD5215 NEW
|
|
- 15RU rack height.
- Open frame design with side load wall mounting (equipment is 90° to the wall face)
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
|
|
This 15RU 19" open rack frame allows you the option of side mounting to the wall surface, or use as a freestanding rack on castors. |
 |
HD5212 NEW
|
|
- 12RU rack height.
- Open frame design with side load wall mounting (equipment is 90° to the wall face)
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
|
|
This 12RU 19" open rack frame allows you the option of side mounting to the wall surface, or use as a freestanding rack on castors. |
 |
P1998C NEW
|
|
- Length: 15cm
- Input Type: USB C
- Output Type: USB C
- Lead Type: USB 3.1
- Data Transfer Rate: Up to 5.0Gbps
|
|
USB 3.1 Type C Male to C Male. Short length ideal for multi bay chargers.
Length: 15cm. 100W power delivery. |
 |
C5162 NEW
|
|
- Lightweight & easy to carry.
- Simple top mounted controls.
- Handy device holder slot in top.
- USB & microSD playback and recording.
- Wired aux input
- Wired microphone inputs (2)
- FM radio
- Multi-function front panel display
- True wireless stereo operation - pairs to a second unit for more sound.
- RGB party light ring.
- 3600mAh battery for up to 8 hours use.
- 2 x 40W RMS 6.5" woofers & 1" tweeter.
|
|
The Dynalink Entertainer Pro XL provides great sound for your next gathering with True Wireless Stereo (TWS) and RGB party lighting for added atmosphere. 3-8 hours use per charge. Lightweight and ready to set up anywhere. |
 |
C5161 NEW
|
|
- Lightweight & easy to carry.
- Simple top mounted controls.
- Handy device holder slot in top.
- USB & microSD playback and recording.
- Wired aux input
- Wired microphone inputs (2)
- FM radio
- Multi-function front panel display
- True wireless stereo operation - pairs to a second unit for more sound.
- RGB party light ring.
- 3600mAh battery for up to 8 hours use.
- 40W RMS 6.5" woofer & 1" tweeter.
|
|
The Dynalink Entertainer Pro X provides great sound for your next gathering with True Wireless Stereo (TWS) and RGB party lighting for added atmosphere. 3-8 hours use per charge. Lightweight and ready to set up anywhere. |
