|
Description |
Downloads |
Specs |
Ordering |
|
 |
PS1602B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
|
PS1603B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
|
PS1605B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
|
PS1607B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
 |
PS1806B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
 |
PS1807B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
|
PS1808B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
|
PS1809B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
|
PS1811B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
|
PS1812B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
|
PS1815B |
|
- Ultra thin diameter: 3.5mm
- 100% copper conductors
- T568A configuration
- Fitted with Category 6 compliant RJ plug
- Fully moulded strain-relief boot
- Snagless flush moulded boots
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
Ultra thin cables ideal for high density patch panel use. |
 |
PW1897A NEW
|
|
- 1.5m length.
- USB 2.0 connectivity with speeds up to 480Mbps.
- Suits most operating systems.
- Compatible with both USB 2.0 and USB 3.0 devices (at USB 2.0 speeds).
- Supports data transfer and device charging.
|
|
Type A Male to Micro B Male
Length: 1.5m |
 |
PW1989B NEW
|
|
- 1m length.
- USB 2.0 connectivity with speeds up to 480Mbps.
- Suits most operating systems.
- Compatible with both USB 2.0 and USB 3.0 devices (at USB 2.0 speeds).
- Supports data transfer and device charging.
- Supports maximum charging current of 3A.
- White outer sheath with metallic finish plugs.
|
|
USB 2.0 Type A Male to Type C Male
Length: 1m |
 |
PW1994A NEW
|
|
- 1m length.
- USB 3.0 connectivity with speeds up to 5Gbps.
- Suits most operating systems.
- Backward compatible with both USB 2.0 devices (at USB 2.0 speeds).
- Supports data transfer and device charging.
- Supports maximum charging current of 3A.
|
|
USB 3.0 Type A Male to C Male
Length: 1m |
 |
PW1995B NEW
|
|
|
|
USB 3.0 Type A Male to Type C Male
Length: 2m |
 |
PW1996C NEW
|
|
- 1m length.
- USB 3.1 connectivity with speeds up to 5Gbps.
- Suits most operating systems.
- Backward compatible with both USB 2.0 devices (at USB 2.0 speeds).
- Supports data transfer and device charging.
- Supports maximum charging current of 5A.
- White outer sheath with metallic finish plugs.
|
|
USB 3.1 Type C Male to C Male
Length: 1.0m |
 |
S9265 |
|
- Input Voltage: 44-57VDC
- Output Voltage: 5VDC
- Output Current: 2.4A
- Ports: 1 x RJ45 Ethernet Plug
- 1 x RJ45 Ethernet Socket
- 1 x Micro USB Plug
- PoE Standard: IEEE 802.3af
- Network Speed: 10/100Mbps
|
|
Allows you to power Single Board Computer such as the Raspberry Pi via PoE. Micro USB 5V output. Eliminates the need for a local power supply. 12V, 15.4W max. |
 |
S9265A NEW
|
|
- Input Voltage: 44-57VDC
- Output Voltage: 5VDC
- Output Current: 2.4A
- Ports: 1 x RJ45 Ethernet Plug
- 1 x RJ45 Ethernet Socket
- 1 x USB C Plug
- PoE Standard: IEEE 802.3af
- Network Speed: 10/100Mbps
|
|
Allows you to power Single Board Computer such as the Raspberry Pi via PoE. USB C 5V output. Eliminates the need for a local power supply. 12V, 15.4W max. |
 |
S9266 |
|
|
|
Allows you to power non PoE equipped devices
from a 802.3af Power Over Ethernet RJ45 cable.
Eliminates the need for a power supply at the
camera end of the cable run. 12V, 15.4W max. |
 |
S9268 ROHS
|
|
- Connector Type: 1x BNC
- Cable Type: 75-ohm RG59, RG6, or RG11 video-grade coaxial cable
- Max. Transmission Distance: 600m (2000ft.) for the RG6 coaxial cable
- Ethernet Connector: 1x RJ-45 with LEDs on Connector
- Cable Type: Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
- Rate: IEEE 802.3x, Auto-Detection for 10/100Base-T and full / half duplex
- Output Voltage: IEEE 802.3af/at PSE@ RJ45 Port
- LED Indicators: Coaxial Data Signal Strength, Green: GOOD (Link speed > 60Mbps) / Amber: MEDIUM (Link speed 20~60Mbps), Red: BAD (Link speed < 20Mbps) / Off: NO LINK
- Push Button: Reset / Pairing
- Input Operating Voltage: DC 56V / 0.03 - 1.6A
- Power Consumption: 1.5W (w/o power forwarding)
- Operation Temperature: -20°C ~ 60°C
- Humidity: 20% to 85% RH. (non-condensing)
- Storage Temperature: -30°C ~ 80°C
- Dimensions (W×D×H) mm: 38 x 120 x 33
- Weight: 176g
-
-
| Transmission Distance with Power Delivered: COAXIAL Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 5.5W |
-
| 7W |
-
| 9W |
-
| 12W |
-
| 17W |
-
-
-
| Maximum Coax RG6. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 2000m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
-
-
-
| Transmission Distance with Power Delivered: UTP Cable |
-
-
-
Power Delivered
- & Power Source
|
-
Not using
- PoE output
|
-
| 16W |
-
| 18W |
-
| 19.5W |
-
| 20W |
-
| 22W |
-
-
-
| Maximum Cat.5 (4-Pair) UTP Cable. Data Link Distance |
-
-
-
| DC56V Power Supplied |
-
| 600m |
-
| 600m |
-
| 500m |
-
| 400m |
-
| 300m |
-
| 200m |
-
|
|
A 10/100 ethernet over coax transceiver for sending ethernet only (no power) over
coaxial cabling. Two units are required to form a link. Alternatively, it can be used with S 9267 4 way splitter cable to four S 9268 transceivers. Requires 12V DC from either M 9273A or existing 12V supply using P 6715. Maximum coaxial length 2000m. |
 |
S9270 |
|
|
|
These PoE transceiver units allow ethernet and power to be sent along coaxial cabling.
|
 |
S9271 |
|
|
|
Say goodbye to electricians and costly drilling and climbing through roof cavities to power your network devices with this network switch. The switch has Power over Ethernet (PoE) that is built-in to it. |
 |
S9274 |
|
- 1 LAN-In (Data + Power) +1 LAN-Out (Data Only)
- Take Power from PSE
- 5v 12v 24v 48v Passive POE
- 5v 12v 24v 48v Cheap price of cable type passive POE splitter
- Splitter: RJ45 Female to RJ45 Male + Power Out
- Passive PoE - means that input and output voltage are equal.
- Works with all DC powered non-PoE devices
- Supports 5V, 12V, 24V, 48V
- Power supply required for power input - simply use the power supply (wall transformer) that is provided with the device you are trying to power.
- Uses industry standard 5.5mm x 2.1mm power plugs
- Can work up to 150ft (depending on the quality of the cable and the power draw of the device)
|
|
These camera joiners come as a pair and have a transmission distance of under 70m. The input power of the joiners is 12V-48V. The joiners add to a professional appearance for IP camera power cabling. The joiners also make IP camera installation easier by saving time plus creating a more secure cable connection.
|
 |
S9705 |
|
|
|
All use high quality, low loss Mil-Spec ML RG58 coaxial cable. |
 |
S9707 |
|
|
|
SMA male to N male. 300mm length.
All use high quality, low loss Mil-Spec ML RG58 coaxial cable. |
