 |
H0119 ROHS
|
|
|
|
This range of low cost ABS enclosures include mounting ears for surface mounting. In addition, they include a shallow recess on the base and lid to house a membrane or lexan panel. Moulded mounting posts are included in both the base and lid for securing |
 |
H0120 ROHS
|
|
|
|
This range of low cost
ABS enclosures include mounting ears for surface mounting. In addition, they include a shallow recess on the base and lid to house a membrane or lexan panel. Moulded mounting posts are included in both the base and lid for securin |
 |
H9411 |
|
|
|
A wide selection of flanged boxes with snap fit lids which allow access to internal circuitry without unscrewing the flange screws. Great for small circuits, control boxes, relays and industrial controls. Base fitted with four PCB posts, lid has four cable entry mouldings which may be knocked out. All dimensions ±0.5mm & exclude flanges |
 |
H9410 |
|
|
|
A wide selection of flanged boxes with snap fit lids which allow access to internal circuitry without unscrewing the flange screws. Great for small circuits, control boxes, relays and industrial controls. Base fitted with four PCB posts, lid has four cable entry mouldings which may be knocked out. All dimensions ±0.5mm & exclude flanges |
 |
F2011 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 0.78W (0.90W max)
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10%
- Air Flow: 33.0 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF80251V3-1000U-G99. A 12V DC 80mm Sunon Maglev/Vapo Bearing 3 Wire Cooling Fan with thermoplastic frame. |
 |
F0950 |
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Precision ball bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 105g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 200mA (230mA max)
- Rated Power Consumption: 2.40W (2.76W max)
- Operating Voltage Range: 6~13.8V DC
- Starting Voltage: 6V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 4200 RPM ±10% at rated voltage
- Air Flow: 53 CFM
- Static Pressure: 0.30 Inch-H2O
- Noise Level: 44.5dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 70,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart
|
|
Sunon GF80251B3-000U-AE9. A 12V DC 80mm Sunon Ball Bearing Waterproof Cooling Fan with thermoplastic frame. IP68 rated fan. |
 |
F1150 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 0.78W (0.90W max)
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 33.0 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF80251V3-1000U-A99. A 12V DC 80mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame.
|
 |
F1050 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Brushless DC motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 12V DC
- Rated Current: 70mA (84mA max)
- Rated Power Consumption: 0.84W (1.01W max)
- Safety Power Consumption: 1.01W
- Operating Voltage Range: 4.5~13.8V DC
- Starting Voltage: 4.5V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2600 RPM ±10% at rated voltage
- Air Flow: 33 CFM
- Static Pressure: 0.11 Inch-H2O
- Noise Level: 28dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart
|
|
Sunon EF80251S3-1000U-A99. A 12V DC 80mm Sunon Sleeve Bearing Cooling Fan with thermoplastic frame. |
 |
F1120 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Precision ball bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 340g
- Dimensions: 80 x 80 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 60/50Hz
- Rated Current:
- Rated Power:
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2400/2850 RPM ±10%
- Air Flow: 24/31 CFM
- Static Pressure: 0.13/0.19 Inch-H2O
- Noise Level: 32/36.5dB(A)
|
|
Sunon SF23080A-2083HBL.GN. A 240V AC 80mm Sunon Ball Bearing Cooling Fan with diecast aluminium frame.
|
 |
F1121 |
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Precision ball bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 260g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC at 50/60Hz
- Rated Current: 0.07/0.07A
- Rated Power: 14/13.5W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2450/2900 RPM ±10%
- Air Flow: 18/22 CFM
- Static Pressure: 0.13/0.19 Inch-H2O
- Noise Level: 30/34.5dB(A)
- Insulation Resistance: 500MΩ at 500V DC
- Dielectric Strength: 1500V AC for one second
|
|
Sunon SF23080AT-2082HBL.GN. A 240V AC 80mm Sunon Ball Bearing Cooling Fan with diecast aluminium frame. |
 |
F1020 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Shaded pole motor construction
- Motor Protection: Impedance protected
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Die-cast aluminium
- Blade Material: Thermoplastic PBT of UL 94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the blade
- Lead Wire: UL3266, 24AWG, Grey
- Mounting Holes: 8x 4.5mm holes
- Weight: 340g
- Dimensions: 80 x 80 x 38mm
- Electrical Characteristics
- Rated Voltage: 220-240V AC
- Rated Current: 0.09/0.08A
- Rated Power: 18/16W
- Operating Voltage Range: 185-245V AC
- Starting Voltage: 185V AC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 2300/2750 RPM ±10%
- Air Flow: 23.0/30.0 CFM
- Static Pressure: 0.12/0.18 Inch-H2O
- Noise Level: 31.0/35.0dB(A)
- Insulation Resistance: 500MΩ (min) at 500V DC
- Dielectric Strength: 1500V AC for one second
|
|
Sunon SF23080A-2083HSL.GN. A 240V AC 80mm Sunon Sleeve Bearing Cooling Fan with die cast aluminium frame. |
 |
F1125 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Single phase, 4 poles brushless DC motor
- Bearing System: Vapo bearing system
- Frame Material: Thermoplastic PBT of UL94V-0
- Blade Material: Thermoplastic PBT of UL94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan blade
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 65mA (75mA max)
- Rated Power Consumption: 1.56W (1.80W max)
- Safety Power Consumption: 1.68W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10°C ~ +70°C
- Storage Temperature: -40°C ~ +70°C
- Performance Characteristics
- Rated Speed: 3200 RPM ±10% at rated voltage
- Air Flow: 41.0 CFM
- Static Pressure: 0.18 Inch-H2O
- Noise Level: 33.0dB(A)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ at 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for one minute or 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 60,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic restart, polarity protection
|
|
Sunon MF80252V1-1000U-A99. A 24V DC 80mm Sunon Maglev/Vapo Bearing Cooling Fan with thermoplastic frame.
|
 |
F1025 ROHS
|
|
- Mechanical Characteristics
- Motor Design: Brushless DC Motor
- Bearing System: Lubricated sleeve bearing system
- Frame Material: Thermoplastic PBT of UL 94V-0
- Blade Material: Thermoplastic PBT of UL 94V-0
- Direction of Rotation: Counter clockwise viewed from the front of the fan
- Input Power: 4.1W
- Mounting Holes: 8x 4.3mm holes
- Weight: 75g
- Dimensions: 80 x 80 x 25mm
- Electrical Characteristics
- Rated Voltage: 24V DC
- Rated Current: 55mA (64mA max)
- Rated Power Consumption: 1.32W (1.54W max)
- Safety Power Consumption: 1.54W
- Operating Voltage Range: 8~27.6V DC
- Starting Voltage: 8V DC (25°C Power On/Off)
- Operating Temperature: -10 - +70°C
- Storage Temperature: -40 - +70°C
- Performance Characteristics
- Rated Speed: 3200 RPM ± 10% at 24V DC
- Air Flow: 41.0 CFM (3.33 CFM min)
- Static Pressure: 0.18 Inch-H2O (0.13 Inch-H2O min)
- Acoustic Noise: 33.0dB (A) (37.2dB max)
- Insulation Class: UL Class A
- Insulation Resistance: 10MΩ @ 500V DC between internal stator and lead wire (+)
- Dielectric Strength: 500V AC for 1 minute, 600V AC for 2 seconds between housing and lead wire (+)
- Life Expectancy: 35,000 hours at 40°C, 65% RH, 90% CL
- Protection: Automatic Restart
|
|
Sunon EF80252S1-1000U-A99. A 24V DC 80mm Sunon Sleeve Bearing Cooling Fan with thermoplastic frame. |
 |
F1022 ROHS
|
|
|
|
Robust metal grill designed to prevent accidental contact with rotating fan blades. Simply fixes to the chassis via the fan mounting bolts. |
 |
F1024 ROHS
|
|
|
|
80mm robust metal guard designed to prevent accidental contact with rotating fan blades. Simply fixes to the chassis via the fan mounts. |
 |
H9101 ROHS
|
|
|
|
Hammond P/N 1455C801BK |
 |
H0669 |
|
|
|
Thermal Res: 5 deg. C/W |
 |
H0668 ROHS
|
|
|
|
Thermal Res: 5 deg. C/W |
 |
H0322 ROHS
|
|
- Meets IP65 Dust- and Hose-proof standards
- Brass screw thread inserts
- Neoprene gasket seal
- Moulded PCB mounting points
- Manufactured from high impact ABS
- Useable temperature range of -30°C to +80°C
- Available with a solid light grey lid (see H0301) or a polycarbonate clear lid
- 105L x 75W x 40H mm
|
|
Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Supplied with a transparent lid (available with a solid grey lid, see H0302). PCB mounting points are moulded into the enclosure b |
 |
H0302 ROHS
|
|
- Meets IP65 Dust and Hose-proof standards
- Brass screw thread inserts
- Neoprene gasket seal
- Moulded PCB mounting points
- Manufactured from high impact ABS
- Useable temperature range of -30°C to +80°C
- Available with a solid light grey lid or a polycarbonate clear lid (see H 0322)
- 85L x 80W x 55H mm
|
|
Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Supplied with a solid light grey lid (also available with a transparent lid, see H 0322). PCB mounting points are moulded into the |
 |
H0346 ROHS
|
|
|
|
ABS project box ideal for DMM adaptors, test gear, remote controls etc. Features battery compartment with screw on cover and PCB mounting points. |
 |
H0345 ROHS
|
|
|
|
ABS project box ideal for DMM adaptors, test gear, remote controls etc. Features battery compartment with screw on cover and PCB mounting points.
H 0345 Dimensions 160L x 30H x 85W mm. |
 |
H0302F |
|
- Meets IP65 Dust and Hose-proof standards
- Brass screw thread inserts
- Neoprene gasket seal
- Moulded PCB mounting points
- Manufactured from high impact ABS
- Useable temperature range of -40°C to +80°C
|
|
This sealed ABS flange mount enclosure is manufactured by Ritec and measures 85L x 80W x 55Hmm. Its includes mounting flanges for surface mounting. Supplied with neoprene lid sealing gasket. |
 |
H0377 ROHS
|
|
|
|
A stylish range of 4 piece snap together, low profile, instrument cases. |
 |
H0210A |
|
- 68W x 88D x 33H.
- Overall length including mounting flanges 109mm.
- Includes 12mmØ cable entry hole
|
|
Compact plastic housing with mounting flanges. Two models available. |
