 |
Z6319 NEW
|
|
- Large 3-digit display of measured temperature
- Operates in both a heating and cooling mode of operation
- Programmable settings for temp set point, temp hysteresis, compressor delay and temperature calibration.
- Waterproof NTC temperature sensor has -50 to +99.9°C measurement range with ±1°C accuracy
- Over temperature and sensor failure audible and visual alarm
- Unit temperature reading can be calibrated
- Relays switch up to 120/240VAC @ 10A or 15VDC @ 10A
- 12VDC module operation
|
|
The STC-1000 temperature controller is a self contained heating / cooling controller that operates on 12VDC and controls either AC or DC loads up to 10A max current. |
 |
H1633 NEW
|
|
- Displaces, penetrates, lubricates and protects
- Contains no silicon, acid, kerosene, dieselene or toxic compounds
- Will not harm metal points or surfaces, plastics, paints, enamels, fibreglass, formica or neoprene seals
- Doesn’t dry out, gum up, become gooey or sticky or wash off with water
- Non-toxic, non-static, non-corrosive non-conductive and non-staining
- Odourless, no dye or masking agents added
|
|
INOX MX3FG Food Grade Lubricant is a multi-purpose oil based spray designed for use on food processing and handling equipment. Spraying on surfaces creates an anti-rust film to protect from any corrosion or moisture that can occur. |
 |
M8976B NEW
|
|
- MEPS efficiency level: V
- Australian standards compliant
- Suitable for a range of electronic devices
|
|
Super-compact regulated power supplies. Energy authority approved. MEPS approved. All models are Energy Authority approved and suitable for shipping with other OEM products. Require P 8410C IEC lead. Dimensions: 167 x 65 x 40mm. |
 |
P8253 NEW
ROHS
|
|
|
|
Suits panel thickness 1.0 to 3.0mm. Mounting depth 26mm. Black
|
 |
D2359C NEW
|
|
- 100W Power Delivery pass-through USB-C port.
- Two USB-C 2.0 peripheral ports.
- HDMI output port for monitor (maximum 4K @ 30Hz).
- USB-C connection to device.
- Micro SD and SD card reader.
- USB-A 3.2 Gen 1 port
|
|
This multi hub provides connection for an external monitor via HDMI up to 4K @ 30Hz and additional peripherals in a compact design. 100W PD passthrough. |
 |
SW1047 NEW
|
|
- Rating: 30A 12V DC, 20A 125V AC, 15A 250V AC
- Panel Cut-Out Size: 12mm
- Waterpoof Degree: IP67
- Function: ON-OFF DPST (Alternate)
- Terminal: 6mm spade
- Contact Resistance: ≤25mΩ
- Insulated Resistance: 100 mΩ min.at 500VDC
- Operating Temperature: -25°C to +85°C
- Electrical Life: ≥50,000 Cycles
|
|
This 30A 12V DC / 15A 250V AC toggle switch offers IP67 water and dust protection for industrial applications. DPST |
 |
N2089A NEW
|
|
- Heavy duty aluminium case and mounting bracket
- Microchip monitoring and control
- Fully automatic high frequency multi stage charging
- MPPT solar regulator input
- Compatible with vehicles fitted with smart alternators
- Pulse mode technology that reduces oxidation, evens electrolyte consistency and minimises temperature equating to longer battery life
- Easy push button chemistry select: AGM/Gel, Calcium, LiON, Deep Cycle, VRLA and conventional flooded Lead-Acid batteries
- Internal charger temperature monitoring and power output control
- LED indicators showing state of charge
- Over charging, short circuit and over temperature protection
- Reverse polarity protection: Input reverse polarity protection and Output reverse polarity protection
- Thermal overload protection
- Solar input overload protection
- Power cut memory function; once selected, the charger will remain on this battery type until it is changed
|
|
This 40A DC to DC battery charger with MPPT solar charger has been designed for in-vehicle use where auxiliary batteries are required to be charged from solar panels or the vehicles main battery. |
 |
D2325A NEW
|
|
- 4 in 1 design - charge your phone, earbuds, watch and another devices simultaneously.
- 15W wireless phone charging.
- Watch charging adaptor flips over to suit either Apple or Samsung watches.
- Auxiliary USB C output cable inside base.
- Folding design is ideal for travel use.
- Use laying flat or unfolded upright position.
- LED charge status indicators.
- USB-C cable included.
|
|
A powerful all in one charging stand for you to keep your watch, earbuds and phone charged up and ready to go when you need it. The folding design is ideal for travel too, allowing you to set up and start charging up to 4 devices simultaneously. |
 |
C5205 NEW
|
|
- Subwoofer: 10"
- Frequency response: 30Hz - 250Hz (-10dB), 50Hz - 250Hz @ 18dB / octave.
- Inputs: Line level RCA, Speaker level binding posts.
- Output power: 200 Watts @ THD< 0.5%
- Enclosure material: Matte black laminated wood, black speaker cloth grille.
- Power: 240V AC input.
- Dimensions: 442 x 246 x 410mm.
|
|
This stunning high power home cinema subwoofer adds plenty of bottom end bass reproduction to any home theatre or hi-fi system. Very compact considering the high spec 10 inch bass driver employed. The inbuilt 200W amp accepts either a speaker or a line level input. |
 |
H1616 NEW
|
|
- Made of carbon micro-particles, guaranteeing extremely high thermal conductivity.
- Advanced materials make application easy, even for beginners.
- Metal-free and non-conductive, which eliminates any risks of causing short circuit and static.
- Does not compromise over time, provides high performance for over 5 years.
|
|
High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer.
2g Syringe |
 |
R4823 NEW
|
|
- Tolerance: ±20%
- Pitch: 2mm
- Diameter: 5mm
- Height: 11mm
- Voltage: 16V DC
- Surge Voltage: 20V DC
- Ripple Current: 110mA
- Temperature Range: -40°C to +105°C
|
|
High temperature rating (105C ) for constant reliable operation
Note: Sleeve colour may be black or green. |
 |
P7430B NEW
|
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- Utilises quality German made chipset.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
- Minimum bend radius 2cm.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
P7403A NEW
|
|
- Length: 3 metres
- Ethernet channel
- Enhanced Audio return channel
- Supports 8K resolutions at 60Hz
- Supports 4K resolutions at 120Hz
- 3D over HDMI
- 48Gbit/s bandwidth
- HDCP 2.2 compliant
- Auto low latency mode
- Supports HDR
- Supports 48 bit Deep Colour
- Supports Dolby® Digital & DTS®
- Supports Dolby® TrueHDTM & DTS®-HD Master Audio
- Supported resolutions:
- 4K @50/60Hz
- 4K @100/120Hz
- 5K @50/60Hz
- 5K @100/120Hz
- 8K @50/60Hz
|
|
3m HDMI male to HDMI male cable. Skinny low profile plugs and ultra-slim cable. These leads provide a better fit for crowded connection panels and are ideal to take ‘on the go’ with your laptop. Capable of 4K @ 120hz and 8K @ 60hz with 32 channels of audio.
|
 |
M8195C NEW
|
|
- Compact design with 24000mAh (88.8Wh) internal battery pack
- 2400A peak current output for jumpstarting 4, 6 and 8 cylinder vehicles (inc diesels).
- 90W USB type C PD input and output
- Can be used as a USB power bank to keep devices charged on the go.
- Includes DC output with cigarette lighter socket lead for powering car fridge, lighting, and other portable 12V appliances.
- Includes heavy duty battery clamps, USB type C charging cable and DC to Car Accessory socket adapter
- Supplied with hard wearing zip up carry case.
- Dual USB charging outputs
- 1W LED torch
|
|
This lithium battery pack is suitable for jump starting 12V battery equipped vehicles such as cars, 4WDs and agricultural equipment. |
 |
P0074B NEW
|
|
|
|
6.35mm chassis mount insulated stereo socket with DPDT
isolated switch. Insulated from chassis. |
 |
P1939C NEW
|
|
- 2-in-1 design allowing you to charge your phone and listen to music
- Plug and play functionality
- Built in 32bit/384KHz CX31993 DAC
- Short length makes it ideal to keep in your bag, desk or beside table
- Simultaneous charging and audio output
- Compatible with standard 3.5mm headphone jack audio receivers
|
|
This USB-C charging cable and headphone adaptor allows you to not only listen to music but also charge your phone. The adaptor provides 60W PD charging passthrough. |
 |
M8870 NEW
|
|
- Input: 110-240V AC 50/60Hz 1.8A (max)
- Output (USB C): 5V/3A, 9V/3A, 12V/3A, 15/3A, 20V/5A, 28V/5A
- (140W max PD 3.1/PPS)
- Output (USB A): 4.5V/5A, 5V/4.5A, 9V/2A, 12V/1.5A (18W max)
- Output (USB C1+2+3+USB A): 65W+45W+5V/4A (130W max)
- Dimensions: 65 x 65 x 32mm
|
|
140W four output USB wall charger with 3 x USB power delivery charging up to 140W max (PD 3.1/PPS). Equipped with GaN charging chip. |
 |
S2752 NEW
|
|
- Input: 12-24V DC
- Rocker switches: 4x Rocker switches with blue LED 20A 12V
- Anderson style donnectors: 2 x 50A Anderson style connectors
- Protection: 2 x 15A blade fuses
- Car accessory socket: 15A 12V
- USB Type-A Ports: 5V/1A & 5V/2.1A
- Housing: Nylon & includes M4 stainless screws
- Size: 150 x 120 x 100mm (H x W x D)
|
|
Switch all your gear on and off with this handy power control plate for cars, caravans and 4WDs. Includes; 4x Rocker switches with blue LED, 2x 50A Anderson style connectors with covers, 1x 12V Car Accessory socket and 2x 5V USB Type-A Ports.
|
 |
T5096 NEW
|
|
- A complete pre-wired DC connection solution for your auxiliary battery.
- Ideal for caravans, 4WDs and motorhomes.
- Backlit display readout with input volts DC, temperature, watts (input) and connection statuses.
- Power up to 13 different devices/appliances at once!
- USB charging: 2 x 2.4A USB-A outputs, 2 x QC3.0 USB-A outputs, 1 x USB-C PD 20W output, 1 x USB-C PD 100W output.
- Four 50A Anderson style connections (1 input, 3 output).
- Appliance power: 2 x car accessory sockets, 2x DC coaxial barrel outputs (5.5 x 2.1mm).
- Top mount LED torch light.
- Includes brackets for surface mounting.
|
|
A complete pre-wired DC connection solution for your auxiliary battery. Ideal for caravans, 4WDs and motorhomes. Backlit display readout with input volts DC, temperature, watts (input) and connection statuses. |
 |
C2065 NEW
|
|
- Ideal for the following applications; siren, playback or pre-recorded content or real time reinforment through microphone
- High on SPL, small in size
- Weather proof housing
- Complimentary grey colour housing
- Mountable to either the bonnet or top of vehicle
- Heavy duty low profile metal bracket
|
|
This horn is compact, lightweight, weatherproof and very efficient. The voice coil is wound on an aluminium bobbin providing effective heat transfer from the coil thereby improving the efficiency and reliability of the speaker. |
 |
HD5809 NEW
|
|
- Open frame design with hinged front face.
- Spring loaded automatic latching retainers.
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
- Load bearing capacity 25kg
|
|
An open frame hinged wall mount 9RU 19” rack system designed for wall mounting equipment up to 420mm deep. Ideal for combinations of patch panels, security and audio equipment. |
 |
HD5806 NEW
|
|
- Open frame design with hinged front face.
- Spring loaded automatic latching retainers.
- SPCC 1.5mm cold rolled steel construction with industrial strength powdercoating.
- Designed to comply with 19" international standard.
- RAL9004/5 black colour.
- Supplied flat pack - assembles quickly.
- Load bearing capacity 20kg
|
|
An open frame hinged wall mount 6RU 19” rack system designed for wall mounting equipment up to 420mm deep. Ideal for combinations of patch panels, security and audio equipment. |
 |
P1998C NEW
|
|
- Length: 15cm
- Input Type: USB C
- Output Type: USB C
- Lead Type: USB 3.1
- Data Transfer Rate: Up to 5.0Gbps
|
|
USB 3.1 Type C Male to C Male. Short length ideal for multi bay chargers.
Length: 15cm. 100W power delivery. |
 |
C5162 NEW
|
|
- Lightweight & easy to carry.
- Simple top mounted controls.
- Handy device holder slot in top.
- USB & microSD playback and recording.
- Wired aux input
- Wired microphone inputs (2)
- FM radio
- Multi-function front panel display
- True wireless stereo operation - pairs to a second unit for more sound.
- RGB party light ring.
- 3600mAh battery for up to 8 hours use.
- 2 x 40W RMS 6.5" woofers & 1" tweeter.
|
|
The Dynalink Entertainer Pro XL provides great sound for your next gathering with True Wireless Stereo (TWS) and RGB party lighting for added atmosphere. 3-8 hours use per charge. Lightweight and ready to set up anywhere. |
 |
C5161 NEW
|
|
- Lightweight & easy to carry.
- Simple top mounted controls.
- Handy device holder slot in top.
- USB & microSD playback and recording.
- Wired aux input
- Wired microphone inputs (2)
- FM radio
- Multi-function front panel display
- True wireless stereo operation - pairs to a second unit for more sound.
- RGB party light ring.
- 3600mAh battery for up to 8 hours use.
- 40W RMS 6.5" woofer & 1" tweeter.
|
|
The Dynalink Entertainer Pro X provides great sound for your next gathering with True Wireless Stereo (TWS) and RGB party lighting for added atmosphere. 3-8 hours use per charge. Lightweight and ready to set up anywhere. |
