|
Description |
Downloads |
Specs |
Ordering |
|
 |
P0023 ROHS
|
|
- Electrical
- Dielectric strength: 0.5 kVdc
- Insulation resistance: ≥ 1 GΩ
- Rated current: depends on mated connector
- Contact resistance: depends on mated connector
- Mechanical
- Cable: O.D.4 mm
- Insertion force: ≤ 20 N
- Withdrawal force: ≥ 10 N
- Lifetime: 1000 mating cycles
- Material
- Contact plating: Nickel
- Contacts: Brass (CuZn39Pb3)
- Shell: Zinc die cast (ZnAl4Cu1)
- Shell plating: Nickel
- Strain relief: SnCe plated, crimp type
- Insulation: Thermoplastic
- Environmental
- Solderability: Complies with IEC 68-2-20
- Temperature range-25 °C to +70 °C
|
|
High quality Neutrik line jack plug. 4mm cable entry |
 |
P0034A |
|
- Electrical
- Dielectric strength: 0.5 kVdc
- Insulation resistance: ≥ 1 GΩ
- Rated current: depends on mated connector
- Contact resistance: depends on mated connector
- Mechanical
- Cable: O.D.4 mm
- Insertion force: ≤ 20 N
- Withdrawal force: ≥ 10 N
- Lifetime: 1000 mating cycles
- Material
- Contact plating: Nickel
- Contacts: Brass (CuZn39Pb3)
- Shell: Zinc diecast (ZnAl4Cu1)
- Shell plating: Nickel
- Strain relief: SnCe plated, crimp type
- Insulation: Thermoplastic
- Environmental
- Solderability: Complies with IEC 68-2-20
- Temperature range: -25 °C to +70 °C
|
|
High quality Neutrik line jack plug. 4mm cable entry rean |
 |
P0772 |
|
- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. Power Out version. NAC3FCB 20A 250V. SAA approved. |
 |
P0772A NEW
|
|
- Locking 20 A / 240 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. Power Out version. NAC3FXXB-W-S 20A 240V. SAA approved. |
 |
P0773 |
|
- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
- Unique Neutrik chuck type strain relief
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. NAC3FCA 20A 250V. SAA approved. |
 |
P0773A NEW
|
|
- IEC EN 60320-1 / UL 60320-1 / CSA Â C22.2 No. 60320-1 certified, thus accepted as a component for cord sets acc. to IEC 60799 / UL 817 and equipment acc. to IEC 62368-1Â
- Ergonomic design with slip-proof two-component moulded housingÂ
- Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating Â
- Unique NEUTRIK locking bushing and strain relief for cable diameters 6 mm to 12 mmÂ
- Easy to assemble because the strain relief locks with the insert mechanically and aligns with the housing
- Superior NEUTRIK quality standard, extremely robust and reliable
- Easy and reliable twist lock systemÂ
- Improved kink protection by two-component bushing
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. NAC3FXXA-W-S 20A 250V. SAA approved. |
 |
P0774 |
|
- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. Power Out. NAC3MPB-1 20A 250V. SAA approved. |
 |
P0775A NEW
|
|
- Locking 20 A / 250 V ac appliance coupler
- 3 contacts for line, neutral and premating safety ground
- Fast and easy twist lock latching system
- Extremely robust and reliable
- Ergonomic design
- User friendly latch design for easy handling
|
|
Extra heavy duty Neutrik Powercon connector as used in commercial lighting and audio applications. NAC3MPXXA 20A 250V. SAA approved. |
 |
P0780 |
|
|
|
Dust cover for the rear of the P0775 chassis socket.
Neutrik Part No. SCDR |
 |
P0789 |
|
- SpeakOn® or Lockable Speaker Connectors can be wired up in a variety of ways for different applications. Two positive and two negative pins are provided allowing two channels of audio to be passed via a single connector. In single channel applications only +1 and -1 will be connected.
|
|
Heavy duty, robust construction. As used on many professional amplifiers and speaker boxes. Handles up to 30A current and the inline plug can accept up to 8mm cable diameter. Genuine Speak-On connector manufactured by Neutrik. |
 |
P0792 ROHS
|
|
|
|
Heavy duty 4 pin connectors as used on professional amplifiers and speaker boxes. Handles up to 30A current. Genuine Speak-On connector manufactured by Neutrik. |
 |
P0795 ROHS
|
|
-
- SpeakOn® or Lockable Speaker Connectors can be wired up in a variety of ways for different applications. Two positive and two negative pins are provided allowing two channels of audio to be passed via a single connector. In single channel applications only +1 and -1 will be connected.
|
|
Heavy duty, robust construction. As used on many professional amplifiers and speaker boxes. Handles up to 30A current and the inline plug can accept up to 8mm cable diameter. Genuine Speak-On connector manufactured by Neutrik. |
 |
P0795A NEW
|
|
-
- SpeakOn® or Lockable Speaker Connectors can be wired up in a variety of ways for different applications. Two positive and two negative pins are provided allowing two channels of audio to be passed via a single connector. In single channel applications only +1 and -1 will be connected.
|
|
The Neutrik NL4FXX-W-S 4-pole speakON cable connector has a screw terminal assembly and chuck type strain relief for cable diameters 6 to 12 mm. |
 |
P0829 ROHS
|
|
- Two standards are commonly used for defining common RJ-45 termination pinouts. 568A is the most commonly used in Australia for end to end termination of twisted pair cables.
- When connecting a PC to a switch, a "straight-through" cable is required. This is 568A to 568A.
- When connecting a PC directly to another PC a "crossover" cable is required. This is 568A to 568B.
|
|
RJ45 Cat6 Line Plug in diecast Neutrik housing
Neutrik® part no. NE8MC6-MO |
 |
P0830 ROHS
|
|
|
|
D series shielded Cat6 RJ45 chassis connector.
NE8FDY-C6 |
 |
P0832 ROHS
|
|
|
|
P 0832 is a line plug housing only. RJ45 Modular plug must be purchase separately.
|
 |
P0833 ROHS
|
|
|
|
HDMI sockets on both sides of connector for use with pre-made leads. ROHS.
HDMI Version 1.3. Standard 'D' shape housing for easy mounting. |
 |
P0834 ROHS
|
|
|
|
'back to back' RJ45 socket for easy termination on patch panels. |
 |
P0836 ROHS
|
|
- Ideal for audio networking and integration of computer based equipment into audio systems
- USB 2.0 gender changer type A-B (B-A)
- Reversible insert offering type A or B on front or rear end
- Universally accepted standard D-shape housing
- Removable screen to chassis grounding
|
|
Chassis USB Type A/Type B reversible. |
 |
P0837 ROHS
|
|
- Ideal for audio networking and integration of computer based equipment into audio systems
- USB 2.0 gender changer type A-B (B-A)
- Reversible insert offering type A or B on front or rear end
- Universally accepted standard D-shape housing
- Removable screen to chassis grounding
|
|
Chassis USB Type A/Type B reversible. |
 |
P0839 |
|
- USB 3.0 feedthrough adapter
- Reversible insert offering type A or B on front or rear end
- Standard D-shape housing
- Removable screen for chassis grounding
- Meets USB 3.0 specifications
|
|
Chassis USB Type A/Type B reversible. |
 |
P0840 ROHS
|
|
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
|
|
Neutrik 3 Pin Line XLR female connector.
Neutrik connectors are made from rugged diecast aluminium and are designed to be compact yet stand up to the rigours of everyday use. Connector assembly is designed to be as simple as possible, saving you time |
 |
P0842 ROHS
|
|
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
|
|
Neutrik 3 Pin Line XLR male connector.
Neutrik connectors are made from rugged diecast aluminium and are designed to be compact yet stand up to the rigours of everyday use. Connector assembly is designed to be as simple as possible, saving you time wh |
 |
P0850 ROHS
|
|
|
|
Neutrik 3 Pin Chassis XLR female connector.
Neutrik connectors are made from rugged diecast aluminium and are designed to be compact yet stand up to the rigours of everyday use. RF shielding via 3 point contact to shell. Fitted with M3 mounting holes. |
 |
P0852 ROHS
|
|
- Robust "D" metal shell
- Standardized D sized 24 mm panel cutout
- Solder cups on 3 - 7 pole version
|
|
Neutrik 3 Pin Chassis XLR male connector.
Neutrik connectors are made from rugged diecast aluminium and are designed to be compact yet stand up to the rigours of everyday use. RF shielding via 3 point contact to shell. Fitted with threaded M3 mounting |
Neutrik
