| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Audio Level Controller Mono 100W/8 OhmA2110 |
| Mono Audio fader, suitable for remote speaker volume controls. Can also be mounted into speaker boxes or wall plates. 100W rating, suitable for 8&Omega systems. | ||
 |
10mm 55dB Omni-Directional Electret Mic In...C0170 ROHS |
|
| Polar Pattern: Omni-directional Current Drain: 0.8mA max. Impedance: 1k Ohm, ±30% Sensitivity: -55dBm ±3dB Frequency Response: 20Hz-10kHz Dimensions: 10 dia. X 10mm | |
|
10mm 61dB Omni-Directional Electret Mic In...C0171 ROHS |
|
| Polar Pattern: Omni-directional Current Drain: 0.8mA max. Impedance: 1k Ohm, ±30% Sensitivity: -61dBm ±3dB Frequency Response: 20Hz-10kHz Dimensions: 10Ø x 10mm | |
 |
10mm 60dB Omni-Directional Electret Mic In...C0173 ROHS |
| Electret mic insert for replacing broken units or building into audio equipment. | ||
 |
Holder For 10mm Electret Microphone InsertsC0175 ROHS |
| Rubber boot Suits C 0170 and C 0171 | ||
 |
12V Ultra Mini Pull Type SolenoidJ0900 |
|
| These 12V DC pull type solenoids are suitable for a variety of projects requiring a moving actuator. | |
 |
12V Pull Type SolenoidJ0902 |
|
| These 12V DC pull type solenoids are suitable for a variety of projects requiring a moving actuator. | |
 |
15.2X8.53X5.94 Toroid CoreL4517A ROHS |
|
| "Powdered Iron" type. For use in power supplies, RF suppression, or chokes. | |
 |
33 X 19.8 X 11.1 Toroid CoreL4534A ROHS |
|
| "Powdered Iron" type. For use in power supplies, RF suppression, or chokes. | |
 |
10-16 Way Flat Cable CoreL4607 ROHS |
|
| Designed for suppression of electromagnetic interference in ribbon cable. A range of beads are available covering a range of ribbon cables. | |
|
20-26 Way Flat Cable CoreL4626 ROHS |
|
| Designed for suppression of electromagnetic interference in ribbon cable. A range of beads are available covering a range of ribbon cables. | |
 |
6.5mm Clip On Cable CoreL4644 ROHS |
|
| Suitable for high frequency ground current suppression in multi core cables. Maximum cable diameter 6.5mm. Fits a majority of Altronics audio/video cables. | |
 |
8mm Clip On Cable CoreL4669 ROHS |
|
| Suitable for high frequency ground current suppression in multi core cables. Maximum cable diameter 8mm such as RGB and mains cables. | |
 |
7.9mm Ferrite Suppression BeadL4710A ROHS |
|
| Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band. | |
 |
12.3mm Ferrite Suppression BeadL4810A ROHS |
|
| Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band. | |
 |
14.3mm Ferrite Suppression BeadL4820A ROHS |
|
| Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band. | |
 |
28.5mm Ferrite Suppression BeadL4830A ROHS |
|
| Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band. | |
 |
7.9mm Ferrite Suppression BeadL4910A ROHS |
|
| Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band. | |
 |
Large 40-220MHz Core BalunL5230 |
| Neosid Part No.: 1050-1-F14 Operating Freq.: 40-220MHz Material: F14 Ferrite Dimensions (mm): 7.4x13.2x13.5 | ||
 |
Small 40-220MHz Core BalunL5235 |
| Neosid Part No.: 1050-2-F14 Operating Freq.: 40-220MHz Material: F14 Ferrite Dimensions (mm): 7.4x13.2x6.6 | ||
|
Small 40-220MHz Core BalunL5235A |
| Neosid Part No.: 1050-2-F14 Operating Freq.: 40-220MHz Material: F14 Ferrite Dimensions (mm): 7.4x13.2x6.6 | ||
 |
Ferrite Aerial Rod 9.5x200mmL5240 |
|
| Neosid Part No: 37-256-31 Material: F14 Ferrite Wavelength: up to 12MHz Part No.: 9.5 x 200-F14 Dimensions: 9.5mm Ø x 200mm | |
 |
4mm Ferrite Suppression BeadL5250A ROHS |
|
| Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band. | |
 |
Pot Core Transformer PairL5300 |
|
| This transformer core has a low loss and is a high saturation grade, making it perfect for transformers and for use in switchmode power supply applications | |
 |
Bobbin To Suit L5300L5305 |
| Suits L5300. |
